Split Lung Function Test: How It Measures Each Lung

Formulas & functions · Updated November 22, 2026

A split lung function test estimates how much each lung contributes to breathing, rather than measuring the lungs only as a combined pair. It is most often discussed when doctors are assessing someone before lung surgery, but the exact test may be a nuclear medicine perfusion scan, another imaging method, or a calculation based on standard lung-function results.

What the test means

“Split lung function test” is a descriptive term, not the name of one universally standardized test. The central idea is to divide total lung function into right- and left-sided contributions. That information can help a clinical team estimate how much function would remain if a lung, lobe, or other area were removed or is already working poorly.

Ordinary spirometry measures airflow from both lungs together. It can report values such as forced expiratory volume in one second (FEV1), the amount of air forcibly exhaled in the first second, and forced vital capacity (FVC), the total amount forcibly exhaled after a full breath in. These measurements are important, but they do not by themselves show which lung supplies what share of the total.

A split-function assessment adds information about distribution. For example, a person might have a reasonable combined FEV1 even though one lung contributes much less than the other. That distinction matters when planning an operation that could remove tissue or when evaluating an uneven lung condition.

Why clinicians request it

The best-known use is before a planned lung resection, such as removal of a lobe (lobectomy) or an entire lung (pneumonectomy). The team wants to estimate postoperative lung function, not merely know the current total. If the area scheduled for removal contributes little function, the expected loss may be smaller than its size alone suggests. If it contributes substantially, the predicted effect may be greater.

Results are considered alongside symptoms, imaging, other lung-function tests, the reason for surgery, and the person’s overall health. A split-function result is not a stand-alone decision about whether someone can have surgery. Clinicians may also request regional measurements when lung disease, airway obstruction, or a structural problem affects one side more than the other, although the purpose and test choice depend on the case.

  • Before lung resection: to estimate the function expected to remain after the planned removal.
  • With uneven disease: to understand whether one lung or region is contributing less than expected.
  • For treatment planning: to add regional detail when combined spirometry does not answer the clinical question.

How a perfusion scan splits lung function

A common way to estimate each lung’s contribution is a quantitative lung perfusion scan, also called lung perfusion scintigraphy. It uses a small amount of radioactive tracer injected into a vein. The tracer travels in the blood to the lungs, and a gamma camera records its distribution. More detected tracer in one lung generally indicates a larger share of pulmonary blood flow to that lung.

The person usually lies on an imaging table while pictures are taken from several angles. The scan may use front, back, and side views, and the imaging team may mark the right and left lungs on the images to calculate their relative contributions. The appointment length and exact protocol vary by department. Some assessments include ventilation imaging as well, which looks at the distribution of inhaled air; ventilation and perfusion are related but are not the same measurement.

A perfusion scan measures blood-flow distribution, not airflow or oxygen transfer directly. Clinicians use it as a regional estimate of function because healthy, useful lung tissue generally needs both air and blood supply. If blood flow is uneven, the scan can help show how much the lung planned for removal contributes to the total perfusion.

Other ways to estimate each side

Not every patient needs a nuclear scan. For some planned operations, clinicians estimate the function that will remain by counting functioning lung segments on imaging and combining that estimate with spirometry. The usual segment-count approach assumes that the segments being removed and retained contribute relatively evenly. That assumption may be less dependable when disease is distributed unevenly.

Quantitative computed tomography (CT) can assess lung volume or density by region, and some centers use software-based methods to estimate regional function. These approaches differ in what they measure and how they are validated. A ventilation-perfusion study, quantitative CT, and segment counting should not be treated as interchangeable: the clinician selects a method based on the operation, scan findings, local practice, and the specific question.

Standard pulmonary function testing may include spirometry and a diffusing-capacity test (DLCO), which estimates how effectively gas passes from the air sacs into the blood. Exercise testing may be added if resting tests do not give enough information about risk. These tests assess different aspects of breathing; a split-function scan complements them rather than replacing them.

How results are used before surgery

For an operation that removes an entire lung, the predicted postoperative FEV1 or DLCO can be estimated by multiplying the preoperative value by the fraction of measured perfusion expected to remain. For example, if a person’s preoperative FEV1 is 2.4 liters and the lung expected to remain receives 55% of total perfusion, a simple estimate is 2.4 × 0.55 = 1.32 liters. This is an illustrative calculation, not a personal prediction; the care team may use different measurements or adjust the approach.

For a lobectomy, a segment-count calculation may be used. In simplified terms, the team estimates the fraction of functioning segments that will remain and multiplies that fraction by the preoperative FEV1 or DLCO. A scan-based method may be more useful when the distribution of function is clearly uneven. The calculation depends on the planned operation and the assumption that the measured contribution represents the tissue that will remain.

Predicted postoperative values are interpreted with other clinical information. A value is not a guarantee of a particular recovery, and two people with the same estimate may have different symptoms or exercise capacity. If the estimated reserve is concerning or uncertain, the team may discuss additional exercise testing, a different operation, non-surgical treatment, or other ways to reduce risk.

Preparing for the appointment

Preparation depends on the test. For a perfusion scan, patients are commonly asked to wear comfortable clothing and remove metal objects that could interfere with imaging. Fasting is often not required, but instructions from the imaging department take priority. Tell the staff about pregnancy or possible pregnancy, breastfeeding, allergies, recent imaging, and medicines or health conditions they ask about.

Bring the referral information and relevant prior chest imaging if the clinic has requested it. Ask whether you should take usual medicines and whether the appointment includes a ventilation component. Do not stop a prescribed medicine unless the clinician or testing center specifically instructs you to do so.

During the scan, it is important to remain as still as possible while images are acquired. The injection may cause a brief needle-prick sensation. If you feel unwell or have difficulty lying in position, tell the staff. The scan itself is generally non-invasive apart from the injection used for perfusion imaging.

Safety, limitations, and common misunderstandings

Perfusion scintigraphy involves exposure to a small amount of ionizing radiation from the tracer. The amount and clinical justification depend on the protocol; the referring clinician and nuclear medicine team weigh the expected benefit against radiation exposure. Pregnancy should be discussed before the scan. Breastfeeding instructions can vary with the specific tracer and local policy, so ask the department for individualized guidance rather than assuming feeding can continue or must stop for a fixed period.

A split-function result is an estimate, not a direct measurement of future breathing after surgery. It may be affected by how the regions are outlined, the distribution of disease, image quality, and the assumptions used to predict what will remain. A perfusion scan shows blood-flow distribution; it does not independently diagnose every lung condition or establish that an operation is safe.

A frequent misconception is that a “normal” total spirometry result means both lungs are equally healthy. Combined measurements can conceal differences between sides. The reverse is also important: a low contribution from one lung does not automatically mean that it should be removed or that the other lung can fully compensate. The full clinical picture matters.

Access, timing, and cost

Availability depends on the hospital and the clinical question. A nuclear medicine department may perform the scan, while spirometry and DLCO testing are often done in a pulmonary-function laboratory. Results may be interpreted by a radiologist or nuclear medicine physician and then reviewed by the referring specialist or surgical team.

There is no single price for a split lung function test. The cost depends on the country, facility, type of scan, whether ventilation imaging is included, and insurance or health-system arrangements. Before booking, ask the facility which test has been ordered, whether authorization is needed, what the expected charge is, and when the report will be available. A report may take longer than the imaging appointment because it must be interpreted and considered alongside other results.

Frequently Asked Questions

Is a split lung function test the same as spirometry?

No. Spirometry measures airflow from both lungs together. A split-function test or estimate adds information about the relative contribution of each side, often using imaging. Both may be used in the same preoperative assessment.

Does the test hurt?

A perfusion scan usually involves an injection into a vein, which can cause a brief needle-prick sensation. The imaging is painless, though lying still may be uncomfortable for some people. Tell the staff if you have concerns about needles or positioning.

How long does a lung perfusion scan take?

Timing varies with the department’s protocol and whether additional ventilation imaging is performed. The scan appointment may take longer than the image-taking itself because of preparation and positioning. The facility can give the most accurate estimate for your booking.

Does a low result mean I cannot have lung surgery?

Not necessarily. The result is one part of a broader assessment that may include spirometry, DLCO, exercise capacity, imaging, symptoms, and the planned operation. The treating team interprets the estimate in that context and discusses the available options.

Is a split lung function test always a scan?

No. The term can refer generally to estimating each lung’s share. Depending on the clinical question, clinicians may use a perfusion scan, quantitative imaging, or a segment-based calculation combined with standard pulmonary-function results.

Related

Try it: the Formula Explainer: paste any formula and see each function and reference in plain English.

More in Formulas & functions

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.