A split function renal scan is a nuclear medicine test that estimates how much each kidney contributes to the pair’s overall kidney function. It can help clinicians assess unequal kidney function, drainage, or damage, but the result is interpreted alongside symptoms, blood tests, and imaging—not as a diagnosis on its own.
What “split function” means
Healthy paired kidneys do not always contribute exactly the same amount. A split function result, also called differential renal function or relative renal function, expresses each kidney’s share as a percentage. For example, a result of 40% for the left kidney and 60% for the right means the scan estimated that the left kidney provided 40% of the measured combined contribution and the right provided 60%.
The percentages add to 100%, but they do not tell you the total amount of kidney function in the body. If both kidneys are working poorly, they may still appear to contribute roughly equally. Conversely, one kidney can contribute less while the other compensates. Blood tests such as creatinine and estimated glomerular filtration rate (eGFR) help assess overall kidney function; a split function scan answers a different question about the relative contribution of each side.
There is not one percentage that is automatically normal for every patient or every scanning method. Clinicians consider the measured difference, the scan technique, the patient’s age and anatomy, prior results, and the reason for testing. A small difference may have little practical importance, while a marked or changing difference may prompt closer evaluation.
Why a clinician may order the scan
The test is useful when knowing which kidney is doing more work could affect diagnosis, monitoring, or treatment. Common reasons include investigating suspected blockage, following a known urinary tract abnormality, or checking whether one kidney has lost function over time.
- Possible obstruction: A clinician may want to know whether urine is draining from a kidney and whether a suspected narrowing is affecting its function.
- Unequal kidney size or appearance: Ultrasound, CT, or MRI may show a difference that needs a functional assessment.
- Children with urinary tract conditions: The scan may be used in evaluating conditions such as ureteropelvic junction narrowing or monitoring certain congenital abnormalities.
- Prior infection or scarring: Some scan types can show cortical defects that may be associated with past kidney injury.
- Planning treatment: Relative function can be one factor when clinicians consider procedures that may affect a kidney, including surgery for an obstructed or poorly functioning kidney.
The scan is not automatically needed whenever an ultrasound shows a dilated kidney. Dilation can have several causes, and the clinical question determines whether a functional study will add useful information.
Which type of renal scan is used
“Renal scan” can refer to different nuclear medicine studies. The tracer and imaging method are selected to answer a particular question, so the name of the test matters when interpreting a report.
A dynamic scan commonly uses technetium-99m MAG3 or, in some situations, technetium-99m DTPA. Images are taken as the tracer travels through the bloodstream, is taken up by the kidneys, and passes into the collecting systems and bladder. MAG3 is extracted by kidney tubules and is often useful when kidney function is reduced or drainage is being assessed. DTPA is filtered by the glomeruli and can be used to estimate filtration, although the preferred test depends on the clinical context and local practice.
A DMSA scan is different. It typically uses static images to assess the kidney cortex, including the distribution of functioning cortical tissue and possible scarring. It can provide relative cortical function, but it is not the same as a dynamic drainage study and does not answer the same questions about how quickly urine empties.
The ordering clinician or imaging department can clarify which tracer is planned and whether the purpose is to compare function, evaluate drainage, look for cortical defects, or combine these assessments.
How the test is performed
For a dynamic study, a small amount of radiotracer is usually injected into a vein, often in the arm. A gamma camera records images while the tracer moves through the kidneys. The camera detects radiation from the tracer; it does not produce the images by using X-rays or injecting iodinated CT contrast. The patient generally lies still on a table, and the camera may be positioned above or behind the body.
Depending on the question, imaging may continue for roughly 20 to 40 minutes, with extra time if additional views or drainage measurements are needed. Some protocols include a diuretic medicine, commonly furosemide, to increase urine flow and help assess whether slow drainage improves when urine production rises. In other cases, images may be taken after the patient empties their bladder or while standing. A DMSA scan has a different schedule; images are often acquired after time has passed following the injection, rather than continuously during tracer transit.
A typical appointment may include these steps:
- Staff confirm the reason for the study, relevant medicines, pregnancy possibility, and any preparation instructions.
- The tracer is given through an IV, and the patient is positioned for imaging.
- The camera captures timed images. The patient may be asked to drink water, urinate, change position, or receive a diuretic, depending on the protocol.
- A nuclear medicine physician reviews the images and measurements and sends a report to the ordering clinician.
The scan itself is usually painless apart from the IV. Remaining still helps produce clear images, but staff can explain how to signal if the patient needs assistance.
How split function is calculated and interpreted
For many dynamic studies, software compares tracer uptake in a region around each kidney during an early part of the scan. The computer corrects for background activity and other technical factors, then estimates each kidney’s fraction of the total measured uptake. The exact time window, regions of interest, and calculation method can vary by tracer, equipment, and protocol.
A report may give percentages, describe relative uptake as symmetric or asymmetric, and comment on kidney shape, tracer transit, and drainage. For instance, an estimated 35% contribution from one kidney may be described as reduced relative function compared with the other side. That number alone does not establish why the difference exists or how much function is present in absolute terms. It must be matched to the patient’s history and other findings.
Technical factors can affect the measurement. Kidney position, motion, body habitus, background correction, very low function, and the timing of images may complicate analysis. In infants and young children, age-specific technique and interpretation are important. If a result is unexpected or borderline, the clinician may compare it with earlier scans, request review of the images, or choose follow-up testing rather than treating one percentage as definitive.
Changes over time are often more informative when scans were performed with comparable methods. A difference between two reports may reflect a true change, but protocol or measurement variation can also contribute. The nuclear medicine report should be interpreted by the clinician who knows why the test was ordered.
Split function is not the same as a drainage result
A frequent source of confusion is treating reduced drainage as proof of obstruction. A dynamic renogram evaluates both tracer handling and its movement out of the kidney, but slow washout can have more than one explanation. A dilated collecting system may retain tracer even without a clinically significant blockage, and a kidney with poor function may not move tracer in the expected way.
When a diuretic is used, the physician assesses the images and drainage measurements in context, including how much tracer was taken up, whether the bladder was full, and whether emptying or a change in position altered the appearance. A single washout number should not be interpreted in isolation. The scan may support or argue against functionally important obstruction, but the conclusion is based on the whole study and clinical picture.
Preparation and what to expect afterward
Preparation depends on the scan protocol and the patient’s health. Many patients are asked to drink fluids beforehand or arrive well hydrated, because dehydration can affect urine flow and image interpretation. Some may be asked to empty the bladder before imaging. Fasting is not routinely required for every renal scan, but instructions can differ, especially if sedation or another procedure is planned. Follow the imaging department’s directions rather than changing medicines or fluid intake without asking.
Tell the care team about pregnancy or possible pregnancy, breastfeeding, kidney or heart conditions that affect fluid intake, allergies or prior reactions to medicines, and medicines that could affect urination. If a diuretic is planned, staff can consider whether it is appropriate and explain likely effects. Children may have different preparation needs, and a parent or guardian can ask the department how to help the child remain still.
Most people can return to routine activities afterward. Drinking fluids and urinating as usual may be encouraged to help clear the tracer, unless a clinician has prescribed fluid restriction. The ordering clinician usually discusses the results after the nuclear medicine physician has reviewed the study; the timing depends on the facility and clinical situation.
Safety, radiation, and possible side effects
Renal scintigraphy uses a small amount of radioactive tracer. The administered activity is selected for the patient and the test, and the resulting radiation exposure is generally considered low, although no medical radiation exposure is zero. The tracer is not the same as iodinated contrast used for many CT scans. Reactions to radiotracers are uncommon, but the IV can cause brief discomfort or bruising, and a diuretic can increase urination or occasionally cause light-headedness or dehydration.
Pregnancy should be discussed before the test because the care team may recommend postponing imaging or considering another approach. If breastfeeding, ask the nuclear medicine department for instructions specific to the tracer and dose; any recommended pause and duration should come from the department, not a general rule. People with heart failure or other conditions requiring limited fluids should not force extra water without medical advice.
The ordering clinician weighs the expected benefit of the information against radiation exposure and alternatives. Patients should ask the team about individual risks, particularly if they are pregnant, breastfeeding, very young, or have significant medical conditions.
How it compares with other kidney tests
Ultrasound shows kidney size and structure without ionizing radiation, and it can reveal dilation, stones, or some anatomical abnormalities. It does not directly measure each kidney’s functional share. CT and MRI provide detailed anatomical information, and some specialized techniques estimate function, but they do not necessarily replace a nuclear medicine study when the question is how each kidney handles a tracer or drains urine.
Blood and urine tests are important for overall kidney health, but routine blood results generally reflect the combined performance of both kidneys rather than the separate contribution of each. A split function scan fills that specific gap. Depending on the question, it may complement rather than replace ultrasound, CT, MRI, laboratory tests, or clinical follow-up.
Frequently Asked Questions
Does a 50/50 result mean both kidneys are completely healthy?
No. It means the kidneys contributed similar shares of the measured uptake. Both could have reduced overall function, so clinicians consider blood tests, symptoms, and other imaging as well.
Is the scan painful?
The scan is not usually painful. The IV needle may cause a brief sting, and lying still can be uncomfortable for some people. If a diuretic is given, it can make the patient need to urinate.
Can a renal scan show whether a kidney is blocked?
A dynamic renogram can help assess drainage and whether a suspected obstruction is affecting function. Slow tracer clearance alone does not always prove a blockage, so the full study and other clinical findings matter.
How long does it take to get results?
The imaging may take from around half an hour to longer, depending on the scan type and extra steps. The final report must be reviewed and sent to the ordering clinician; ask the facility when and how results will be discussed.
Does the test measure total kidney function?
Its split percentages show relative contribution, not the total filtration capacity of the body. Blood tests such as creatinine and eGFR are commonly used to assess overall kidney function.
Related
- F-Strings in JavaScript: Use Template Literals Instead
- Graphing the Line y = -1: Points, Slope, and Examples
- Google Sheets SPLIT Function: How to Separate Text
Try it: the Formula Explainer: paste any formula and see each function and reference in plain English.
More in Formulas & functions
- Excel Formula for Age From Date of BirthThe simplest Excel formula for age from a date of birth is =DATEDIF(A2,TODAY(),"Y"), assuming the birth date is…
- Round Down in Excel: Formulas for Specific Decimal PlacesTo round a value down to a chosen number of decimal places in Excel, use the ROUNDDOWN function.…
- Daily Timesheet Excel Formula: Calculate Hours CorrectlyFor a daily timesheet with a start time in B2, an end time in C2, and an unpaid…
- Sort Excel Rows by Column Value: A Practical GuideTo sort rows in Excel by a column value, click a cell in the data, then choose Data…
- Link Different Sheets in Excel with FormulasTo link a cell on one Excel sheet to a cell on another, enter a reference such as…
- Excel Formula for Checking Dates: Validity and RangesIf the date is in A2, use =ISNUMBER(A2) to check whether Excel stores it as a numeric value;…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.