To balance a chemical equation, change the coefficients—the numbers placed in front of chemical formulas—until each element has the same number of atoms on both sides. For example, H2 + O2 → H2O becomes 2H2 + O2 → 2H2O. Never change a formula’s subscripts: that would describe a different substance, not balance the original reaction.
What balancing a chemical equation means
A chemical formula identifies the elements in a substance and the number of atoms of each element in one unit of that substance. In H2O, for example, each molecule contains two hydrogen atoms and one oxygen atom. A chemical equation uses formulas to represent reactants, which are written on the left, and products, which are written on the right.
Balancing makes the equation consistent with conservation of matter: atoms are rearranged during an ordinary chemical reaction, but the total number of atoms of each element is conserved. In an equation involving ions, total electric charge must also be conserved. The coefficients show how many molecules, formula units, or moles participate in the reaction; they do not change the identity of any substance.
The word formula is sometimes used casually when someone means equation. Strictly speaking, a single formula such as CO2 is not balanced by itself. Balancing applies to a reaction equation containing reactants and products, such as C + O2 → CO2.
How to balance an equation step by step
For most introductory problems, careful atom counting is enough. A consistent process helps prevent small errors and makes complicated reactions easier to manage.
- Write the correct formulas first. Confirm the reactants and products, then write the unbalanced equation. Do not begin by changing subscripts or guessing a new product.
- Count atoms on each side. Make a short tally for every element. If a formula has parentheses, multiply the atoms inside by the outside subscript: Ca(OH)2 contains two oxygen atoms and two hydrogen atoms.
- Choose an element to balance. Begin with an element that appears in only one formula on each side, if possible. Leave an element found in several compounds, or hydrogen and oxygen in many combustion problems, until later.
- Add coefficients in front of formulas. A coefficient multiplies every atom in the formula. For example, 3CO2 contains three carbon atoms and six oxygen atoms.
- Recount after every change. A coefficient can affect more than one element, so check the entire tally rather than only the element you meant to adjust.
- Reduce to the smallest whole-number ratio. If every coefficient has a common factor, divide them all by that factor. Then verify every element one final time.
Do not write a coefficient of 1; it is understood. A blank coefficient therefore means one molecule or formula unit, not zero.
A worked example: forming water
Start with H2 + O2 → H2O. The left side has two hydrogen atoms and two oxygen atoms. The right side has two hydrogen atoms and one oxygen atom, so oxygen is not balanced.
Place a 2 before H2O to make two oxygen atoms on the right: H2 + O2 → 2H2O. That change also makes four hydrogen atoms on the right. Place a 2 before H2 on the left. The result is 2H2 + O2 → 2H2O. Both sides now contain four hydrogen atoms and two oxygen atoms, and the coefficients are already in the smallest whole-number ratio.
More examples with different reaction types
Iron reacting with oxygen illustrates why a coefficient may need to be changed on several formulas. For Fe + O2 → Fe2O3, use 2Fe2O3 to give six oxygen atoms on the right. That requires 3O2 on the left and 4Fe on the left. The balanced equation is 4Fe + 3O2 → 2Fe2O3. Each side has four iron atoms and six oxygen atoms.
For propane combustion, balance carbon and hydrogen before oxygen. The starting equation is C3H8 + O2 → CO2 + H2O. Three carbon atoms require 3CO2; eight hydrogen atoms require 4H2O. Those products contain ten oxygen atoms altogether, so the reactant side needs 5O2. The result is C3H8 + 5O2 → 3CO2 + 4H2O.
Polyatomic ions can make a problem shorter when the same ion appears unchanged on both sides. In Na3PO4 + MgCl2 → Mg3(PO4)2 + NaCl, treat PO4 as a unit because it remains together. Two sodium phosphate units supply two phosphate groups, matching the product; three magnesium chloride units supply the three magnesium atoms. That gives 2Na3PO4 + 3MgCl2 → Mg3(PO4)2 + 6NaCl. Check sodium and chlorine as well: both sides have six of each.
Practice problems
Try balancing each equation before looking at the answer key. Count every element, including atoms inside parentheses. These examples progress from a simple synthesis reaction to combustion and a reaction with a polyatomic ion.
- N2 + H2 → NH3
- KClO3 → KCl + O2
- Mg + N2 → Mg3N2
- C2H6 + O2 → CO2 + H2O
- Na3PO4 + MgCl2 → Mg3(PO4)2 + NaCl
Answer key: N2 + 3H2 → 2NH3; 2KClO3 → 2KCl + 3O2; 3Mg + N2 → Mg3N2; 2C2H6 + 7O2 → 4CO2 + 6H2O; and 2Na3PO4 + 3MgCl2 → Mg3(PO4)2 + 6NaCl. For the ethane example, the oxygen coefficient is 7 rather than a fraction because all coefficients have been scaled to whole numbers.
Common mistakes and how to avoid them
- Changing a subscript to make the counts match. Turning H2O into H2O2 changes water into hydrogen peroxide. Keep formulas fixed and adjust only coefficients.
- Forgetting that a coefficient multiplies the whole formula. In 2Al(OH)3, there are six oxygen atoms and six hydrogen atoms, not two of each.
- Balancing one element and not checking the others. A later coefficient can undo an earlier match. Recount all elements at the end.
- Leaving unnecessary large coefficients. A balanced equation such as 4H2 + 2O2 → 4H2O has the correct atom counts, but dividing by 2 gives the simpler smallest whole-number ratio.
- Using a fraction without converting the final ratio. Fractions can help during working, but multiply every coefficient by the same number to produce whole numbers before giving the final equation.
When a systematic method helps
Some equations are difficult to balance by inspection, especially when several compounds contain the same elements. An algebraic method turns the task into a set of atom-count equations. Assign a variable to each formula’s coefficient, write an equality for each element, and solve the relationships. Because multiplying all coefficients by the same number preserves balance, choose a convenient variable value and then reduce the final ratio to the smallest whole numbers.
For example, for a general equation aA + bB → cC, each element creates its own condition. If A contributes two atoms of an element per formula and C contributes four, the atom balance includes 2a = 4c. Repeat this for every element, solve the linked conditions, and check the resulting coefficients in the original equation. This method is useful when trial-and-error becomes confusing, but it does not correct an incorrect chemical formula or an incorrect list of products.
For ionic equations, balance both atoms and net charge. In an introductory net ionic equation, H+, OH−, and H2O may be used to balance hydrogen and oxygen in acidic or basic conditions, depending on the problem’s instructions. A result with equal atom counts but unequal total charge is not balanced. Follow the method and conventions required for the course, since molecular, complete ionic, and net ionic equations represent reactions at different levels of detail.
How to check your final answer
A final check is more reliable than deciding that an equation looks symmetrical. Make a two-column atom tally for each element, multiply each formula’s subscripts by its coefficient, and compare the totals. For a reaction involving ions, add the signed charges on each side as well. Then confirm that every formula still matches the substance originally specified and that no coefficient can be reduced.
Remember that balancing describes stoichiometric proportions, not necessarily how quickly a reaction occurs, whether it proceeds completely, or the physical state of every substance. State symbols such as (s), (l), (g), and (aq) provide additional information but do not alter atom counts. An equation can be balanced and still need conditions, states, or other context to describe an experiment fully.
Frequently Asked Questions
What is the easiest way to balance chemical equations?
Write correct formulas, count atoms on each side, adjust coefficients one element at a time, and recount after each change. Balance elements that appear in fewer formulas first, then check the entire equation and reduce the coefficients if they share a common factor.
Can I change the small numbers in a chemical formula?
No. Subscripts define the chemical substance, so changing one changes the reaction’s meaning. Use coefficients in front of formulas to change how many units of each substance are represented.
Why must coefficients usually be whole numbers?
Coefficients express a relative count of particles or formula units, and a balanced equation is conventionally written using the smallest whole-number ratio. Fractions may appear temporarily during calculation, but multiplying all coefficients by a common denominator gives whole numbers.
How do I balance oxygen in a combustion reaction?
For a hydrocarbon combustion equation, balance carbon first by setting the carbon dioxide coefficient, then hydrogen by setting the water coefficient, and oxygen last. If the oxygen count leads to a fractional O2 coefficient, multiply every coefficient by the denominator to obtain whole numbers.
How can I tell whether an equation is balanced?
Count each kind of atom separately on both sides and compare the totals. For ionic equations, compare total charge too. Matching coefficients by sight is not enough; the atom and charge counts must agree.
Related
- Free Debt Payoff Calculator Excel: How to Build One
- DC Format in Excel: What It Means and How to Format Cells
- DBeaver Export to Excel: Steps, Options, and Fixes
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Excel Conditional Formatting Based on an Adjacent CellTo format a cell based on its neighbor in Excel for Microsoft 365 on Windows, select the cells…
- Excel Text Running Over Cells: Fixes and FormattingIf Excel text is running over neighboring cells, choose Home > Wrap Text to display it on multiple…
- Yes/No Dropdown in Google Sheets: Add One in MinutesTo add a Yes/No dropdown in Google Sheets, select the cell or cells, choose Insert > Dropdown, enter…
- Superscript in Excel Exports: What WorksTo display superscript in an Excel export, use an .xlsx file and apply superscript character formatting in desktop…
- How to Change Track Changes Color in Microsoft WordTo change the color used for tracked edits in Word for Microsoft 365 on Windows, open Review, open…
- Excel Column Letters: How to Find or Convert Them EasilyIn Excel, a column letter is the label at the top of a worksheet column: A is the…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.