To loop a PowerPoint slideshow in Microsoft 365 for Windows, open the presentation and choose Slide Show > Set Up Slide Show. Under Show options, select Loop continuously until Esc, then select OK and start the show. The presentation will return to its first slide after the last one; pressing Esc ends the slide show.
That setting makes the deck repeat, but it does not by itself make slides advance automatically. For a hands-free display, also set slide timings or rehearse them, and tell PowerPoint to use those timings. The distinction matters for reception screens, trade-show displays, and other situations where nobody is clicking through the presentation.
What looping does—and what it does not do
A looping slideshow plays the slides in sequence, then starts over at the beginning rather than stopping at the end. It repeats the presentation as a whole; you do not need to duplicate the slides to create a longer deck. The setting is useful when a presentation should remain visible for an extended period, such as a set of announcements on a lobby monitor.
Looping and automatic advancement are separate behaviors. A deck can be set to loop but still wait for a person to click before moving between slides. Conversely, slides can advance automatically and reach the end, then stop if continuous looping is not enabled. For an unattended display, configure both the slide timing and the loop setting.
Also, looping the slideshow is different from looping a video embedded on a slide. A video has its own playback controls, including a loop option, while the slideshow loop determines what happens after the presentation reaches its final slide.
Set up a basic looping show
Use these steps in the PowerPoint desktop app for Microsoft 365 on Windows:
- Open the presentation and select the Slide Show tab.
- Select Set Up Slide Show.
- In the dialog box, find Show options and check Loop continuously until Esc.
- Select OK.
- Start the show with Slide Show > From Beginning, or press F5. To begin from the selected slide, use Slide Show > From Current Slide or Shift+F5.
Once the final slide finishes, PowerPoint returns to slide one. To stop the running show, press Esc. The loop setting is saved with the presentation, but it does not generally launch the slideshow by itself when someone opens the file: the viewer still needs to start the show.
On PowerPoint for Mac, look on the Slide Show tab for Set Up Show or the equivalent setup command; wording and ribbon layout can vary slightly by release. Choose the continuous-loop option in that dialog. If you cannot find the command, use the PowerPoint desktop app and check that the ribbon is showing its full set of commands. PowerPoint for the web has a more limited set of slideshow setup controls, so configure the loop in the desktop app when the option is unavailable in the browser.
Make slides advance automatically
For a monitor or unattended presentation, decide how long each slide should remain visible. A slide with a short title may need only a few seconds; a slide containing several announcements or instructions needs longer. Set and preview timings rather than applying one duration blindly to every slide.
- Select a slide, or select several slides in the thumbnail pane if they should share a duration.
- Open Transitions. In the Timing group, under Advance Slide, select After and enter a duration.
- If you want that duration on every slide, select Apply To All. Review slides with unusually dense content and adjust their timing separately if needed.
- Open Slide Show > Set Up Slide Show and make sure Using timings, if present is selected under Advance slides.
- Confirm that Loop continuously until Esc is selected, then run the show and watch it through at least one full cycle.
Depending on the selected transition settings, a slide may also advance on a mouse click. If the display must run without an operator, make sure its slides have usable automatic timings and test that the show does not pause waiting for a click. Timing controls are in the Transitions tab; they are not the same as animation timing, which controls when objects such as text or pictures appear within a slide.
You can also use Slide Show > Rehearse Timings to record how long you spend on each slide while presenting. PowerPoint saves those timings for the show. Rehearsal is helpful when the slides contain narration or when the pace should follow spoken content, but review the results: an accidental pause or a long explanation can leave a slide on screen much longer than intended.
Use kiosk mode for unattended displays
For a display that should run unattended, the setup dialog offers a show type called Browsed at a kiosk (full screen). Select it when the audience should not move through slides using the normal presenter controls. Kiosk mode is often paired with timed advancement and continuous looping, so the slides run repeatedly without someone operating the keyboard or mouse.
Kiosk mode is not a substitute for setting timings. If slides are not configured to advance automatically, the presentation may wait on a slide instead of continuing as expected. Test the file on the actual display before relying on it. If viewers need to navigate to specific information, consider adding links or action buttons and verify that they work in the chosen show type.
To leave a kiosk slideshow, press Esc on the computer. If the screen is in a public place, plan who can access the keyboard and how the presentation will be restarted after it is stopped. Kiosk mode changes how the show behaves while it is running; it does not prevent someone from editing the PowerPoint file.
Choose settings for the kind of presentation
The right configuration depends on whether someone is presenting or the slides are acting as a display. A speaker-led deck usually benefits from manual control, while an unattended display needs timed advancement. Consider the audience, the equipment, and how the show will be stopped before choosing a setup.
- Live presentation: Enable looping only if you genuinely want the slides to start over at the end. Keep manual advancement if the speaker needs to control the pace.
- Lobby or event screen: Set automatic timings, enable continuous looping, and test the presentation in full-screen mode on the intended monitor.
- Self-running information display: Consider kiosk mode, but provide enough time to read each slide and a clear route for staff to exit or restart the show.
- Presentation with narration: Use recorded timings only after checking that the narration and slide changes stay in sync from the beginning through the loop back to slide one.
For example, a six-slide welcome deck might show a title for eight seconds, event directions for twenty seconds, and a schedule for thirty seconds. Those values are only a starting point: test whether viewers can read the information comfortably from the distance at which the screen will be viewed. A slide that looks readable on a laptop may be difficult to scan on a wall-mounted display.
Common looping problems and fixes
The show stops on the last slide. Reopen Slide Show > Set Up Slide Show and check Loop continuously until Esc. Start the slideshow again to confirm the change. Merely setting a transition time does not enable looping.
The show loops but does not move forward. Check that automatic advancement is configured. In Transitions > Timing > Advance Slide, select After and enter a duration. Also confirm that Using timings, if present is selected in the slide show setup dialog. A loop setting cannot make slides advance on its own.
Some slides advance too quickly or too slowly. Inspect their individual transition timings. Apply To All can make the deck consistent, but it can also overwrite a longer timing needed for a text-heavy slide. Preview the entire sequence, including the transition from the last slide back to the first.
The show works on one computer but not another. Confirm that the correct presentation file was copied and that it still contains the setup and timing changes. Also check whether the receiving computer is opening the file in PowerPoint desktop or a browser, since available controls can differ. Test with the actual computer, screen, and sound setup that will be used at the venue.
A video or animation stops even though the deck loops. The slideshow loop applies to the sequence of slides, not necessarily to every media object. Check the video’s playback settings separately. For a video selected on a slide, look on the Playback tab for Loop until Stopped where that option is available, and test the video along with the slide timings.
Alternatives to a looping PowerPoint file
If the presentation only needs to be watched as a video, you can export it instead of running the slideshow. In PowerPoint for Windows, use File > Export > Create a Video, select a video quality, and choose whether to use recorded timings and narrations or a default time for each slide. Review the resulting video before displaying it. Exporting creates a separate file; it does not change the slideshow loop setting in the original presentation.
A video can be convenient on a playback device that handles video more reliably than a PowerPoint presentation, but it is less flexible: viewers cannot use the usual slideshow controls to jump between slides, and any changes require exporting the video again. For a presentation that needs clickable links or interactive choices, keep it as a PowerPoint slideshow and test those interactions in the selected show mode.
If only one clip on a slide needs to repeat, use the clip’s own playback settings rather than looping the entire deck. If the entire deck should repeat, use the slideshow setup option. Choosing the correct level of looping avoids a common surprise: a video can repeat on one slide while the presentation itself still stops at its final slide.
Frequently Asked Questions
How do I loop a PowerPoint slideshow continuously?
Choose Slide Show > Set Up Slide Show, select Loop continuously until Esc, and select OK. Start the slideshow to apply the setting during playback.
Will PowerPoint automatically advance slides when looping?
Not necessarily. Looping controls what happens after the final slide. To advance without clicks, set slide durations in Transitions > Timing > Advance Slide > After and enable Using timings, if present in the setup dialog.
How do I stop a PowerPoint slideshow that is looping?
Press Esc while the slideshow is running. In a kiosk setup, Esc is also the usual way to exit the full-screen show.
Can I make only one video loop in PowerPoint?
Yes. Select the video and check its playback options for Loop until Stopped. That setting repeats the video, whereas Loop continuously until Esc repeats the entire slide sequence.
Does a PowerPoint loop setting remain after I close the file?
The setting is saved with the presentation, so it can remain when the file is reopened. It does not normally start playing automatically on opening; someone must start the slide show.
Related
- Loan Amortization Schedule Spreadsheet: Excel Guide
- PowerPoint Timeline: How to Make an Engaging Slide
- How to Make an E-Poster in PowerPoint
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- XLOOKUP in Google Sheets: Search Across Two SheetsTo look up a value on another Google Sheets tab, put the value to find in A2 and…
- Excel Find Hidden Names: Locate, Review, and Manage ThemTo find hidden defined names in Excel for Microsoft 365 on Windows, run a short VBA macro that…
- Google Sheets Google Translate: How to Translate CellsTo translate text in Google Sheets, enter a formula such as =GOOGLETRANSLATE(A2,"auto","es") in an empty cell. It translates…
- How to Flip a List in Excel Upside Down: 3 Simple WaysTo flip a list upside down in Excel, add a numbered helper column, sort the whole list by…
- Protect an Excel Sheet Without Locking Cells: How It WorksYes. In Excel for Microsoft 365 on Windows, unlock the cells people should be able to edit, then…
- Excel Power Query: How to Insert a RowPower Query does not provide a worksheet-style command to insert a row directly into a query result. To…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.