Milwaukee M18 38 Right Angle Drill Driver: Specs & Use

Formulas & functions · Updated November 22, 2026

The Milwaukee M18 38 right angle drill driver is a cordless, compact right-angle drill that uses the M18 battery platform, designed for drilling and driving in tight, confined spaces where a standard drill cannot fit. It is not a single model but a family of tools, with the “38” referring to the 3/8-inch chuck size, and it is available in both standard and FUEL (brushless) versions.

Background: Why a Right Angle Drill?

Standard drills are long, and their chuck-to-tail length often prevents them from fitting between studs, under cabinets, or inside machinery. A right-angle drill places the chuck and bit at a 90-degree angle to the motor, allowing the tool to fit into spaces as tight as a few inches. Milwaukee has made right-angle drills for decades, and the M18 38 series is their cordless solution for electricians, plumbers, HVAC technicians, and woodworkers who need to bore holes or drive screws in awkward spots.

The “38” designation indicates the chuck capacity—3/8-inch—which is smaller than the 1/2-inch right-angle drills Milwaukee also offers. The 38 series is lighter and more maneuverable, making it ideal for lighter-duty tasks like drilling pilot holes, driving screws, or using hole saws up to about 1-1/2 inches in wood.

How It Works: Design and Key Features

The right-angle drill uses a bevel gear set to transfer power from the motor’s longitudinal axis to a perpendicular output. This gear housing is compact, typically adding only about 3-4 inches to the tool’s head. The M18 38 models feature a keyed chuck, which requires a chuck key to tighten and loosen bits—this is a deliberate choice because keyed chucks can grip more securely and are more compact than keyless chucks.

Key features across the M18 38 lineup include:

  • Motor options: The standard version uses a brushed motor, while the FUEL version uses a brushless motor for longer runtime, more power, and greater durability.
  • Variable speed trigger: Both versions offer a variable speed trigger for precise control, with a max speed around 550 RPM (standard) or 750 RPM (FUEL).
  • Built-in LED light: Most models include an LED to illuminate the work area.
  • Belt clip: A built-in belt clip is standard, making it easy to carry on a tool belt.
  • Compact head: The head height is typically around 3.5 inches, allowing it to fit into tight spaces.

The FUEL version also includes a metal gear housing and a more robust chuck, making it suitable for more demanding applications.

How to Choose: Standard vs. FUEL

Milwaukee offers two main variants of the M18 38 right-angle drill: the standard brushed model (often model 2407-20) and the FUEL brushless model (model 2907-20). Here’s how to decide:

  • Standard (2407-20): Cheaper, lighter, and perfectly adequate for occasional use or light-duty tasks. It has a max speed of 550 RPM and delivers about 300 in-lbs of torque. It’s a good choice for DIYers or professionals who need a backup tool.
  • FUEL (2907-20): More expensive, but offers 750 RPM and 350 in-lbs of torque, plus the brushless motor’s efficiency and longer lifespan. It also has a more durable metal gear case. Choose this if you use the drill daily or need maximum power in tight spots.

Also consider the chuck size: the 38 series is 3/8-inch, which accepts most standard drill bits and screwdriver bits. If you need to use larger hole saws or auger bits, consider the 1/2-inch M18 right-angle drill (like the 2706-20), but know it’s heavier and bulkier.

Common Problems and Misconceptions

One common misconception is that the M18 38 right-angle drill can replace a standard drill entirely. It cannot—it’s slower and less powerful, and the right-angle head makes it awkward for normal drilling. It’s a specialized tool for specific situations.

Another issue users report is chuck key loss. Because the chuck is keyed, the key can be easily misplaced. Milwaukee includes a small storage slot on the tool’s body for the key, but it’s not always secure. Consider attaching the key to the tool with a lanyard or buying a spare.

Some users also find the trigger position uncomfortable for extended use. The trigger is located on the rear of the tool, and you must grip the motor housing to operate it. This is standard for right-angle drills, but it can be tiring. The FUEL version’s rubber overmold helps.

Finally, be aware that the 38 series is not designed for high-torque applications like mixing drywall mud or drilling large holes in masonry. Overloading the tool can cause the motor to overheat or the gears to strip.

Comparison: M18 38 vs. Other Right-Angle Drills

When compared to other brands, the Milwaukee M18 38 stands out for its compact head size and the robustness of the M18 battery system. For example, the DeWalt 12V Max right-angle drill is smaller and lighter, but it lacks the power of the M18. The Makita 18V LXT right-angle drill is comparable in specs, but the Milwaukee’s FUEL version offers slightly higher RPM.

Within Milwaukee’s own lineup, the 38 series sits below the 1/2-inch models. The 1/2-inch FUEL right-angle drill (2706-20) has a max speed of 550 RPM and 725 in-lbs of torque, making it much more powerful, but it’s also longer and heavier. For most electrical and HVAC work, the 38 series is sufficient.

Cost and What’s Included

Prices vary, but as of recent retail listings, the bare tool for the standard M18 38 (2407-20) is around $130–$150, while the FUEL version (2907-20) is around $180–$200. Kits with batteries and chargers cost more, typically $250–$350 depending on the battery size (usually 2.0Ah or 5.0Ah).

Both versions come with the drill, a chuck key, and a belt clip. The FUEL version also includes a side handle (though it’s not always necessary). Batteries and chargers are sold separately unless you buy a kit.

If you already own M18 batteries, buying the bare tool is the most economical choice. If not, consider a kit that includes two batteries and a charger—you’ll need at least two batteries for continuous work.

Safety and Proper Use

Using a right-angle drill requires specific safety precautions due to its unusual shape:

  • Always use the chuck key: Remove the chuck key before starting the drill. A spinning key can cause serious injury.
  • Wear eye protection: Drilling in tight spaces often produces debris that can fly toward your face.
  • Beware of kickback: If a bit binds, the drill can twist violently. Keep a firm grip and use the side handle if provided.
  • Do not force the tool: Let the drill do the work. Excessive pressure can overheat the motor or break the bit.
  • Use the correct bit speed: For metal, use lower speeds and cutting fluid; for wood, higher speeds are fine.
  • Check for hidden wires: When drilling into walls, always use a stud finder or wire detector to avoid hitting electrical cables.

Also, ensure the battery is fully charged and locked into place before use. If the tool overheats, allow it to cool down before continuing.

Alternatives to Consider

If the M18 38 doesn’t fit your needs, consider these alternatives:

  • M18 1/2-inch Right Angle Drill: For more power and larger bit capacity, but heavier.
  • M12 Right Angle Drill: If you’re already on the M12 platform, this is lighter and more compact, but less powerful.
  • Flexible Shaft Attachment: For a standard drill, a flexible shaft can sometimes reach tight spots, but it’s less precise.
  • Right-Angle Attachment: A simple adapter that fits on a standard drill’s chuck, but it adds length and reduces power.

For occasional use, a right-angle attachment is a cheap alternative, but for professional work, a dedicated right-angle drill is more durable and ergonomic.

Frequently Asked Questions

Can I use the M18 38 right-angle drill for driving screws? Yes, it works for driving screws, but the slow speed (max 550-750 RPM) and lack of a clutch make it less convenient than a standard drill/driver. It’s best for drilling holes, not for driving many screws.

What is the difference between the 2407-20 and 2907-20? The 2407-20 is the standard brushed model, while the 2907-20 is the FUEL brushless model. The FUEL version has more power (350 vs 300 in-lbs), higher speed (750 vs 550 RPM), and a more durable metal gear case.

Does it come with a battery and charger? The bare tool does not. You must buy a kit or purchase batteries separately. Kits typically include two M18 batteries and a charger.

Can I use a 1/2-inch bit with a 3/8-inch chuck? No, a 3/8-inch chuck can only hold bits with a shank up to 3/8-inch. For larger bits, you need a 1/2-inch chuck model.

Is the chuck keyless? No, it uses a keyed chuck. This is intentional to keep the head compact and to provide a stronger grip on the bit.

How do I change the direction of rotation? There is a small forward/reverse switch located near the trigger, just like on a standard drill. Slide it to change direction.

Related

Try it: the Formula Explainer: paste any formula and see each function and reference in plain English.

More in Formulas & functions

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.