Split a Part in Onshape: Steps, Uses, and Fixes

How-to basics · Updated November 22, 2026

To split a part in Onshape, open the Part Studio, create or choose a plane, face, or surface that passes through the part, then use the Split feature and select the part and splitting tool. Keep both resulting sides if you want two parts; the feature changes the model, not the physical object.

What splitting means in Onshape

Onshape is a browser-based parametric CAD system, and solid parts are generally created and edited in a Part Studio. A Split feature divides a selected part where a suitable tool intersects it. When the tool cuts completely through a solid and both sides are retained, the result is typically two separate parts listed in that Part Studio. Those parts can then be selected separately for later features or inserted separately into an Assembly.

Splitting is not the same as drawing a line on a face. A line may be useful as sketch geometry, but by itself it does not divide a solid into two independently selectable parts. Nor does a split remove a strip of material: the two resulting sides meet along the split boundary unless a later feature changes their shape. This distinction matters when designing a real saw cut, machining allowance, or gap between components.

The Split feature is parametric. It appears in the feature history, and its result depends on the selected part and splitting tool. If you later move the plane or edit the tool surface, Onshape can regenerate the split. That is usually more flexible than creating two unrelated solids from scratch, but it also means later features may need attention if the split changes the shape or identity of the resulting parts.

Basic workflow for a plane cut

A plane is a straightforward splitting tool for a flat, predictable division. It can be an origin plane, a planar face on the model, or a construction plane you create at a chosen offset or angle. The essential requirement is that the plane intersect the part in a way that divides it. A plane that only touches the outside or misses the solid will not produce the intended two-sided cut.

  1. In the Part Studio, identify the part to divide and decide where the cut should pass.
  2. If an existing plane is in the right place, use it. Otherwise create a plane with the Plane feature, choosing a suitable reference such as a face, edge, vertex, or existing plane and setting its position or angle.
  3. Choose Split from the Part Studio feature toolbar.
  4. Select the target part, then select the plane as the splitting tool in the feature dialog.
  5. Keep both sides if you need both resulting portions. Confirm the feature and inspect the model and Parts list.

For example, to divide a rectangular housing into a top and bottom half, place a plane through its middle and split the housing with that plane. If the goal is instead to separate a short end cap from the housing, position the plane at the boundary of the cap. The feature follows the plane; it does not infer a desired component boundary from the design intent.

Choosing the right splitting tool

Use the simplest tool that expresses the intended boundary. A plane is ideal for a straight planar division. A planar face can serve as the tool when an existing face already defines the cut location. A nonplanar face or surface can create a curved division, provided it intersects the selected solid appropriately. In practice, constructing a dedicated surface or plane can make the model easier to understand and edit than relying on an unrelated face elsewhere in the design.

  • Plane: useful for a straight cut, a centered division, or a cut at a controlled angle.
  • Existing face: convenient when the face itself is the intended boundary and is stable in the model.
  • Surface: useful for a curved or otherwise nonplanar boundary. The surface must extend through the solid enough to divide it as intended.

Consider how the tool will behave if upstream geometry changes. A plane referenced to an origin plane and an explicit offset may remain meaningful as the part changes. A plane attached to a small face that may disappear can be more fragile. This is a general parametric-modeling consideration: references that clearly express design intent are often easier to maintain.

Split a face or split a solid?

People often use the word split for two different jobs: dividing a solid into separate parts, and dividing a face into smaller selectable faces without separating the solid. Onshape’s Split feature supports part and face splitting workflows; use the appropriate split operation or mode shown in the feature dialog for the task. If the goal is to create two components that can be selected and assembled independently, split the part. If the goal is only to create a boundary on a surface for a later modeling operation, splitting a face may be enough.

For instance, dividing a cylindrical face into regions can help define where a later feature applies, but it does not automatically make two cylinders or two physical components. Conversely, splitting a solid through its full thickness creates separate solid regions when both sides are retained. After confirming, check the Parts list and click each resulting part to verify the outcome rather than judging only by the visible line on the model.

Keeping, removing, and using the results

When a split creates two sides, the option to keep both sides is important. If only one side is retained, the result is a trimmed part rather than two retained components. For a two-piece design, ensure both sides remain in the result and inspect the Parts list. The exact controls and selection prompts can vary as Onshape’s interface evolves, so follow the current dialog’s selections and preview rather than relying on an assumed default.

Once the split is successful, the parts remain in the same Part Studio unless you take additional steps to organize or use them elsewhere. You can give the pieces meaningful names in the Parts list, apply later features to one or both, and insert them as separate items into an Assembly. If the parts are intended to fit together, use the assembly workflow to position and constrain them; splitting alone does not create an assembly mate or define how the pieces move.

A split also does not create clearance. If two pieces must have a physical gap, account for that in the geometry with an appropriate offset or separate feature. A zero-clearance split can be useful for a conceptual division or matching components, but manufactured parts may require tolerances, kerf, or clearance based on the process and design requirements.

Common problems and how to diagnose them

If the feature fails, start by checking the intersection. The splitting tool must actually cross the selected part in a way that separates the solid. A plane that stops short, a surface that only grazes an edge, or a tool that lies entirely outside the part cannot create the intended division. Use the preview, rotate the model, and verify the tool’s position from more than one angle.

  • No split appears: confirm that the correct part and tool are selected and that the tool intersects the solid. If it merely touches at an edge or point, reposition or extend the tool.
  • Only one piece remains: check whether both sides are being kept. If the intention is to create two parts, enable the option to retain both sides where offered.
  • The wrong part is divided: select the intended solid explicitly, especially in a Part Studio containing several nearby parts. Hide other parts temporarily if selection is difficult.
  • The split changes after an edit: inspect the feature’s references and the upstream plane or surface. A changed reference or altered intersection can produce a different result.
  • A later feature fails: edit the downstream feature and check which resulting part it references. A split can change the available regions or the part a later operation was meant to use.

For a complicated model, suppressing or hiding unrelated geometry while selecting can make the target clearer. Also inspect the feature list for earlier failed features: a Split feature may report an error because its source geometry is already invalid, not because the split command itself is inherently unsuitable.

Split compared with other ways to divide geometry

Choose Split when a plane, face, or surface should define where a part is divided. Use a Boolean operation when the design calls for one solid to cut, add to, or intersect another solid. For example, a cylindrical cutter used to make a round hole is usually a subtractive operation, while a plane separating a block into two retained chunks is a split. These operations can produce similar-looking boundaries but express different design intent.

Another option is to model the components separately from the beginning. That can be clearer when the pieces have substantially different features or will be designed independently. A split is often convenient when the starting shape is naturally one continuous solid and a defined boundary is needed later. For a real-world cut with material removed, model the kerf or gap rather than assuming the Split feature represents blade thickness.

Think of the result you need before choosing: separate selectable parts, a face boundary, a removed volume, or merely a visual mark. A sketch or cosmetic line may be sufficient for a drawing or reference, while a solid split is necessary for separate part selection. Selecting the operation by outcome avoids adding geometry that looks right but behaves incorrectly downstream.

Frequently Asked Questions

Can I split a part in Onshape with a sketch?
A sketch line alone does not divide a solid. Create a suitable splitting plane, face, or surface from the geometry, or use a workflow that produces a valid splitting tool. The tool must intersect the part in a way that separates it.

Does splitting a part create a new Part Studio?
No. The split results are normally separate parts in the same Part Studio. You can use them independently there or insert them separately into an Assembly.

How do I keep both halves after splitting?
In the Split feature, select the part and splitting tool, then use the control for retaining both sides if it is available in the dialog. Confirm and check the Parts list to verify that both pieces were created.

Can I split a part with a curved surface?
Yes, a suitable nonplanar face or surface can be used as a splitting tool. It must intersect the solid sufficiently to form the intended division; inspect the preview and resulting parts carefully.

Why does Split not work when the plane touches the part?
A plane that only touches the solid without dividing its volume does not create two separate sides. Move the plane so it crosses the solid, then confirm that both resulting regions are retained.

Does a split add a gap between the pieces?
No. A split defines a boundary but does not model saw kerf or assembly clearance. Add the required gap or material removal with suitable geometry if the manufactured design needs it.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.