Adding a macro to a Logitech mouse lets you automate repetitive tasks—like typing a long email signature, executing a complex keyboard shortcut, or performing a multi-step action in a game—with a single button press. This guide covers the two main ways to do it: using Logitech G HUB (for gaming mice) and Logitech Options+ (for productivity mice). You’ll need the correct software installed, your mouse connected, and a basic idea of the keystrokes or actions you want to record.
What You’ll Need
- A Logitech mouse that supports macros (most gaming mice like G502, G604, G915, and productivity mice like MX Master 3S, MX Anywhere 3).
- Logitech G HUB software (for G-series gaming mice) or Logitech Options+ (for MX, M-series, and other non-gaming mice).
- A computer running Windows 10/11 or macOS (steps are similar; menus may differ slightly).
- The mouse connected via USB receiver, Bluetooth, or USB cable.
Step-by-Step
Using Logitech G HUB (Gaming Mice)
- Install and open G HUB. Download it from Logitech’s official site, install it, and launch it. Your mouse should appear in the home screen.
- Select your mouse. Click the mouse icon to open its configuration page.
- Choose a profile or create one. Profiles let you have different macros for different apps. Click the profile dropdown at the top and select a default profile or create a new one by clicking the + icon.
- Click the button you want to assign. On the mouse diagram, click the physical button you want to reprogram (e.g., a side button, the DPI shift button, or a G-key).
- Select “Macro” from the assignment list. A panel will appear with options like “Keystroke”, “Macro”, “Media”, etc. Choose Macro.
- Click “New Macro” and name it. Give it a descriptive name like “Email Signature” or “Reload & Crouch”.
- Record your macro. In the macro editor, click the Record button (red circle). Perform the keystrokes or mouse clicks you want to record. For example, type your signature or press Ctrl+Shift+Esc. Click Stop when done.
- Set the macro options. Choose how the macro plays: No Repeat (plays once), Toggle (press to start, press again to stop), or Repeat (hold to repeat, or repeat while held). For most tasks, “No Repeat” is best.
- Adjust timing if needed. You can add delays between keystrokes by clicking the small clock icon and inserting a delay in milliseconds. This is essential for actions that need the target app to respond.
- Save and test. Click Save in the macro editor, then close the panel. Press the assigned button to test. If it doesn’t work, open the macro editor and adjust the timing or repeat settings.
Using Logitech Options+ (Productivity Mice)
- Install and open Options+. Download from Logitech’s site, install, and launch. Your mouse will be listed.
- Select your mouse. Click its image to open the customization screen.
- Click a button. On the diagram, click the button you want to assign (e.g., the gesture button, a side button, or the middle click).
- Choose “Keystroke” or “Shortcut”. In the dropdown menu, select Keystroke (for typing text) or Shortcut (for key combinations).
- Record the keystrokes. A small window will appear. Click in the field and press the keys you want, or type the text. For example, to type “Best regards,” you would type that text. To create a shortcut, press the combination (e.g., Ctrl+Shift+T).
- Add delays (optional). Options+ lets you insert a delay after each keystroke. Click the “Delay” button and set a value in milliseconds. This helps when the target app is slow to process inputs.
- Save. Click Save or Apply. The button is now assigned. Test it immediately.
Common Mistakes
- Recording too fast. If you type or click too quickly, the macro may not register all actions. Slow down during recording, or add delays afterward.
- Forgetting to set repeat mode. A macro set to “Repeat” will loop endlessly, which can cause chaos. Always check the repeat setting before saving.
- Assigning the wrong button. Double-check the button you clicked on the diagram. It’s easy to click the left button instead of a side button.
- Using the wrong software. G HUB won’t work with MX mice, and Options+ won’t work with G-series gaming mice. Check your mouse model.
- Not saving the profile. If you switch profiles or close G HUB, your macro may not persist. Make sure the profile is saved and set as default.
Tips
- Use descriptive macro names. If you have many macros, names like “Sig” or “Reload” help you find them later.
- Create a dedicated profile for your most-used app. In G HUB, you can link a profile to a specific game or program so the macro only activates when that app is open.
- Add small delays (50–100 ms) between steps. This prevents the macro from overwhelming the system and makes it more reliable.
- Test in a safe app first. Open Notepad or a text editor to test a typing macro before using it in a critical application.
- Use the “Toggle” mode for long sequences. If you need to repeat a macro until you press the button again (like a farming loop in a game), Toggle mode is ideal.
- Keep macros short. Very long macros (hundreds of steps) can be buggy. Break them into smaller macros and trigger them sequentially if needed.
Troubleshooting
- Macro doesn’t do anything. First, check that the correct profile is active (G HUB shows the active profile at the top). Then, verify the button is actually assigned by clicking it in the diagram—if it shows “Macro” with your name, it’s set. If not, re-assign. Also, ensure the macro is saved and not empty.
- Macro works but skips steps. This is usually a timing issue. Open the macro editor and increase the delay between steps. Try adding 100–200 ms between each action.
- Macro repeats when it shouldn’t. Check the repeat setting. If it’s set to “Repeat” or “Toggle”, change it to “No Repeat”.
- G HUB doesn’t detect my mouse. Unplug the receiver, restart G HUB, and plug it back in. If using Bluetooth, remove and re-pair the device. Also, update G HUB to the latest version.
- Options+ says “Button not supported”. Some buttons (like the left-click) cannot be reassigned for safety reasons. Try a different button.
- Macro works in Notepad but not in my game. Many games block macros or use anti-cheat software that ignores them. Check the game’s settings for macro support, or use the game’s own keybinding system instead.
Frequently Asked Questions
- Can I add a macro to any Logitech mouse? No. Only mice that support G HUB (G-series) or Options+ (MX, M-series, and some others) allow macro assignment. Basic mice like the M185 don’t support macros.
- Will macros get me banned in games? It depends on the game. Simple macros (like one-button combos) are often tolerated, but automation that plays the game for you can trigger anti-cheat systems. Check the game’s terms of service.
- Can I record mouse clicks in a macro? Yes, in G HUB you can record left/right/middle clicks as part of the macro. In Options+, you can only assign keystrokes, not mouse clicks.
- How do I delete a macro? In G HUB, go to the macro editor, select the macro, and click the trash icon. In Options+, go to the button assignment, select the macro, and choose “Unassign” or delete it from the list.
- Can I transfer macros to another computer? Yes. In G HUB, macros are stored in your profile, which can be synced to the cloud if you have a Logitech account. In Options+, you can export settings to a file and import them elsewhere.
- Why does my macro type letters instead of performing the shortcut? This happens when you record a shortcut as literal text. For example, pressing Ctrl+C while recording might be stored as the characters “Ctrl+C” instead of the command. In G HUB, make sure you use the “Keystroke” option and press the actual keys, not type them.
Related
- PySpark partitionBy Multiple Columns: How-To
- Can Traffic Light Cameras Detect Speed? Facts
- Python in Operator for Strings: How It Works
Try it: the Column Letter to Number: aA is 27, XFD is 16,384. Converts both ways.
More in VBA & macros
- Microsoft Excel VBA For Loops: Syntax and ExamplesIn Microsoft Excel VBA, a For...Next loop repeats instructions a set number of times, while For Each...Next repeats…
- Excel VBA Dictionary Add Array: Store and Retrieve ValuesYes. In Excel VBA, add an array to a Dictionary by passing it as the item in the…
- VBA Dictionary: How to Create and Use OneA VBA Dictionary stores pairs of unique keys and associated values, letting you look up, count, or group…
- VBA Range.Item: How Cell Indexing WorksIn Excel VBA, Range.Item(rowIndex, columnIndex) returns a Range object for the cell at the specified row and column…
- Excel VBA AutoFilter Operator ExplainedIn Excel VBA, the AutoFilter Operator argument tells Excel how to apply filter criteria: use xlAnd or xlOr…
- VBA Find Function: Examples, Options, and Common FixesIn Excel VBA, use the Range.Find method to search a range for a value or text. For example,…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.