To combine solid parts in Onshape, open the Part Studio containing them, choose Boolean from the feature toolbar, set the operation to Union, select the parts, and confirm with the green check mark. Boolean Union merges selected solids into one part; if you need a single continuous solid, position the parts so they touch or overlap first. You will need an editable Part Studio with the parts available, rather than an Assembly where components are positioned with mates.
What You’ll Need
- An Onshape document and permission to edit it.
- A Part Studio containing the solid parts you want to combine. If the parts are currently in separate Part Studios, you will need to bring them into one Part Studio first, for example by using the Insert parts workflow.
- A clear idea of whether you want one continuous solid or simply want to keep several components together in an Assembly. Those are different modeling outcomes.
Step-by-Step
- Open the right Part Studio. In the document tabs, open the Part Studio that contains the solids you want to merge. The parts should appear in the graphics area and in the Parts list, usually at the lower left. If you are looking at an Assembly tab, switch to a Part Studio: Boolean is a Part Studio feature, not an Assembly command. You can still use an Assembly to position components, but that does not fuse them into one solid.
- Check that the parts are solid and positioned correctly. Rotate the model and inspect the faces where the parts are meant to meet. For a continuous result, the solids need to touch or intersect; a visible gap will leave separate regions rather than create a solid bridge. Overlap is often the clearest choice when you are joining pieces, because it gives the Boolean operation shared volume to resolve. If the parts are intended to remain physically separate, consider keeping them as separate parts instead of using Union.
- Start the Boolean feature. Click Boolean in the Part Studio feature toolbar. If you do not see it, look among the feature tools or use the toolbar’s available feature search, if shown in your interface. The Boolean dialog opens. Its controls depend on the selected operation, so choose the operation before making selections if the dialog has not already selected Union.
- Choose Union. Set the Boolean operation to Union. This tells Onshape to combine the selected solids, rather than remove material or keep only their shared volume. Subtract is for cutting one part with another, and Intersect keeps the common volume; neither is the right operation for an ordinary merge. Check the operation label before proceeding, especially if you have used Boolean recently and the dialog retains a previous choice.
- Select the parts to combine. Click the parts in the graphics area, or select their entries in the Parts list. Add every part that should become part of the result, and verify that each intended part is highlighted or listed in the dialog’s selection field. If clicking the model selects a face or edge instead of a whole part, use the Parts list or change the selection filter so you can select parts. Avoid selecting unrelated solids that happen to be nearby.
- Preview and confirm the result. Inspect the preview from more than one angle. Check that the selected solids are included, the intended join has formed, and no other geometry has disappeared. If the preview is correct, click the green check mark to accept the feature. If it is wrong, cancel or edit the dialog, correct the operation or selections, and preview again before confirming.
- Verify the Part Studio and feature tree. Look at the Parts list to see the resulting part count and inspect the Boolean feature in the feature list. A successful union of touching or overlapping solids that form one connected shape will normally leave one resulting part in place of the selected parts. Hide and show the result or rotate it to check the join. If you need to make a later change, edit the Boolean feature rather than rebuilding the model from scratch.
Common Mistakes
Trying to union components in an Assembly. Assembly components are instances of parts positioned by mates. Mates control their placement; they do not fuse geometry. If the goal is a single solid for downstream modeling or manufacturing, create or edit the geometry in a Part Studio. If the goal is simply to keep components together in a design, leave them in the Assembly.
Choosing the wrong Boolean operation. Union, Subtract, and Intersect have different results. Union combines selected material, Subtract removes tool geometry from a target, and Intersect retains the common volume. A preview that appears to remove most of the model is a reason to check the operation before confirming.
Assuming proximity is the same as contact. Two parts can look joined at a distant zoom level while a small gap remains. A Boolean union cannot create a connecting bridge across empty space. Zoom in at the joint, use a section view if helpful, or adjust the sketch, extrusion, or part position so the geometry actually touches or overlaps.
Selecting faces rather than complete parts. The Boolean feature needs parts as its inputs. Selecting a face may not add the intended solid, or it may leave the selection incomplete. Check the selection field and use the Parts list to choose whole parts when graphics-area selection is ambiguous.
Combining parts that should stay independently editable. A union changes the Part Studio’s resulting geometry. If components need separate materials, movement, or replacement in an Assembly, preserving them as separate parts is usually more appropriate. You can keep an earlier version or branch of the design if you need both a merged and an unmerged outcome.
Tips
- Name parts before merging. Descriptive names in the Parts list make it easier to select the intended solids, particularly in a crowded model. Rename parts before starting the Boolean feature if several entries have generic names.
- Use a deliberate overlap for a robust join. If you are designing a bracket, housing, or other continuous object, extend one solid slightly into the other rather than relying on two faces meeting exactly. This avoids a tiny unintended gap caused by a sketch dimension or placement.
- Work from the feature history. If the Boolean fails after a later design change, inspect the sketches and features that define the input parts. Fixing the source geometry is usually more reliable than trying repeated Boolean selections on top of an invalid shape.
- Keep an unmerged design when it has value. Separate parts are useful for assemblies, material assignments, and component-level changes. Decide whether you need a single part for modeling or export before combining anything; a visually joined assembly may be all you need.
- Check the intended deliverable. A single Part Studio part can be useful for a single-body workflow, but it does not automatically make a model ready for every manufacturing process. Inspect wall thickness, clearances, and the exported file after modeling if those details matter to the next step.
Troubleshooting
The Boolean tool will not accept a selection: Confirm that you are in a Part Studio and selecting solid parts, not Assembly instances, sketches, surfaces, faces, or edges. Use the Parts list to make the selection unambiguous. If a desired item is not listed as a solid part, check how it was created and whether its generating feature completed successfully.
The feature reports an error or the preview fails: First check that the selected parts are valid solids and that the operation is Union. Look for very small faces, sliver geometry, or edges that only meet at a point; these can make a join difficult or invalid. Try moving or editing the source geometry to create a clear overlap, then reopen or edit the Boolean feature and preview again. If there are many inputs, test the union with two parts at a time to identify which pair causes the problem.
The result still appears to be multiple pieces: Rotate and zoom in to see whether there is a gap. If the parts are deliberately separated, union cannot make them physically connected without additional geometry. Add a bridge, extend one part, or reposition the parts. If the selected pieces do touch but you still see separate results in the Parts list, edit the feature and make sure all intended parts are actually selected.
A part disappeared or material was removed: Edit the Boolean feature and check that Union is selected, not Subtract or Intersect. Also check which parts were selected. Cancel the edit if needed, restore the expected inputs, and confirm only after the preview shows the desired material.
You cannot find the parts because they are in another Part Studio: Open the destination Part Studio and use its insert-parts workflow to bring in the needed geometry, then select the inserted parts for the Boolean operation. If the inserted parts are linked to their source, changes to the source may update the destination; consider whether that linked behavior suits your design before relying on the merged result.
The model looks merged but remains several components in an Assembly: That is expected if you only positioned the components with mates. To create a single solid, use the corresponding part geometry in a Part Studio and apply Boolean Union there. If you only need the components to move as a group in the Assembly, use assembly relationships rather than changing the solid geometry.
Frequently Asked Questions
Does Boolean Union delete the original parts?
It replaces the selected input geometry with the resulting Boolean geometry in the Part Studio feature history. The feature remains editable, so you can change its selections or operation. Keep a version or copy if you need a separate design state with the original parts individually available.
Can I combine parts that do not touch?
You can select multiple parts for Union, but separated solids do not become one continuous shape merely because they are selected together. For a continuous object, make the solids touch or overlap, or add connecting geometry. If you only need to collect separate components, keep them as separate parts or use an Assembly.
Can I merge parts from different Part Studios?
Yes, bring the needed parts into the same Part Studio first, such as through the insert-parts workflow, then use Boolean Union. They must be present as usable solid geometry in that Part Studio. Check whether inserted geometry is linked to its source so you understand how later edits may affect it.
Is Boolean Union the same as grouping parts?
No. Union combines solid geometry into a Boolean result. Grouping or assembling components preserves them as separate parts and controls how they are organized or positioned. Choose Union when you need merged geometry; choose an Assembly when the parts must remain independently selectable or movable.
Can I undo a Boolean Union?
Because Onshape keeps a feature history, you can edit or remove the Boolean feature in the Part Studio to return to an earlier modeling state, provided later features do not depend on it in a way that needs repair. Editing the feature is generally preferable when you only need to change its inputs.
Should I use Union before exporting a model?
Only if the receiving workflow needs a merged part. Some processes expect one solid, while assemblies or multi-part exports may need separate components. Check the requirements of the application, supplier, or manufacturing process and inspect the exported geometry before treating the file as final.
Related
- Example Project Timeline in Excel: Build a Clear Plan
- Excel Power Query: Share a File and Control Access
- Equipment Checklist Template Excel: Build a Reliable Tracker
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Excel Row Formatting: How to Format and Manage RowsYes. In Excel for Microsoft 365 on Windows, select a row by clicking its number at the left…
- How to Delete a Filter View in Google SheetsTo delete a filter view in Google Sheets, open the spreadsheet in a web browser, go to Data…
- Identify External Links in Excel and Find Their SourcesIn Excel for Microsoft 365 on Windows, start at Data > Workbook Links to see links to other…
- Excel vs SharePoint Lists: Which Should You Use?Use Excel when you need flexible calculations, analysis, or charts; use a SharePoint list when people need to…
- Merge or Unmerge Cells in Google Sheets? Choose WellIn Google Sheets, select the cells, then choose Format > Merge cells and pick a merge option; to…
- Excel Table Borders: Add, Change, and Print ThemTo add borders to an Excel table in Microsoft 365 for Windows, select the cells, then choose Home…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.