To toggle a Logitech macro on and off, open Logitech G HUB, select your supported device, create or edit a macro, set its repeat behavior to Toggle, and assign it to a button. Press that button once to start the macro repeating; press it again to stop. The exact controls can vary by G HUB version and device, so first confirm that your Logitech gaming mouse or keyboard appears in the app.
A toggle is useful when you want a repeated sequence to keep running without holding a key or mouse button. It is different from a macro that runs once or repeats only while you hold its assigned button. Before setting one up, consider what the macro will do: a repeated keystroke can keep entering text, changing a setting, or triggering an action until you turn it off.
What You’ll Need
- A Logitech gaming mouse or keyboard supported by Logitech G HUB, connected to the computer.
- Logitech G HUB installed and able to detect the device. Download it from Logitech’s official support site if it is not already installed.
- The keystrokes or actions you want the macro to perform, in the correct order.
- For a macro intended to work in a particular game or app, permission under that software’s rules. Some games restrict macros or repeated inputs.
These instructions are for G HUB on Windows. G HUB is also available for macOS, though the interface and available device features can differ. If you use the older Logitech Gaming Software (LGS), see the notes below; its layout is not identical.
Step-by-Step
- Open G HUB and select the right device. Start Logitech G HUB and wait for the device tiles to load. Click the mouse or keyboard you want to configure. If several devices are connected, check the model name so you do not edit the wrong profile. If the device is missing, reconnect it and follow the troubleshooting section before continuing.
- Choose the profile where the macro should work. G HUB can use a desktop profile or a profile associated with a particular game or application. Select the profile shown in the app before changing assignments. If you want the macro available only in one game, make sure that game’s profile is active and correctly linked; otherwise, set it in the desktop profile for general use. Profile behavior can vary by device and app detection.
- Open the assignments area. Select Assignments in the device view. Choose the Macros category or tab, depending on the version of G HUB. This area contains existing macros and the controls for creating one. If you do not see Assignments, check that you selected a device that supports programmable assignments.
- Create a macro. Choose the option to create a new macro, enter a clear name, and confirm. Use a name that describes its task, such as “Repeat action” or “Toggle sequence,” rather than a vague label. If G HUB asks for a macro type at this point, select Toggle. If it first opens the macro editor, continue to the next step and choose the repeat mode there.
- Record or build the sequence. In the editor, choose the option to record keystrokes or add actions, then enter the sequence in the order you need. For a keyboard sequence, include the intended key presses and releases. If the timing matters, add or adjust delays where the editor permits it. Keep the sequence short at first; a simple test makes it easier to tell whether the repeat behavior is working. Stop recording when the sequence is complete, then review the listed actions for accidental extra keys or mouse clicks.
- Set the repeat behavior to Toggle. Find the macro’s repeat or playback setting in the editor. Select Toggle, not No Repeat or Repeat while holding. In toggle mode, pressing the assigned control starts repeated playback, and pressing it again should stop playback. If the setting is not visible, look for a repeat-mode selector near the macro name or playback controls; wording and placement can change between G HUB releases.
- Assign the macro to a button or key. Save the macro if prompted. In the Macros list, drag the new macro onto a programmable mouse button or keyboard key in the device view, or use the assignment control shown by your version of G HUB. Choose a control you can press comfortably and that is not essential for another action. If G HUB will not let you place it on a particular control, that control may not support reassignment.
- Check that the assignment is in the intended profile. Return to the device view and verify that the chosen button or key displays the macro assignment. Then check the active profile name. A correct assignment in the wrong profile can appear to vanish when you launch an app or switch profiles.
- Test it somewhere safe. Open a harmless text editor or another low-risk application. Press the assigned control once and confirm that the sequence repeats as expected. Press it a second time and check that it stops. Do not test a potentially disruptive macro in a document, chat box, or game where repeated input could send messages, alter data, or trigger unintended actions. If the macro types characters, use a blank test document and be ready to stop it immediately.
- Save and check the profile behavior. G HUB generally saves assignment changes as you make them, but confirm the macro remains assigned after changing profiles or restarting the app. If you need the assignment to work when G HUB is not running, check the device’s onboard-memory options and whether that device supports the macro in onboard mode. Complex or software-dependent macros may require G HUB to remain running.
If you use Logitech Gaming Software: Open LGS, select the device and the relevant profile, then open its button or key assignment area and create or edit a macro. Choose the repeat option labeled Toggle if it is offered, and assign the macro to a programmable control. LGS menus and supported features differ by device and software version, so do not expect G HUB’s exact steps or labels to match. Avoid running both configuration apps while troubleshooting the same device.
Common Mistakes
- Choosing the wrong repeat mode. “Repeat while holding” stops when you release the button; it is not a toggle. “No Repeat” runs the sequence once. Select Toggle when you want a press to start and another press to stop.
- Recording the toggle key inside the macro. The button assigned to start and stop playback is a separate control. If its keystroke is also part of the recorded sequence, the macro may trigger an unexpected action or interfere with its own operation. Remove that accidental event from the sequence.
- Testing in the wrong app or profile. A macro may be assigned to a game profile that is not active on the desktop, or vice versa. Verify the active profile before deciding that the assignment failed.
- Using a control with another important job. Replacing a mouse button or key can remove its original function. Pick a spare programmable control, and note its former assignment so you can restore it.
- Making a long or fast macro before confirming the basics. A lengthy sequence makes errors harder to identify. Start with a short sequence and a modest delay, confirm the toggle starts and stops, then adjust the macro carefully.
- Assuming every Logitech device supports macros. Basic office mice and keyboards may not expose programmable assignments in G HUB. Compatibility depends on the exact model and its supported software.
Tips
- Give the macro a descriptive name. This makes it easier to distinguish a repeating toggle from one-shot and hold-to-repeat macros later.
- Choose an easy-to-reach stop control. The same button that starts the toggle usually stops it. Avoid a control that is difficult to reach while the macro is running.
- Build in realistic timing. If the target application needs time between inputs, use delays supported by the editor. A sequence that works in a text editor may behave differently in an app that responds slowly.
- Keep a simple test sequence available. A short, harmless macro helps separate a device or profile issue from a problem in a complicated sequence.
- Check application rules first. Repeated inputs can be restricted by games, workplace software, or other services. Follow the applicable rules and do not use a macro to automate prohibited play or activity.
- Review onboard-memory limits. Some devices store only certain assignment types or profiles on the device. If the macro stops working after closing G HUB, check the model’s supported onboard features rather than assuming the assignment was lost.
Troubleshooting
The macro does not appear in the assignment list: Confirm that you created it in the profile currently selected and that you are viewing the correct device. Restart G HUB if its list has not refreshed. If the device has no programmable assignments, the macro may not be assignable to it.
One press does not start the macro: Open the macro editor and verify that the sequence contains actions and that its mode is Toggle. Check the assignment on the device image and press the assigned control while the correct profile is active. If another assignment occupies that control, remove or change the conflicting assignment.
It repeats but will not stop: Press the assigned control once more and wait briefly for the current playback cycle to finish. Confirm that the macro is actually set to Toggle and that you are pressing the same control that starts it. If it continues, switch to a harmless test app, disconnect or disable the problematic assignment if possible, and restart G HUB. Do not keep testing in a place where repeated input could cause harm.
It stops as soon as you release the button: The macro is probably set to Repeat while holding. Edit the macro and change the mode to Toggle, then save and test again. If Toggle is unavailable, your device, software version, or selected assignment type may not support it.
The macro works on the desktop but not in a game or app: Check that the correct application profile is linked and active. Some applications run with elevated permissions, so G HUB may need to run with compatible permissions for assignments to work; use only settings allowed by your organization and the app. Also check whether the application blocks macros or repeated input. Do not try to bypass its restrictions.
G HUB does not detect the device or changes do not stick: Reconnect the device, try a different USB port if it is wired or uses a receiver, and restart G HUB. Check Logitech’s support information for your exact model, update G HUB through its official channel, and confirm that you are not editing the same device with LGS at the same time. If a profile is involved, verify that it is saved and selected. Menu names may differ after an update.
Frequently Asked Questions
What does Toggle mean for a Logitech macro?
It means the assigned control starts repeated macro playback when pressed and stops it when pressed again. It is not the same as holding the control down for continuous playback.
Can I make a Logitech macro toggle on and off with a keyboard key?
Yes, if the keyboard and the selected key support programmable assignments in G HUB. Create the macro with Toggle behavior and assign it to a suitable key. Avoid replacing a key you need for normal typing.
Does G HUB need to stay open?
It may. Whether an assignment works with G HUB closed depends on the device and whether its onboard-memory mode supports that macro. Test the behavior with your model and check its official documentation.
Can I use this with any Logitech mouse or keyboard?
No. Macro assignment and toggle support are available only on compatible devices and may vary by model, software, and assignment type. If the device does not show an Assignments or Macros area, check Logitech’s support page for that model.
Why is Toggle missing from the macro options?
Possible reasons include an older software version, a device that does not support the feature, or an assignment mode that offers fewer repeat options. Check for G HUB updates and your model’s documentation. If you use LGS, its available controls vary by device.
Can a toggle macro cause problems if I forget to stop it?
Yes. Repeated keystrokes can keep acting in the active app. Test in a safe place, choose an accessible stop control, and press it again as soon as you are finished. Avoid using macros where repeated input is prohibited.
Related
- How to Group Rows in JMP
- How to Subtotal Data in Excel and Summarize Groups
- How to Combine Parts in Onshape with Boolean Union
Try it: the Column Letter to Number: aA is 27, XFD is 16,384. Converts both ways.
More in VBA & macros
- Excel VBA Array Add: Append Values with ReDim PreserveTo add an item to a VBA array, resize a dynamic array with ReDim Preserve, then assign the…
- Reset Used Range in Excel VBA: Safe Steps and CodeTo reset an inflated used range in Excel VBA, delete the unused rows below and columns to the…
- Excel VBA: Find Unique Entries in a ColumnTo find distinct entries in an Excel column with VBA, loop through the data, add each value only…
- VBA: Open a UserForm When a Command Button Is ClickedTo open an Excel VBA UserForm when a worksheet button is clicked, assign a public macro to a…
- Excel VBA Clear Cell Fill Color: Methods and ExamplesTo clear a cell’s fill color with VBA, set its Interior.Pattern to xlPatternNone, such as Range("A1").Interior.Pattern = xlPatternNone.…
- VBA Copy and Paste Values Across All Excel Tabs SafelyYes. In Excel for Microsoft 365 on Windows, a VBA macro can take the selected range on the…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.