Yes. In the Microsoft PowerPoint desktop app, open Slide Show > Set Up Slide Show and select Loop continuously until ‘Esc’; then start the show and it will repeat from the beginning after the last slide. To make it advance without clicks, also set slide timings and choose Using timings, if present.
What a continuous loop does
A continuous loop makes a presentation cycle through its slides repeatedly rather than stopping at the end. When the final slide finishes, PowerPoint returns to the first slide and continues. The loop can be useful for a reception display, information screen, trade-show booth, classroom waiting screen, or a photo presentation.
The loop setting controls what happens at the end of the show; it does not, by itself, determine how quickly slides advance. If the presentation is set to advance manually, it can still loop, but someone must click to move through the slides. For a hands-off display, configure both the loop and the slide-advance method.
“Until Esc” is important: a loop does not ordinarily run forever if someone exits the slideshow or closes PowerPoint. Pressing Esc ends the presentation. The setting also does not mean a slide’s video or audio will necessarily repeat; media playback has its own options.
Turn on the loop in PowerPoint for Windows
In PowerPoint for Microsoft 365 on Windows, configure the presentation as follows:
- Open the presentation in the desktop PowerPoint app.
- Select Slide Show on the ribbon, then select Set Up Slide Show.
- In the Set Up Show dialog box, check Loop continuously until ‘Esc’.
- Under Advance slides, select Using timings, if present if the slides should advance automatically. Choose Manually if an operator should control each change.
- Select OK, then start the show with Slide Show > From Beginning or press F5.
To check the presentation from the slide currently selected in the editing window, use Slide Show > From Current Slide or Shift+F5. During a show, Esc exits back to PowerPoint. The loop setting is saved with the presentation, so save the file after changing it and reopen it on the computer that will run the display to confirm the setup.
Set the loop on a Mac
PowerPoint for Mac has the same core show option, though the ribbon and dialog layout can vary slightly by release. Open the presentation in the desktop app, choose Slide Show > Set Up Show, and select Loop continuously until ‘Esc’. Set the advance option to use timings if automatic progression is required, then confirm the dialog. Start the presentation from the Slide Show menu; keyboard shortcuts differ from Windows, so using the menu is a reliable way to find the start command.
Some settings and playback controls are not identical across Windows, Mac, and PowerPoint for the web. If you cannot find Set Up Show or the loop option in a browser, open the file in the desktop app and configure it there. A browser-based presentation may be able to display slides, but it does not provide every desktop slideshow setup feature in every environment.
Make slides advance automatically
Slide timings determine how long each slide remains on screen before PowerPoint advances. To set them in the Windows desktop app, select a slide, open Transitions, and find the Timing group. Under Advance Slide, select After and enter a duration, such as 00:10.00 for ten seconds. Clear On Mouse Click if you want that slide to advance only by timing. Select Apply To All to apply the same duration to every slide, or set individual durations when some slides need more reading time.
For example, a simple five-slide announcement with a ten-second duration on each slide takes about 50 seconds to complete one pass, excluding transition effects and any delays caused by media. When looping is enabled, PowerPoint starts the next pass after the last slide’s timing elapses. A slide with no automatic timing may wait for a click, depending on the show’s advance setting.
PowerPoint also provides Rehearse Timings and recording tools for capturing how long you spend on each slide while presenting. These can be useful for a talk, but timings recorded during a rehearsal may not suit an unattended screen: a slide shown briefly while practicing could be too quick for a viewer to read. Review the saved durations in Slide Sorter or on the Transitions tab before relying on them.
On Mac, look for the After and On Mouse Click controls on the Transitions tab; their placement may differ from Windows. If the show does not advance automatically, check both the per-slide After settings and Set Up Show’s Advance slides choice. Having timings in the file is not enough if the show is configured to advance manually.
Choose a normal show or kiosk mode
Set Up Show offers different presentation types. Presented by a speaker (full screen) is appropriate when someone will control the show, while Browsed by an individual (window) runs in a resizable window. Browsed at a kiosk (full screen) is designed for unattended displays and restricts ordinary keyboard and mouse navigation; viewers generally need links or action buttons provided in the presentation to move around.
For a straightforward looping display, a full-screen show with Loop continuously until ‘Esc’ and automatic timings is often easier to operate than kiosk mode. Use kiosk mode when you specifically want to prevent casual navigation and have designed any required on-screen interaction. It is not a substitute for setting slide durations: unattended slides still need timings if they are expected to advance on their own.
Consider the physical setup, too. A kiosk computer may have sleep, screen-saver, notification, or power-saving settings that interrupt playback. Those are operating-system settings rather than PowerPoint loop controls. Arrange the display and computer so the presentation can stay visible, while following the organization’s policies for unattended equipment and account security.
Handle audio, video, and transitions
Looping the slideshow does not automatically make every media item loop in the way you might expect. For background audio, select the audio object and use the Playback tab options available in the desktop app, such as Play Across Slides, Start Automatically, and Loop until Stopped where supported. Check that the audio starts again as the presentation returns to slide one. Audio that is set to stop after its own duration may leave later passes silent.
For a video, select it and inspect the Playback options for Start and Loop until Stopped. A video set to play only once may stop when it reaches the end even though the slide show continues. Test the video on the target computer: media codecs, linked-file locations, and playback behavior can differ between devices. If a video is linked rather than embedded, keep the linked file available at the expected path or package the presentation and media appropriately.
Transitions can change the feel and total length of a loop. A transition’s duration is separate from the time a slide waits before advancing. Very long transitions, complex animations, or large media files can make a repeating display feel slow or uneven. A simple transition and a consistent timing pattern are generally easier for viewers to follow, especially when the content is intended to be read from a distance.
Save and test the presentation on its display computer
Before putting a presentation on a public or unattended screen, save it and test a complete cycle on the device and display that will be used. Start at the first slide, observe the timing through the final slide, and confirm that the show returns to slide one. A quick test of only the opening slides can miss an untimed slide or a media item that stops near the end.
- Check text size, contrast, and slide timing from the expected viewing distance.
- Confirm that audio is routed to the intended speakers—or muted if sound is not appropriate.
- Verify that videos and linked media work without relying on files stored only on another computer.
- Check that the computer will not sleep, lock, or show notifications during the display.
- Keep an editable copy of the presentation and a backup playback copy where appropriate.
If the presentation will run for a long period, watch more than one full cycle. A loop can technically work while still being unsuitable—for example, a title slide may flash by too quickly, a transition may feel abrupt at the restart, or the content may become difficult to read because slides advance too fast.
Common loop problems and fixes
The show stops at the last slide. Reopen Slide Show > Set Up Slide Show and verify that Loop continuously until ‘Esc’ is checked. Confirm you changed the presentation being played, not a separate copy, then save it.
The slides do not move on their own. Check that the slides have After timings and that Set Up Show is set to Using timings, if present. If the show is set to Manually, it waits for an operator even when timings exist.
It advances too quickly or slowly. Review the After duration on each slide. Apply To All changes every slide to the same value, so use it only if a uniform pace is intended. Slides with dense text or charts may need longer than a title or image slide.
The loop works on one computer but not another. Confirm that the second computer is opening the latest saved file in desktop PowerPoint. Check for missing linked media, unsupported playback components, and differences in display or power settings. If a setting is unavailable in the web app, configure and save it using the desktop app.
The presentation seems stuck. A slide may be set to manual advance, or a video or animation may still be playing. Test the slide timings and media separately. Press Esc to exit, then inspect the relevant slide rather than assuming the loop checkbox is broken.
Frequently Asked Questions
Does PowerPoint loop automatically after I check the box?
It repeats after the last slide, but automatic slide changes also require timings and the Using timings, if present option. Without those, the show may wait for clicks.
Can I make a PowerPoint loop without pressing a key?
Yes. Set slide timings, choose Using timings, if present, and enable Loop continuously until ‘Esc’. Start the show and leave it running. You will still need to prevent the computer from sleeping or interrupting playback.
How do I stop a looping slideshow?
Press Esc while the slideshow is active. This ends the show and returns to the editing window; it does not remove the saved loop setting.
Can one slide stay on screen longer than the others?
Yes. Set a different After duration for that slide on the Transitions tab. You do not have to use Apply To All, and doing so would replace the individual durations with one shared value.
Will a PowerPoint video or song repeat when the slideshow loops?
Not necessarily. Configure the media’s own playback options, such as Loop until Stopped when available, and test a full cycle. The slideshow loop and media loop are separate behaviors.
Related
- How to Make a Research Poster in PowerPoint
- How to Make a Project Timeline in PowerPoint That Works
- How to Make a Process Flowchart in PowerPoint
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Link a PivotChart to a Different PivotTable in ExcelYou generally cannot retarget an existing Excel PivotChart directly to a different PivotTable. To make a chart use…
- Excel Find and Replace Carriage Returns: Steps and FixesIn Excel for Microsoft 365 on Windows, press Ctrl+H, click the Find what box, and press Ctrl+J to…
- Excel Tables Within Tables: What You Can Do InsteadNo. In Excel for Microsoft 365, you cannot place one structured Excel Table inside another: table objects cannot…
- Adjust Page Breaks in Excel: Steps and TipsTo adjust a page break in Excel for Microsoft 365 on Windows, go to View > Page Break…
- How to Create a Word Template with Fillable FieldsTo create a Word template with fillable fields, build a document in Word for Microsoft 365, add content…
- Naming a Cell Range in Google Sheets: Steps, Uses, and TipsTo name a cell range in Google Sheets, select the cells, choose Data > Named ranges, enter a…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.