How to Add Slide Numbers in Your PowerPoint Footer

How-to basics · Updated November 21, 2026

To add slide numbers in PowerPoint on Windows, open your presentation, choose Insert > Header & Footer, select the Slide number checkbox on the Slide tab, then choose Apply to All. PowerPoint adds a number placeholder to slides that support it; you can leave the title slide unnumbered or adjust the placeholder’s placement and appearance in Slide Master view.

Slide numbers are useful when presenting, discussing edits, or printing handouts: people can refer to a specific slide without counting through the deck. In PowerPoint, the number appears in a slide-number placeholder, usually near the bottom edge. It behaves like footer content, although it is separate from the optional text entered in the Footer box.

What You’ll Need

  • A PowerPoint presentation you can edit. These steps are for Microsoft 365 PowerPoint on Windows; the Mac route is noted below.
  • A layout that has a slide-number placeholder available. Most standard themes include one, but custom layouts may need an adjustment.
  • About a minute to turn numbering on, plus a little longer if you want to reposition or style the number.

Step-by-Step

  1. Open the presentation and check the slide layouts. Open the file in the PowerPoint desktop app. If it is important that every slide number appear in the same place, note whether the deck uses a consistent theme and layout. Slides with custom layouts may not have the same placeholder as the rest.
  2. Open the Header and Footer dialog. On the ribbon, select Insert > Header & Footer. In the dialog, make sure you are on the Slide tab. The Notes and Handouts tab controls those printed pages, not the numbers displayed on the slides.
  3. Turn on slide numbering. Check Slide number. The preview in the dialog may not show the number in the exact position or style it will have in your theme; check the actual slide after applying the setting.
  4. Decide what to do with the title slide. Check Don’t show on title slide if you want the opening slide to remain unnumbered. This hides the number on slides PowerPoint identifies as title slides. If your opening slide uses a custom layout that is not identified as a title slide, verify the result and hide or adjust its number separately if needed.
  5. Apply the setting to the deck. Choose Apply to All to put slide numbers on the presentation’s slides, subject to the title-slide option. Apply changes only the currently selected slide. If you use Apply by mistake, reopen the dialog and select Apply to All.
  6. Check the slides in Normal view. Close the dialog and inspect several slides, including the title slide, a slide using the usual layout, and any slides with unusual designs. Confirm the numbers are visible, readable, and not overlapping text, images, or the footer area.
  7. Move or format the number if needed. To change its placement or appearance consistently, select View > Slide Master, then select the master or the particular layout used by the affected slides. If the number placeholder is present, select it and move or format it. Use Slide Master > Close Master View when finished, then review the slides again.
  8. Add a missing placeholder through Slide Master. If a layout has no number placeholder, select that layout in Slide Master view and open Slide Master > Master Layout. Check Slide number, then close the dialog and close Master View. Return to Insert > Header & Footer, make sure Slide number is checked, and choose Apply to All. The exact available controls can vary with the selected layout and PowerPoint version.
  9. Save and test the presentation. Save the file, then start Slide Show from the beginning or from a middle slide to confirm the number is visible at presentation size. If you export to PDF or print, preview the output too; a number that looks fine in the editor can be clipped by a different page or screen layout.

On Mac: In PowerPoint for Microsoft 365 for Mac, use Insert > Slide Number (in some builds the command is labeled Header & Footer). Select Slide number in the dialog, optionally select Don’t show on title slide, and choose Apply to All. Slide Master is available from View > Slide Master; the ribbon labels and dialog layout can differ slightly from Windows.

Common Mistakes

  • Choosing Apply instead of Apply to All. Apply affects only the selected slide, which can make it seem as if numbering is inconsistent. Reopen the dialog and use Apply to All when you want the setting across the deck.
  • Expecting the number to appear in the Footer text box. The Slide number checkbox controls a separate placeholder. You do not need to type a number into Footer, and typing one there would repeat the same fixed text rather than update automatically.
  • Assuming the number always equals the slide’s displayed position. If the deck has hidden slides, a custom starting number, or sections, the value you see may not match a simple count of slides currently shown. Check the slide-numbering settings before treating the number as a position in the show.
  • Editing the wrong layout. A deck can use several layouts. Moving a placeholder on one layout does not necessarily change slides that use another. Identify the layout assigned to the affected slide before making a master change.
  • Using a low-contrast or tiny number. A number can technically be present but hard to read against a photo, dark background, or busy design. Check it at presentation size and choose a location and style with enough contrast.
  • Expecting a slide number to show on every slide automatically. A layout may omit the placeholder, or a slide may have inherited a custom design. Apply to All enables numbering, but it cannot make an absent or covered placeholder look correct without layout adjustments.

Tips

  • Use the master for a consistent design. Make global placement, font, size, and color changes in Slide Master view rather than adjusting each slide separately. This is especially useful when a deck uses repeated layouts.
  • Keep the number unobtrusive but readable. A small number in a clear bottom corner is often enough. Leave a margin from the slide edge so it is less likely to be cut off when printed or displayed on different equipment.
  • Be deliberate about the opening slide. Leaving its number off can make a title page cleaner. If your agenda or title slide needs a visible number, do not select Don’t show on title slide, or use a layout-specific adjustment and verify it carefully.
  • Set a starting number only when you need one. To begin at a number other than 1, go to Design > Slide Size > Custom Slide Size and change Number slides from. The slide number shown is based on that starting value and the presentation’s slide order, so inspect the result after changing it.
  • Keep numbering separate from page labels. If you need labels such as “A-1” or “Appendix,” PowerPoint’s standard slide-number placeholder may not provide the exact format. Consider adding a carefully managed text label to the relevant layouts, but remember that manually typed labels will not update automatically as slide order changes.

Troubleshooting

The checkbox is on, but no number appears. First select a slide and check whether its layout contains a slide-number placeholder. Open View > Slide Master, select the layout in use, and check Slide Master > Master Layout for the Slide number option. Enable it if needed, close Master View, then reapply numbering using Insert > Header & Footer > Apply to All. Also check that the placeholder has not been moved off the slide, covered by another object, or formatted in the same color as its background.

Numbers appear on only some slides. Different slides may use different layouts, or the change may have been applied only to the selected slide. Use Apply to All, then inspect each distinct layout in Slide Master view. If a layout has no placeholder, enable it for that layout. A background graphic or shape can also cover a number; adjust the object order or move the placeholder to an unobstructed position.

The title slide still has a number. Reopen the Slide tab in the Header and Footer dialog and select Don’t show on title slide, then choose Apply to All. If it remains visible, confirm that the slide uses a title layout PowerPoint recognizes as a title slide. For a custom opening design, select the slide and hide, remove, or adjust the number placeholder for that layout in Slide Master view without changing other layouts.

The number is in the wrong place or difficult to read. Avoid dragging it around independently on every slide. In Slide Master view, select the relevant master or layout and move or format its number placeholder. If only one slide needs a different position, make a slide-specific adjustment and check whether it is an intentional exception. Review the slide show and any exported PDF after the change.

The sequence starts at an unexpected value. Check Design > Slide Size > Custom Slide Size and review Number slides from. Also check for hidden slides and any deliberate starting-number setting. If the displayed value must match a particular printed page or section label, verify the numbering in Slide Show and PDF output rather than relying only on thumbnail order.

Frequently Asked Questions

Can I add numbers to all slides except the title slide?
Yes. In Insert > Header & Footer, check Slide number and Don’t show on title slide, then choose Apply to All. Check the opening slide afterward, particularly if it uses a custom layout.

Do slide numbers update when I rearrange slides?
Yes. The slide-number placeholder updates according to the slide’s position and the presentation’s starting-number setting. It is preferable to typing numbers manually, which can become incorrect after rearranging or adding slides.

Can I choose where the number appears?
Yes. Use View > Slide Master to move the number placeholder on the master or layout. If the presentation has multiple layouts, adjust each relevant layout and check slides using those layouts.

Can I number only a few slides?
Yes. Select the individual slide, open Insert > Header & Footer, check Slide number, and choose Apply rather than Apply to All. For a deck with many exceptions, review the layouts as well so placeholder settings do not produce unexpected results.

Will the numbers show in a PDF?
Normally, slide numbers visible on the slides are included when you export or save the presentation as a PDF. Use PowerPoint’s export or save options and inspect the resulting PDF, especially if you use custom layouts, hidden slides, or nonstandard print settings.

Is the slide number the same as the footer?
Not exactly. It usually sits in the footer area, but PowerPoint treats it as a separate slide-number placeholder. The Footer option in the Header and Footer dialog is for fixed footer text, such as a department name or copyright notice.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.