How to Make an E-Poster in PowerPoint

How-to basics · Updated November 21, 2026

To make an e-poster in PowerPoint, create a single slide at the required dimensions, organize the information into clear sections, and export the finished slide as a PDF or image. Check the event’s size, orientation, and file-format rules before you start; setting the slide size first helps prevent layout problems later.

What You’ll Need

  • Microsoft PowerPoint for Microsoft 365 on Windows or Mac.
  • The poster requirements, including dimensions, orientation, file type, and any required logos or disclosures.
  • Your finished text, data, charts, and images, plus permission to use any material you did not create.
  • A place to save the editable PowerPoint file and the final exported version.

Step-by-Step

  1. Confirm the delivery requirements. Find out whether the poster will be viewed on a screen, uploaded to a conference portal, displayed on a large monitor, or printed. Check the required width and height, portrait or landscape orientation, maximum file size, accepted formats, and whether one slide is expected. Use the organizer’s exact dimensions rather than assuming a standard paper size. If no size is provided, choose a landscape or portrait layout that suits your content and intended display, and make a note of the dimensions for anyone reviewing the file.
  2. Start with a clean, single-slide presentation. Open PowerPoint and choose Blank Presentation. Remove extra slides if the file opens with more than one, since most e-posters are delivered as a single-page document. Save an editable copy using File > Save As before designing. A clear filename, such as “Research-Poster-editable.pptx,” makes it easier to distinguish the source file from the export you will submit.
  3. Set the slide dimensions before adding content. In Windows, go to Design > Slide Size > Custom Slide Size. Enter the required width and height, choose Portrait or Landscape if the dialog offers that choice, and select Ensure Fit if PowerPoint asks how to adjust existing content. With a blank slide, there should be little or nothing to resize. In PowerPoint for Mac, use Design > Slide Size > Page Setup and enter the custom dimensions; wording and dialog layout can differ slightly by version. Do this now because changing the ratio after designing can shift or crop objects.
  4. Plan the reading order. Before inserting objects, decide what someone should notice first, second, and third. A practical structure is a prominent title across the top, a short introduction or objective beneath it, two or three main content areas, and a conclusion or key takeaway near the bottom. Add author names, affiliations, references, acknowledgements, and contact details where required. For a poster with several columns, plan the reading path from left to right and then down. Leave space between sections so the layout does not feel crowded.
  5. Build a simple visual grid. Use View > Guides or View > Gridlines to help align headings, text boxes, and images. Drag guides to mark consistent margins and column edges. Keep a clear gap between sections, and align objects to shared edges instead of placing each item by eye. Guides and gridlines are editing aids and do not appear in the exported poster. Avoid making every column exactly full; open space helps readers distinguish one section from another.
  6. Add a readable title and section headings. Choose Insert > Text Box, click or drag on the slide, and type the title. Add separate text boxes for headings and body copy so you can arrange and format them independently. Use a short, specific title and make it the strongest text on the page. Keep headings consistent in size, color, and style. At a common 11-by-17-inch slide size, a title around 32–44 points and body text around 18–24 points can be a useful starting point, not a rule. Adjust for the actual dimensions and viewing distance, and test the exported file at a realistic screen size.
  7. Insert and format the main content. Put one main idea in each section. Prefer concise phrases, short paragraphs, and lists over dense blocks of prose. To add a chart, use Insert > Chart, or copy a chart from a workbook and check that its labels remain readable. For an existing image, use Insert > Pictures and choose the file. Resize from a corner handle to preserve its proportions; avoid stretching a logo or photograph. Add a brief caption where readers need context, and make sure charts have clear labels rather than relying on color alone to explain categories.
  8. Apply a restrained visual style. Use a small set of coordinated colors, with strong contrast between text and its background. A light background with dark text is usually easy to read on screens, but follow any brand or event requirements. Keep body text in a legible typeface and use bold or color sparingly to draw attention to important terms. Use Home > Arrange options, such as Align, to tidy up selected objects. Do not use decorative effects that make letters, charts, or images harder to distinguish.
  9. Review the slide as a reader. Run spelling and grammar checks, verify names and numbers, and confirm that every required section is present. Zoom out until the whole slide fits on screen: the main message should still be apparent, and the title and section divisions should be easy to find. Then zoom in to inspect small labels, image quality, and text wrapping. If possible, ask someone unfamiliar with the topic to identify the main point after a brief look. Revise anything that makes the reading order or takeaway unclear.
  10. Export and check the final file. Keep the PowerPoint file as your editable source. For a portable document, choose File > Export > Create PDF/XPS in PowerPoint for Windows, then select PDF and save. On Mac, use File > Export and choose PDF as the file format; the labels may vary slightly by release. If the organizer requests an image, use File > Export and select PNG or JPEG where available, then follow the prompt for exporting the current slide. Open the exported file and inspect it at full-page view and at close range. Check that the dimensions, edges, fonts, charts, and images appear as intended before uploading.

Common Mistakes

  • Designing at the wrong size: Starting with a default widescreen slide and changing it at the end can move objects or leave awkward gaps. Set the required dimensions before laying out the poster.
  • Putting too much text on the slide: A poster is not a report pasted onto a page. Shorten background details, explain only what supports the main point, and direct readers to references or supplementary material when appropriate.
  • Making text tiny to fit: Shrinking every paragraph makes the poster difficult to read. Edit the wording, simplify the content, or create a clearer column layout instead.
  • Using low-quality or stretched images: Small images can look blurry when enlarged, while stretched logos look distorted. Use original, high-resolution files and preserve image proportions.
  • Trusting the PowerPoint view alone: Fonts, line breaks, or object positions can look different after export or on another computer. Always inspect the actual PDF or image you plan to submit.

Tips

  • Write the title and takeaway so a reader can understand the subject without reading every section.
  • Use headings that communicate meaning, such as “Results” or “Recommendations,” rather than vague labels such as “Section 2.”
  • Keep repeated elements consistent: use the same heading style, spacing, and alignment throughout.
  • Use charts only when they clarify a comparison or trend. Remove unnecessary gridlines and explain abbreviations that readers may not know.
  • Keep a version with editable objects. Export a separate final file, and do not overwrite the source when making a last-minute change.
  • If the poster will be displayed on a large screen, preview it at the expected viewing size if possible. A layout that looks good while zoomed in may be hard to read from a distance.

Troubleshooting

The slide content shifts after changing its size: Undo if the result is clearly wrong, then restore the required dimensions and reposition objects using guides. For a heavily designed poster, save a copy before resizing so you can compare versions. It is usually quicker and safer to set the size first and rebuild the layout than to force a finished design into a different shape.

Text is cut off or wraps unexpectedly: Widen or lengthen the text box, reduce unnecessary wording, or adjust line spacing slightly. Check for an accidental line break or a box that extends beyond the slide edge. Do not solve every overflow problem by reducing the font to an unreadable size.

Images look blurry in the export: Replace them with a larger original image rather than enlarging a thumbnail. For charts or diagrams, consider recreating them with PowerPoint shapes or charts so text and lines stay crisp. If the upload system accepts PDF, use PDF for a poster containing a mixture of text and graphics.

The PDF looks different from the slide: Export again after saving the PowerPoint file, then open the new PDF in a separate viewer. Check for missing fonts, cropped edges, or altered line breaks. If a font changes on another computer, use a commonly available font or check PowerPoint’s font-embedding options on your platform, subject to the font’s licensing and the recipient’s requirements.

The upload is rejected or too large: Confirm the portal’s exact file type and size limit. If it accepts PDF, export a PDF rather than submitting the editable presentation. If an image is required, choose the requested format and dimensions; reduce oversized photographs or remove unused media, then export again. Do not change the page dimensions unless the organizer permits it.

Frequently Asked Questions

Should I make an e-poster in portrait or landscape?

Use the orientation specified by the event. If there is no specification, choose the orientation that gives your content a natural reading order and enough room for readable text. Match the slide ratio to the display or upload requirements whenever those are known.

Can I make an e-poster on one PowerPoint slide?

Yes. A single slide is a convenient format for a poster that will be exported as one PDF page or image. Confirm that the event accepts a one-slide file and set that slide to the required dimensions.

Should I submit a PowerPoint file or a PDF?

Submit the format requested by the organizer. PDF is often useful for sharing because it preserves a fixed page layout, while PowerPoint is useful when the recipient needs to edit the design. Keep both versions until the submission is accepted.

Can I use a PowerPoint template?

Yes, but check that the template’s dimensions, fonts, and layout suit the event’s requirements. Remove sample content and decorative elements you do not need. A template is a starting point, not a substitute for checking the finished export.

How do I make sure the poster is readable?

Use clear contrast, short text, consistent headings, and font sizes suited to the slide dimensions and viewing distance. Review the whole slide at fit-to-window size, then inspect small details in the exported file. If readers must zoom heavily to follow the content, simplify the layout or enlarge key text.

Can I add animations or video?

You can add them in PowerPoint, but they may not work in a PDF or static image. Use motion only if the poster will be presented in PowerPoint and the event permits it; otherwise, make sure the essential information is visible on the slide without playback.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.