Onshape Split Tool: How to Split Parts and Faces

How-to basics · Updated November 22, 2026

To use the Split tool in Onshape, open a Part Studio, click Split on the feature toolbar, choose whether to split a part or a face, select the target and a tool that intersects it, then confirm the feature. Split creates separate part regions or divides a face without moving the resulting geometry, so it is useful for preparing parts for separate edits, appearances, or exports.

Before you start, decide what you need to divide and where the dividing boundary should go. For a straight cut through a part, a plane is often the simplest tool. A surface or an existing face can work for a shaped boundary. The cutting tool must intersect the selected geometry; merely touching it or sitting nearby will not create the intended split.

What You’ll Need

  • An Onshape document with a Part Studio containing the part or face you want to split.
  • A suitable splitting tool, such as a plane, an existing face, or a surface that crosses the target. Create the tool first if it does not already exist.
  • A clear idea of which side or region you want to keep. Splitting divides geometry in place; it does not automatically reposition the resulting parts.

Step-by-Step

  1. Open the correct Part Studio. In your Onshape document, select the Part Studio tab containing the geometry. The Split feature works on Part Studio geometry, not as an assembly command for separating assembled components. If you are currently in an Assembly, return to the Part Studio that owns the part and make the change there.
  2. Check that the target is ready. Look at the parts list and confirm that the intended part exists and is not hidden. If the target is a face, make sure you can identify it clearly in the graphics area. If the geometry is still being created by earlier features, resolve any red or failed features first; a downstream split cannot reliably operate on invalid geometry.
  3. Create or identify a splitting tool. For a simple straight division, use an existing plane such as Front, Top, or Right, or create a plane at the required offset. Use a plane whose position crosses the target. If the boundary needs to follow existing geometry, consider a suitable face or surface instead. A surface can be useful when a flat plane cannot produce the desired boundary, but it still needs to pass through the part rather than stop short.
  4. Start the Split feature. Click Split in the Part Studio feature toolbar. The feature dialog opens and prompts you to specify what to split and what to split it with. Depending on the current selection and dialog layout, you may need to choose the split type or click the appropriate selection field before picking geometry.
  5. Choose whether to split a part or a face. Select the part option when you want to divide a solid part into separate part regions. Select the face option when you want to divide one surface into smaller faces while leaving the underlying solid as a single part. This distinction matters: a face split changes face boundaries, while a part split creates separate solid regions in the Part Studio.
  6. Select the target geometry. Click the part or face to be divided. If you have several nearby parts, use the parts list or hover carefully to confirm the highlighted selection before clicking. Check the selection field in the dialog so you know that the correct target was captured. You can remove a mistaken selection from that field and select again.
  7. Select the splitting entity. Click the field for the splitting tool and select the plane, face, or surface that should define the division. For a face split, the available tools and selection choices can depend on the geometry and the feature context; select a tool the dialog accepts and that actually crosses the face. If using a sketch-based boundary is supported by the selection field in your current context, select the appropriate sketch region rather than an unrelated sketch edge.
  8. Inspect the preview before accepting. Onshape displays a preview of the result when the selections are valid. Rotate the model and check the boundary from more than one angle. For a part split, make sure the preview shows the intended separate regions, not a small sliver or an unexpected extra fragment. For a face split, confirm that the dividing line appears on the intended face and does not divide a neighboring face instead.
  9. Adjust selections if the result is wrong. If the preview is missing, check whether the tool intersects the target. If the cut is on the wrong side or at the wrong position, edit the plane offset or choose a different splitting entity. If several parts are selected unintentionally, clear the target field and select only the intended part or parts.
  10. Confirm the feature. Click the green check mark in the feature dialog to create the Split feature. The new feature appears in the Part Studio feature list. If the preview is not what you want, cancel rather than accepting an uncertain result, then correct the setup and try again.
  11. Verify the result in the Part Studio. For a part split, inspect the parts list to confirm the resulting pieces are separate parts. Hide one region temporarily if that helps verify the division, then show it again. For a face split, inspect the face boundary and confirm the solid has not become separate parts. Rename or recolor pieces if that will make later work easier; these are follow-up organization steps, not part of the split itself.
  12. Continue with downstream work. You can use the separate parts for additional features, apply appearances, or select individual parts for export. If you plan to export one region, select the intended part rather than exporting the whole Part Studio. Keep the Split feature in the history so you can edit its selections or its supporting plane later.

Common Mistakes

Confusing a face split with a part split. A face split creates additional face boundaries on a solid; it does not produce separate solid parts. Choose the part option when the goal is independent solid regions, such as two pieces you want to select or export separately.

Using a tool that does not cross the target. A plane positioned just outside the model, or a surface that ends before reaching the solid, cannot create the intended division. Check the tool’s position and extent in the preview. Move the plane or extend or replace the surface as needed.

Selecting the wrong item in a crowded model. Edges, faces, parts, and construction geometry can overlap visually. Confirm the highlighted item and the dialog’s selection field instead of assuming the click selected what you intended. Hide unrelated parts temporarily if they obstruct selection.

Expecting the pieces to move apart. Split divides geometry but does not create a gap or reposition the new regions. If you need an exploded arrangement, do that as a separate operation in an Assembly or another appropriate workflow after creating the separate parts.

Accepting a tiny unwanted region. A tool that grazes the part can produce a narrow sliver or several regions rather than two useful pieces. Zoom in on the intersection and adjust the tool so it crosses the target cleanly. Think about the geometry on both sides of the boundary before confirming.

Deleting or changing a supporting tool without checking dependencies. A split may rely on a plane, face, or surface created earlier in the feature history. If you edit or remove that source, the Split feature can fail. Use the feature list to locate the source and repair the dependency rather than rebuilding the split blindly.

Tips

  • Use a datum plane for predictable straight divisions. A named plane or an offset plane is easier to locate and adjust than an arbitrary temporary selection. Give important planes clear names in the feature list.
  • Choose the split type based on the next task. If each side needs its own appearance, downstream feature, or export selection, split the part. If you only need separate selectable surface regions for a later operation, splitting the face may be enough.
  • Keep the preview visible while changing the tool. A slight change to a plane position can alter the size of both regions or create an unwanted fragment. Inspect the preview from the front and from an oblique angle.
  • Use the feature history to make revisions. Double-click the Split feature or use its context menu to edit it. If the intended boundary has changed, adjust its source plane or surface and then review downstream features for errors.
  • Give resulting parts useful names. Names such as left half, mounting section, or cover make selection easier when the Part Studio contains many pieces. Naming does not change the geometry, but it helps prevent later selection mistakes.
  • Separate geometry only as much as the design requires. Splitting a solid can affect how later features reference faces and edges. Keep the model simpler when a face division, an appearance, or another less structural change will meet the goal.

Troubleshooting

The Split feature will not accept my selection. Confirm that the correct selection field is active before clicking in the graphics area. Check whether the dialog is asking for a part, a face, or a splitting entity. If the field expects a part and you click a face, clear the selection and choose the appropriate target type first. The selection filters and available options depend on the chosen split mode.

The preview does not appear. Start by checking that the splitting tool intersects the selected target. A plane may need a different offset; a surface may need to be extended or replaced. Also verify that the target is valid and visible. If the feature depends on geometry created by an earlier failed feature, repair that earlier feature and then return to Split.

The split creates too many pieces. The tool may cross the target in multiple places or intersect more than one selected part. Edit the feature and inspect the intersections carefully. Select only the intended target, or use a simpler tool that crosses it once. If a curved surface passes through the solid more than once, a plane or a different surface may give a cleaner result.

The split runs in an unexpected direction or location. The Split tool follows the selected geometry; it does not infer a preferred direction from your view. Edit the plane or select a different face or surface, then check the boundary in the preview. Rotate the camera to distinguish an actual geometry problem from a boundary that only looks misplaced in the current view.

The feature fails after I edit another feature. A source face or surface may have changed or disappeared, leaving the Split feature without its original reference. Edit the Split feature and reselect a valid tool. If the feature history has several downstream dependencies, work forward from the earliest failed feature and confirm each repair before moving on.

I cannot find the new piece in the parts list. Check whether you chose the face option rather than the part option; a face split keeps the solid as one part. For a part split, look for additional entries in the Part Studio parts list and check whether any are hidden. If the list still shows only the original part, edit the feature and verify that its preview actually divides the solid.

Frequently Asked Questions

Does Split move the pieces apart?
No. It divides the geometry at the selected boundary but leaves the resulting regions in their original positions. Use a separate assembly or positioning workflow if you want a gap or an exploded view.

What is the difference between splitting a part and splitting a face?
Splitting a part creates separate solid part regions in the Part Studio. Splitting a face divides a surface into additional faces while keeping the solid part intact.

Can I split a part with a plane?
Yes. A plane is a practical choice for a straight division, provided it passes through the part. Create or position an offset plane first if the standard origin planes are not in the right location.

Can I split a part using a curved boundary?
A suitable surface or existing face can define a non-flat boundary if it intersects the solid in the required way. Inspect the preview closely, because a curved tool may cross the part more than once and create extra regions.

Can I undo a Split feature?
You can undo the feature with the normal Onshape undo control or remove it from the feature history. Editing or deleting a feature can affect later features that depend on its geometry, so check the feature list afterward.

Can I export just one side after splitting?
Yes. After a successful part split, select the desired part in the Part Studio and use the export workflow for that part. Confirm the selection before exporting so you do not unintentionally export the entire Part Studio.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.