Split a Solid Body in SOLIDWORKS: Steps and Tips

How-to basics · Updated November 22, 2026

To split a solid body in SOLIDWORKS, create a plane, surface, or other suitable trim tool that crosses the body, then choose Insert > Features > Split. Select the trim tool, click Cut Part, and decide whether to keep the resulting bodies together in the part or save them as separate part files.

What the Split feature does

Split divides solid geometry into two or more separate bodies inside a part document. The key distinction is that the result is initially a multibody part, not automatically a set of independent SOLIDWORKS part files. The bodies share one part document and its feature history unless you use the save option to create separate files.

The feature uses a trim tool to determine where the original solid is divided. A plane can make a straight planar cut; a surface or suitable face can define a more complex division; and a sketch can provide a profile for a split where the geometry and feature allow it. The tool must divide the solid into distinct regions. For example, a plane passing across a rectangular block can produce two solid bodies, while a plane that only touches an edge may not divide the volume at all.

Splitting is useful when you need to model components in one file, prepare separate pieces for manufacturing, or create different regions for later operations. It is not the same as removing material: a successful split partitions the existing volume, while a cut feature removes material and changes the part’s overall volume.

Prepare a trim tool that crosses the part

Before opening Split, decide where the division belongs and create the geometry that will define it. For a simple cut, select a reference plane or create one at the required offset. For a shaped boundary, create a surface or another appropriate tool that passes through the solid. A tool that stops short of the body or merely touches it cannot create the intended separation.

Check the model from more than one view. A plane that appears to cross the part in the graphics area might actually be parallel to a narrow section or miss a protruding feature. If the target is a specific physical interface, use dimensions and references rather than positioning the tool by eye. This makes the split more predictable when upstream features change.

  • Choose a plane when a flat, measurable separation is required.
  • Choose a surface when the dividing boundary needs curvature or another nonplanar shape.
  • Use a sketch-based approach only when its profile and the feature’s selection requirements create valid resulting regions.
  • Review whether small details, fillets, or thin walls will create tiny fragments that are difficult to use downstream.

Save the part before major feature changes if you are working on a complex model. This is not a substitute for maintaining a proper revision or backup, but it gives you a safe checkpoint before changing the body structure.

Split a body step by step

  1. Open the part and create or identify the plane, surface, face, or sketch that will act as the trim tool.
  2. Choose Insert > Features > Split from the menu. The Split PropertyManager opens.
  3. In Trim Tools, select the intended tool in the graphics area or FeatureManager design tree. Confirm that the selection is the dividing geometry, not the body you want to divide.
  4. Click Cut Part. SOLIDWORKS calculates the regions and lists the resulting bodies in the PropertyManager.
  5. Inspect the preview and resulting-body list. Rotate the model and confirm that the number and shape of the pieces match the design intent.
  6. If the results are correct, accept the feature with the green check mark. If not, cancel or adjust the trim tool and calculate the cut again.

The exact controls and labels can vary somewhat by SOLIDWORKS release, but the central workflow remains selecting a trim tool, calculating the cut, and reviewing the resulting bodies. Do not accept the feature just because the preview shows a line on the part: verify that it produced separate volumes rather than only a visible edge or surface intersection.

Keep the pieces together or save separate files

After a successful split, you can leave the resulting bodies in the original part. This is often the simplest choice when the pieces are related, need to remain positioned together, or are still being developed as one design. They appear as separate solid bodies in the part’s Solid Bodies folder, and you can select them for later body-level operations.

If each piece needs its own part document, use Save Bodies from the Split workflow or the related save-bodies command available in the part environment. Select the bodies to save, specify file names and locations, and, where offered, choose whether to create an assembly from the saved bodies. Review the selections carefully: the purpose is to produce files for the intended pieces, not merely to create another copy of the entire original part.

Saved body files are useful for drawings, component-level detailing, and assembly work. Keep in mind that saving bodies does not mean the geometry is necessarily independent of its source. SOLIDWORKS can maintain references between the source multibody part and saved body documents, so edits to the source may affect the saved geometry. If you need a detached deliverable, check the external-reference status and the requirements for your handoff before breaking links or distributing files.

For a supplier or another CAD system, confirm the requested format and deliverable structure. A native part file preserves SOLIDWORKS features and references better than a neutral export, while formats such as STEP are commonly used to exchange geometry. Exporting is a separate decision from splitting: a split does not by itself determine which file type or packaging your recipient needs.

What to do after splitting

Once the bodies exist, you can work with them individually while retaining the convenience of one source model. For instance, a designer might split a molded enclosure into a cover and a base, keep both bodies aligned in the same part, and then save them separately when preparing component drawings. Another example is dividing a block into two machining blanks, with the split plane placed where the stock will actually be separated.

Feature order matters. A split placed late in the tree can use the completed shape, including many earlier details. If later features depend on one of the resulting bodies, review their references after editing the split or its trim tool. Changing the trim geometry can change the number, shape, or identity of the bodies, which may cause downstream features or saved-body references to need attention.

Use clear body names when several results look similar. Descriptive names such as Cover, Base, or LeftBracket are easier to manage than generic body labels, especially in larger multibody models. Naming conventions also help distinguish design bodies from temporary or construction geometry.

Split versus Split Line, Cut, and separate parts

A common source of confusion is the difference between Split and Split Line. Split creates separate bodies by dividing solid geometry. Split Line projects or uses a curve to divide faces or mark boundaries on a model; a visible line made with Split Line does not automatically turn one solid into two bodies. Use Split Line for face regions, appearance boundaries, or downstream operations that need a face division, not when the requirement is two separate solid pieces.

A cut feature, such as an extruded cut, removes material. Use it when the design needs a slot, hole, opening, or removed section. Use Split when the intention is to partition the solid into distinct bodies without treating one side as waste. The resulting pieces may still be touching or fit together, but they are separate bodies in the part model.

Creating separate part files is another distinct step. Split can create bodies within a single part; Save Bodies can create part documents from selected bodies; and an assembly can then organize components as a product structure. Choose the method based on whether you need one editable multibody source, individual component files, or an assembly with component instances.

Common problems and practical fixes

  • No bodies appear after Cut Part: Check that the trim tool actually crosses the solid and divides its volume. Move or extend the tool, or choose a different plane or surface.
  • The cut produces an unexpected number of pieces: Inspect the entire model for additional intersections. One tool can divide separate regions or create extra fragments if it crosses multiple sections.
  • A tiny sliver body appears: The trim tool may pass close to a corner, fillet, or thin feature. Adjust the plane or redesign the boundary if that fragment is not intentional.
  • The feature fails after an upstream edit: A change to the source geometry may cause the trim tool to miss the body or create invalid regions. Edit the Split feature and reselect or reposition the tool, then inspect dependent features.
  • The model shows a line but remains one solid: A visible intersection is not proof of a successful split. Check the Solid Bodies folder and the Split preview; consider whether you used Split Line instead of Split.
  • A saved body does not update as expected: Check the source part, file references, and external-reference state. Moving or renaming linked files can disrupt references, so keep related documents together and use SOLIDWORKS file-management tools when relocating them.

When a result is confusing, use the feature preview and inspect body count rather than relying only on shading or an apparent seam. Also check the FeatureManager tree for warnings and rebuild errors. A successful model should rebuild cleanly after the split and any intended downstream features.

Frequently Asked Questions

Can I split a solid body with a plane in SOLIDWORKS?
Yes. A plane is a common trim tool for a straight planar division. It must intersect the body in a way that separates the volume into distinct regions; a plane that only touches the body will not make two solid bodies.

Does Split create separate SOLIDWORKS files automatically?
No. Split creates separate bodies in the part document. Use Save Bodies when you want selected bodies written as individual part files, and create an assembly if your workflow requires one.

Why does Split show a line but not make two bodies?
A line can show where geometry intersects without proving that the solid has been divided. Confirm that the trim tool passes through the volume, click Cut Part, and check the resulting-body list. Also make sure you did not use Split Line, which divides faces rather than necessarily creating separate solids.

Can one split feature make more than two bodies?
It can produce multiple resulting bodies when the trim geometry divides the original solid into multiple distinct regions. Inspect the preview and body list, because extra intersections or small fragments may create more pieces than intended.

Can I undo a split later?
You can edit or delete the Split feature in the FeatureManager design tree, subject to downstream dependencies. If other features or saved files rely on its bodies, changing or removing it can affect those references, so review the model and dependent documents before making the change.

Choosing the right workflow

For a quick geometric division, use Split and keep the resulting bodies together. For components that need separate drawings or file identities, save the appropriate bodies and manage their references deliberately. For a mark or face boundary without separate solid pieces, use Split Line instead. Matching the command to the intended result prevents a common modeling detour: creating a visible seam when you actually need multiple bodies, or creating extra bodies when you only need to remove material.

Before delivering the model, rebuild it, verify the body count, and open any saved files or assembly that the workflow created. Confirm that file names, locations, and references are correct. That final check helps ensure the split is not only geometrically right in the source part but also usable in the drawings, assemblies, and manufacturing handoff that follow.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.