To make a PowerPoint slideshow repeat, open the presentation in the desktop app, go to Slide Show > Set Up Slide Show, check Loop continuously until Esc, and select OK. If you want the slides to advance without clicks, also set slide timings. The loop option controls what happens after the last slide; timings control when each slide advances.
What You’ll Need
- A PowerPoint presentation saved as a .pptx file, opened in the Microsoft 365 desktop app. The steps below use PowerPoint for Windows; Mac differences are noted where useful.
- If the show should run unattended, decide how long each slide should stay on screen. You can set a separate duration for each slide or use Rehearse Timings.
- A way to preview the presentation, such as the computer you will present from. Test it there if you can, especially if the show will run on a display or kiosk.
Step-by-Step
- Open the presentation and check its order. Open the .pptx file in PowerPoint, then look through the slide thumbnails on the left. Confirm that the first and last slides are where you want them. A loop returns from the last slide to the first, so a closing slide may appear immediately before the opening slide each time around. If that transition would feel abrupt, revise the order or add a brief final slide that leads naturally back to the start.
- Open the show settings. In Windows, select the Slide Show tab on the ribbon, then choose Set Up Slide Show. In PowerPoint for Mac, use Slide Show > Set Up Show from the menu or ribbon, depending on the version. This opens the settings for how the presentation behaves when it is played; it does not change the slide content.
- Turn on continuous looping. In the Set Up Show dialog, find Show options and check Loop continuously until Esc. Select OK to apply the setting. This setting tells PowerPoint to return to the first slide after the final slide instead of ending the show. Pressing Esc exits the slideshow. The loop setting alone does not make slides move forward by themselves: without timings, you still advance slides using a click or a navigation key.
- Choose how the presentation will be shown. For a normal presentation where you may click to advance, leave the show type as Presented by a speaker (full screen). For a display intended to run unattended, you can choose Browsed at a kiosk (full screen). Kiosk mode is designed for a self-running or touch-operated display and limits ordinary slide navigation; it is not necessary just to make a slideshow loop. In either case, keep the continuous-loop option selected if you want it to return to the beginning.
- Set slides to advance automatically, if needed. Select the first slide thumbnail, then open the Transitions tab. In the Timing area, under Advance Slide, check After and enter a time, such as 00:08 for eight seconds. For the slide to advance on its own, clear On Mouse Click. Repeat for other slides. To apply one duration across the whole deck, select a thumbnail and press Ctrl+A while the thumbnail pane is active, then set the After time. Check that all thumbnails are selected before changing the timing. On Mac, select the slides in the thumbnail pane and use the Transitions tab’s timing controls; the names and placement can vary slightly by release.
- Use recorded timings when you have them. If you have rehearsed or recorded slide timings, make sure the show is set to use them. In the Set Up Show dialog, select Using timings, if present under the slide-advance options, if that option appears. You can create timings from the Slide Show tab by choosing Rehearse Timings, then advancing through the presentation at the pace you want. At the end, accept the prompt to save the timings. The wording and exact location of timing controls can differ between PowerPoint releases, so check the Slide Show and Transitions tabs if you do not see the option in the dialog.
- Save and preview the loop. Save the file with Ctrl+S on Windows (Command+S on Mac). Start from the beginning with Slide Show > From Beginning on Windows, or use Slide Show > Play from Start on Mac if that command is shown. Let the last slide finish and confirm that the first slide appears again. Press Esc to stop. For a manual show, click through the final slide to confirm it wraps around; for an automatic show, wait through the timings without touching the mouse.
Common Mistakes
- Enabling loop but expecting automatic playback. Looping and automatic advance are separate settings. The loop option takes effect at the end of the show, while the After timing determines when a slide moves on. Add timings if the deck needs to run without someone clicking.
- Setting only the transition effect duration. The Duration control changes how long an effect such as a fade takes. It does not set how long the slide remains visible. Set the After time under Advance Slide to control the wait before the next slide.
- Leaving On Mouse Click selected unintentionally. If On Mouse Click remains enabled, the slide can advance when someone clicks, even when an After time is set. For hands-free playback, clear that option on the slides that should advance only by timing.
- Timing some slides but not others. A missing timing can leave an automatic show waiting on that slide. Review the whole deck, including title and closing slides, and check for a time on each one. A slide with a video or animation may also need a longer interval.
- Assuming kiosk mode is required for looping. It is not. Use the regular full-screen speaker show for a presentation you will control. Kiosk mode changes how viewers navigate, so choosing it unnecessarily can make the show harder to operate.
Tips
- Choose durations based on content. A simple title slide may need only a few seconds, while a slide with a chart or several lines of text needs longer. Read each slide at a comfortable pace and leave time for viewers to take in the information. Avoid giving every slide the same short interval if some contain much more detail.
- Make the loop transition feel intentional. Watch the change from the last slide to the first. A closing slide that says “Thank you” can look odd if it immediately returns to a title slide, so consider a neutral ending, a short pause, or an opening slide that also works as a recurring screen.
- Keep the presentation available on the playback computer. Copy the .pptx file to the computer that will run the show and open that copy in the desktop app. If the deck uses linked media, fonts, or other external files, check that they are available on that computer too. A successful loop does not guarantee that linked content will load.
- Plan a reliable way to stop the show. Esc exits a running slideshow. If the presentation is on a public display or kiosk, make sure the person responsible knows how to reach the keyboard or use the system’s normal exit method. Test this before leaving the presentation unattended.
- Preview the actual display arrangement. If the computer has more than one monitor, confirm that the slideshow opens on the intended screen. Use the Slide Show monitor controls when needed, then verify that the audience display shows the slides rather than Presenter View.
Troubleshooting
The slideshow stops on the last slide. Return to Slide Show > Set Up Slide Show and confirm that Loop continuously until Esc is checked. Select OK, save the presentation, and start it again from the beginning. If the option was already checked, make sure you are testing the same saved file rather than another copy.
The slides do not advance automatically. Check the affected slide’s Transitions settings. Confirm that After is checked and has a valid time, and that the slide is not waiting for a click because On Mouse Click is selected. If you are relying on rehearsed timings, select Using timings, if present in the show setup options where available. A blank or unrecorded timing can interrupt playback.
Some slides advance too quickly or too slowly. Select each problem slide in the thumbnail pane and inspect its After time. If you applied one time to all slides, adjust the slides with denser content individually. Also check whether a video, animation, or transition makes the slide feel longer than its set advance interval; adjust the timing and replay that portion.
It loops in the editor but not when opened elsewhere. Open the actual .pptx file in the desktop PowerPoint app and check the show setup there. Playback support and available controls can differ in PowerPoint for the web or other presentation programs. If the file is being shown on another computer, transfer the saved version again and test that exact copy.
Esc does not seem to stop playback. Click once on the presentation screen to give it focus, then press Esc. On a laptop, you may need to hold the Fn key while pressing Esc if the keyboard assigns special functions to its top row. In kiosk setups, check that you have access to the computer running the presentation and can use its keyboard.
Frequently Asked Questions
Will PowerPoint loop if I do not set slide timings?
Yes. The loop setting can wrap a manually controlled show back to the first slide after you advance beyond the last one. Without timings, however, PowerPoint waits for a person to advance each slide.
Can I make only some slides advance automatically?
Yes. Set an After time on the slides that should advance by themselves, and leave it off on slides where you want to pause for a speaker or audience. Test the full run so the manual slides do not interrupt an unattended presentation.
Does the loop setting remain after I save the file?
Yes, the setup is saved with the presentation. Save after changing it, then reopen the saved .pptx and check the setting if the file will be used on another computer.
How do I stop a PowerPoint slideshow that is looping?
Press Esc while the slideshow is active. That exits the show rather than merely pausing it. If the presentation is running on a kiosk or a computer you cannot reach, arrange access before starting it.
Can I set a PowerPoint slideshow to loop on a Mac?
Yes. In PowerPoint for Mac, open the show setup from the Slide Show menu or ribbon, enable the continuous-loop option, and set automatic timings from the Transitions controls if needed. Menu placement can vary by Mac version.
Will the loop work in PowerPoint for the web?
PowerPoint for the web can play presentations, but its setup and playback controls may not match the desktop app. Configure and verify the loop in the Microsoft 365 desktop version, especially for a presentation that must run unattended.
Related
- How to Add Transitions to Words in PowerPoint Slides
- Office Inventory Spreadsheet Template: Set It Up in Excel
- How to Add a Transition to a Photo in PowerPoint
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Excel Shortcut Keys: Essential Shortcuts for Everyday WorkIf you mean important Excel shortcut keys, start with Ctrl+C to copy, Ctrl+V to paste, Ctrl+Z to undo,…
- How to Add Checkboxes in an Excel File on SharePointTo add checkboxes to an Excel workbook stored on SharePoint, open the workbook in Excel, select the cell…
- Power Query Date to Text: Format Dates CorrectlyTo convert a date to text in Power Query, add a Custom Column with Date.ToText([OrderDate], "yyyy-MM-dd", "en-US"), replacing…
- How to Add an Image Box to an Excel Data Entry FormTo add an image box to an Excel data-entry form, create or open a VBA UserForm, place an…
- How to Make a Portrait Poster in PowerPointTo make a portrait poster in PowerPoint, set the slide to the poster’s vertical dimensions, build the design…
- Microsoft PowerPoint Slide Numbers: How to Add ThemTo add slide numbers in Microsoft PowerPoint for Microsoft 365 on Windows, select Insert > Slide Number, check…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.