To run a PowerPoint slideshow continuously in Microsoft 365 for Windows, open the presentation and select Slide Show > Set Up Slide Show. Under Show options, check Loop continuously until ‘Esc’, then select OK. Start the slideshow; it will return to the first slide after the last and keep repeating until you press Esc.
Set up the continuous loop
The loop setting belongs to the presentation’s slide-show setup, so it stays in effect when you save the file. It does not change the order or contents of the slides. To enable it on Windows:
- Open the presentation in the PowerPoint desktop app.
- Select the Slide Show tab, then Set Up Slide Show.
- In the Set Up Show dialog box, find Show options and select Loop continuously until ‘Esc’.
- Select OK, save the presentation, and start the show to check the result.
On a Mac, open the Slide Show tab and choose Set Up Slide Show, then select the same loop option and confirm. Ribbon wording or placement can differ slightly between app versions, but the option is in the slide-show setup dialog. If you cannot find it in PowerPoint for the web, open the file in the desktop app to configure the full set of show options.
What the loop setting does—and what it does not do
With looping enabled, PowerPoint moves from the final slide back to the first slide rather than ending the show. It keeps repeating until someone presses Esc. The setting alone does not make slides advance automatically: if the presentation is set to advance on mouse click, it will wait for a click on each slide, including each time it loops.
It also does not automatically open the presentation, start the slideshow, or keep a computer awake. Those are separate tasks. For example, a presentation can be configured to loop correctly but still need a person to open the file and start the show. A loop is also different from an animated image or video: it repeats the slide sequence, not necessarily an animation embedded on a slide. Individual animations and media have their own playback settings.
Set slide timings for hands-free playback
For a display that needs to run without an operator, set a duration for each slide. Select a slide, open Transitions, and look in the Timing group for Advance Slide. Select After and enter the time the slide should remain visible. Repeat for slides with different durations, or select Apply To All if every slide should use the same timing. Make sure the option to advance on mouse click is cleared if accidental clicks should not affect playback.
For example, a welcome slide might stay up for 10 seconds, while a slide with detailed event information might need 25 seconds. Those times are only examples; choose intervals that give people enough time to read without making the display feel stalled. Once timings are set, open Slide Show > Set Up Slide Show and choose Using timings, if present in the Advance slides section. The continuous-loop checkbox must still be selected to repeat the sequence.
You can also use Slide Show > Rehearse Timings to record how long you spend on each slide during a practice run. PowerPoint saves those timings, which can be used for automatic advancement. Review them before using the show unattended: a pause while rehearsing may produce a much longer slide duration than intended. Rehearsed timings are not required for looping; they are useful when you want the slides to advance without clicks.
Choose a show mode that fits the display
The Set Up Show dialog also lets you choose how the presentation appears and how viewers interact with it. For an ordinary presentation on a projector, Presented by a speaker (full screen) is typically appropriate. The continuous-loop option can be used with this mode; it does not require a kiosk setup.
For an unattended touchscreen or information display, Browsed at a kiosk (full screen) may be a better fit. Kiosk mode is designed for hands-off viewing and restricts the usual ways of navigating the show, so viewers cannot freely click through slides as they might in a speaker-led presentation. Add timings so it advances on its own, and test how viewers can exit or interact before putting the display into service. The loop option still determines whether the show returns to the beginning after the last slide.
Browsed by an individual (window) runs the show in a window rather than taking over the full screen. That can suit a presentation viewed on a computer alongside other work, but it may be less suitable for a public display. Select the mode based on the viewing situation, not simply because the word kiosk sounds like the only way to loop.
Check animations, audio, and video separately
A loop repeats slides, but it does not guarantee that every object on each slide will play as intended. An animation may be set to start on click, for instance, so a slide that advances automatically can move on before a viewer triggers the animation. Review the animation start settings and the slide timing together. A slide that contains several builds may need a longer duration than a static slide.
Videos and audio clips also have their own playback behavior. Check whether a video starts automatically or on click, whether it finishes before the slide advances, and whether its own playback options are set to repeat if that is desired. A looping slideshow does not necessarily restart a video at the moment the slide reappears in every configuration. Test the complete sequence, including the transition from the last slide back to the first, rather than assuming the loop checkbox controls media playback.
For a presentation with narration or music, confirm that the sound is audible at the display location and that it does not stop unexpectedly at a slide change. If playback depends on an external file rather than media embedded in the presentation, keep that file available and verify the presentation on the computer that will run it.
Start, stop, and prepare the presentation
After setup, save the file and run the slideshow from the beginning to verify the loop. On Windows, F5 starts a slide show from the beginning, while Shift+F5 starts from the current slide. On a Mac, use the commands on the Slide Show tab if those Windows shortcuts do not match your keyboard or function-key settings. Press Esc to stop the show and return to PowerPoint.
If the file should open directly in slide-show mode when someone launches it, save a separate copy as a PowerPoint Show file (.ppsx) using the Save As file type options. That changes how the file opens in PowerPoint; it does not make the computer launch it on its own or guarantee that it will remain running. Keep an editable .pptx copy as well if you expect to revise the slides. Before displaying it, test the .ppsx on the actual computer and confirm that fonts, media, timing, and screen arrangement work there.
Common loop problems and fixes
- The show stops after the last slide: Reopen Slide Show > Set Up Slide Show and confirm that Loop continuously until ‘Esc’ is selected. Save the presentation after changing the setting.
- The first slide does not advance: The loop option does not supply a duration. Set an After time in Transitions, and choose Using timings, if present in the show setup dialog. Check for a slide that has no timing.
- The slides advance too quickly or slowly: Review the After value on each slide, or rehearse the timings again. A single unusually short or long slide can make the entire loop appear broken.
- A click changes slides unexpectedly: Clear On Mouse Click under Transitions for the relevant slides, or use a suitable kiosk setup for a hands-off display. Test interaction before relying on kiosk mode.
- Media does not restart or finish: Inspect the media’s playback settings as well as the slide timing. The slide may be advancing before a clip finishes, or the clip may have a separate repeat setting.
- The display exits the show: Esc is the intended way to end a loop. Check whether someone is pressing it or whether another application, device, or system setting is interrupting the presentation.
Testing matters most when the show will run unattended. Let it play through the final slide and into the next cycle, then observe a full pass for timing, transitions, sound, and media. If it must run for hours, test it for a representative period on the same computer and display; a successful short preview cannot establish that every device or power setting will behave the same way.
Plan for a reliable unattended display
PowerPoint controls the presentation, but the computer and display also affect whether it keeps running. Check that the computer will not go to sleep, lock the session, or turn off the display during the planned run. Those settings are outside the slide-show loop itself and can vary by Windows or macOS configuration. For a public or business display, follow the organization’s device and security policies rather than leaving an account exposed just to keep a show visible.
Keep a copy of the presentation somewhere accessible and make sure the computer has the correct version of the file. If the display uses a second monitor, confirm that the slide show appears on the intended screen and that Presenter View is not showing instead. A short on-site test catches practical issues such as unreadable text at a distance, muted speakers, or a screen that is set to the wrong input.
Frequently Asked Questions
Can PowerPoint loop a slideshow automatically?
Yes. Select Slide Show > Set Up Slide Show, check Loop continuously until ‘Esc’, and select OK. For slides to advance without clicks, also set slide timings and choose Using timings, if present.
Will a PowerPoint slideshow loop without timings?
It can repeat after the final slide, but it may wait for a click on each slide if no automatic timings are set. Add an After duration under Transitions for hands-free playback.
How do I stop a PowerPoint slideshow from looping?
During playback, press Esc to exit the show. To turn looping off for future playback, clear Loop continuously until ‘Esc’ in Slide Show > Set Up Slide Show and save the presentation.
Does kiosk mode have to be on for a continuous loop?
No. The loop checkbox works with other show types too. Kiosk mode is an option for unattended, full-screen viewing with restricted navigation; it is not a requirement for repeating the slides.
Can I make PowerPoint open directly into the slideshow?
Save a copy as a PowerPoint Show file (.ppsx) so it opens in slide-show mode when launched in PowerPoint. That does not automatically start the file when the computer turns on; opening it at startup requires a separate computer-level setup.
Related
- How to Record a PowerPoint Presentation as a Video
- How to Record a PowerPoint Presentation in Zoom
- Parts Inventory Spreadsheet: What to Track and How
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Calculate Percentage in Google Sheets: Formulas & TipsTo calculate a percentage in Google Sheets, divide the part by the total, then format the result as…
- How to Delete Grouping in Excel: Rows, Columns & SheetsTo delete a row or column grouping in Excel, select the grouped rows or columns, then choose Data…
- Attendance Tracker Spreadsheet: How to Build and Use OneAn attendance tracker spreadsheet is a dated record of who attended, missed, or arrived late, usually organized with…
- Adjust Page Breaks in Excel: Steps and TipsTo adjust a page break in Excel for Microsoft 365 on Windows, go to View > Page Break…
- How to Make a Flowchart in Word: Step-by-Step GuideTo make a flowchart in Microsoft Word, choose Insert > Shapes, add shapes from the Flowchart section, label…
- Schedule Send an Email in Old Outlook with Delay DeliveryIn classic Outlook for Windows, open a new message, choose Options > Delay Delivery, set Do not deliver…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.