How to Split an Object in SOLIDWORKS: Step-by-Step

How-to basics · Updated November 22, 2026

To split a solid object in SOLIDWORKS, use a plane or surface that crosses it, then choose Insert > Features > Split. The Split feature divides one solid body into separate bodies in the part; you can keep those bodies together or save them as separate part files. Before starting, save your part and decide where the cut should pass through the model.

What You’ll Need

  • A SOLIDWORKS part document containing a solid body. This workflow is for splitting geometry in a part, not cutting an assembly into separate components.
  • A suitable trimming tool, usually a reference plane or a surface body that intersects the solid where you want the cut. A standard plane is the simplest tool for a straight, flat division.
  • A writable folder and meaningful file names if you plan to save the resulting bodies as separate part files.

Step-by-Step

  1. Open and save the part. Open the part containing the object, then save it before changing the model. Check the FeatureManager design tree and confirm that the solid you intend to cut is present. If the part already contains multiple solid bodies, identify which body or bodies you want the operation to divide. You can select a body in the graphics area or expand the Solid Bodies folder to inspect the list. Saving first gives you a recovery point if the cut removes or divides the wrong geometry.
  2. Choose the location and direction of the cut. Decide where the dividing boundary needs to pass. For a straight cut, select an existing plane such as Front, Top, or Right, or create a reference plane at the required offset using Features > Reference Geometry > Plane. Select the plane and check its position in the graphics area. If you need a curved or angled dividing boundary that a plane cannot provide, create a surface body that crosses the solid. The trimming tool must intersect the body; a plane positioned outside the solid will not create separate pieces.
  3. Start the Split feature. With the part active, choose Insert > Features > Split. You can also locate Split through SOLIDWORKS Command Search if the menu layout differs in your release. The Split PropertyManager opens. In the Trim Tools selection box, select the plane or surface you prepared. Make sure the tool is listed in the box, rather than only highlighted in the graphics area. If the selection is difficult, rotate the model or select the tool from the FeatureManager tree.
  4. Calculate the cut. Click Cut Part in the PropertyManager. SOLIDWORKS calculates the intersections and previews the resulting bodies. Inspect the model from more than one direction. A valid cut should visibly separate the solid into the intended regions; simply seeing the plane pass through the object is not enough. If the preview is not what you expected, do not accept it yet. Check the selected trim tool and its position, then adjust the plane or surface and calculate the cut again.
  5. Review the resulting bodies and finish the feature. Examine the bodies listed in the PropertyManager and the preview in the graphics area. Confirm that every piece you need is present and that the cut has not produced small sliver bodies or left the wrong side intact. If the result is correct, click the green check mark to accept the feature. The part remains one document, but the former single solid is now represented by separate solid bodies. Expand the Solid Bodies folder to verify the result. You can rename bodies there to make later selection easier.
  6. Save separate part files if required. If you only need separate bodies inside the current part, save the part normally and stop here. To make each body its own part file, use Insert > Features > Save Bodies or click the Save Bodies option offered in the Split workflow. Select the bodies to save, set a destination folder and give each output a clear file name. Review the file paths before confirming. If the dialog offers an option to create an assembly from the saved bodies and you need an assembly containing those pieces, enable it; otherwise leave it off. Save the original multibody part as well, so you retain the feature history and source geometry.

Common Mistakes

  • The cutting tool does not cross the solid. A plane that only touches the outside of a body, or sits just beyond it, may not divide it. Move or offset the plane until it passes through the full region that needs cutting. For a surface tool, confirm that the surface actually intersects the solid and extends far enough across the intended cut.
  • Using Split when you only want a line on a face. Split creates separate solid bodies; it is not the same as dividing or marking a face. If your goal is to create visible face boundaries without separating the solid, investigate the Split Line feature instead. Split Line divides faces for purposes such as appearance, selection, or a later feature, but it does not create independent solid bodies.
  • Accepting the feature without checking every piece. A cut can produce more bodies than expected, especially when the trimming tool crosses a complex or hollow model. Review the preview and the Solid Bodies folder. Remove or correct unwanted geometry by editing the feature or its trimming tool, rather than assuming the preview contains only two pieces.
  • Expecting the bodies to be separate files automatically. The Split feature creates multiple bodies within the part document. It does not necessarily create a collection of independent part files. Use Save Bodies when separate files are needed, and keep the original part if you want a convenient editable source model.
  • Using a tool that creates a tangent contact instead of a true division. A plane or surface that only touches the model along an edge or point may fail to produce the intended two regions. Shift the tool slightly so it crosses a meaningful area of the solid, then recalculate.

Tips

  • Use a reference plane for predictable straight cuts. A plane is easy to reposition and dimension. When the cut must sit a precise distance from a face, create an offset plane and enter the distance instead of dragging it approximately.
  • Rename important bodies. Names such as Upper Housing and Lower Housing make Save Bodies selection and later feature work clearer than default names such as Body1 and Body2. Rename them after confirming the split so you do not confuse the preview with the finished result.
  • Keep the feature history understandable. Place the Split feature after the geometry it depends on, and give it a descriptive feature name in the FeatureManager tree. If you later change the part, a clear name helps you find the cut and edit its trimming tool.
  • Save separate files only when the downstream workflow needs them. A multibody part is often simpler when the pieces are designed together. Separate files are useful when bodies need independent drawings, materials, machining workflows, or assembly placement. Save Bodies can also generate an assembly when that is appropriate.
  • Check references after moving or renaming files. Part files created by Save Bodies may be referenced by an assembly or by the source part. Keep related files together, and use SOLIDWORKS file-management tools when relocating a set of linked documents so references do not break.

Troubleshooting

Split is unavailable or the command fails. Confirm that you are editing a part document and have a valid solid body. A surface-only model may need to be thickened or otherwise converted into a solid if your goal is to divide a solid object. If the command is not visible in the menus, search for Split using Command Search; the available location can vary with interface customization and SOLIDWORKS release.

Cut Part does not create any bodies. First verify that the plane or surface appears in the Trim Tools box. Then inspect the intersection: the tool must pass through the solid, not merely sit nearby or touch it tangentially. For an offset plane, edit its distance. For a surface, edit the sketch or feature that created it so the surface extends through the full area. Reopen or recalculate the Split preview after changing the tool.

The cut creates too many pieces. Look for extra intersections between the trimming tool and the model, such as a surface passing through several arms or disconnected regions. Adjust the tool so it intersects only the intended area, or use a more controlled surface. If the extra bodies are expected, decide whether to keep them or revise the design before saving separate files.

The saved part files are missing or have confusing names. Reopen Save Bodies and check which bodies are selected, the destination folder, and each file name. Ensure you have write permission for that folder and that the files are not being saved to an unexpected location. If the files exist but do not appear in an assembly, use the saved file paths to locate and insert them.

A later edit breaks the split. The trimming tool may have moved, been deleted, or stopped intersecting the updated solid. Edit the Split feature, reselect an appropriate tool if necessary, and check the preview before accepting. A plane tied to stable reference geometry is often more robust than one positioned relative to a face that may change during edits.

Frequently Asked Questions

Does Split make two separate SOLIDWORKS files?
No. Split divides a solid into bodies in the current part document. Use Save Bodies to write selected bodies as individual part files. You can also create an assembly from those saved parts when the workflow calls for one.

What is the difference between Split and Split Line?
Split divides solid geometry into separate bodies. Split Line creates boundaries on faces, but does not turn one solid into separate solid bodies. Choose the feature based on whether you need independent pieces or just divided face regions.

Can I split a part with a curved cut?
Yes, if you use a suitable surface body as the trimming tool and it intersects the solid. Create and inspect the surface first, then select it under Trim Tools and preview the resulting bodies. A basic plane produces a flat cut; it cannot create a curved boundary by itself.

Can I split a part into more than two bodies?
Yes. A trimming tool can create more than two resulting regions when it intersects the model in multiple places. Check the preview and resulting-body list carefully, since complex shapes can produce extra pieces you did not intend.

Can I undo a Split feature?
Yes. Use Undo immediately after creating it, or delete or edit the Split feature in the FeatureManager tree. If you have already saved separate part files, undoing the feature in the source part does not automatically remove those files, so check the destination folder before deleting anything.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.