SOLIDWORKS Table: How to Split It on a Drawing Sheet

How-to basics · Updated November 22, 2026

To split a SOLIDWORKS drawing table, select the row or column at the intended break, right-click, choose Split, and select the direction and side offered for that table. The resulting sections can usually be moved separately, making a long table easier to fit on a drawing sheet. Save a copy first, and check that the selected table type supports splitting; available commands vary by table type and SOLIDWORKS release.

What You’ll Need

  • A SOLIDWORKS drawing with the table you want to divide. Tables are drawing annotations; splitting one does not divide the underlying model.
  • Permission to edit the drawing and, if applicable, a writable file rather than a read-only or locked document.
  • A little room on the sheet to place each resulting section. If there is not enough room, plan to move a section, adjust the sheet layout, or use another sheet.
  • A saved copy of the drawing, especially if the table has been manually edited or contains important notes, custom columns, or formatting.

Step-by-Step

  1. Open the drawing and identify the table. Open the drawing document in SOLIDWORKS and locate the table on the sheet. If the drawing has multiple sheets, activate the sheet containing the table. Check the table type, such as a bill of materials (BOM), revision table, hole table, or general table. The right-click options are not identical for every table, and some table types or versions may not provide the same split commands.
  2. Decide where the break should go. Look for a natural division in the content: for example, between groups of BOM items, below a section heading, or after a batch of rows that should remain together. A horizontal split separates the table into upper and lower sections. A vertical split, when supported, separates it into left and right sections. Consider the printed page, not just the current screen: leave enough space for dimensions, notes, the title block, and the drawing views.
  3. Save before changing the table. Use File > Save or press Ctrl+S on Windows. A split can affect the table’s layout and may require several adjustments, so saving first gives you a reliable way back. If the drawing is managed in a document system or shared location, check that you have the appropriate edit access and follow your team’s check-out process.
  4. Select the row or column at the break. Move the pointer over the row or column where you want to divide the table. Select the row or column itself rather than clicking a cell and assuming that the whole table is selected. If the selection is difficult, click a cell in the intended row or column and inspect the highlight; use the table’s row or column selection handles if they appear. The selected item provides the reference for the split, so verify it before opening the command.
  5. Open the Split command. Right-click the selected row or column and look for Split in the context menu. Depending on the table and the selection, the submenu may offer choices such as Horizontally Above, Horizontally Below, Vertically Left, or Vertically Right. Choose a horizontal option to make an upper and lower section, or a vertical option to make side-by-side sections. If the menu has no Split item, see Troubleshooting rather than trying unrelated table commands.
  6. Choose the side that places the break correctly. The words Above, Below, Left, and Right describe where the new section is placed relative to the selected row or column. Read the available choices and, if SOLIDWORKS shows a preview or confirmation, check which rows or columns will be in each section. If the result puts the selected row on the wrong side of the break, undo with Ctrl+Z and repeat using the opposite side option. Avoid repeatedly splitting until the layout is clear.
  7. Inspect the new sections and their headings. Once the command completes, check that the table contains the intended entries and that its column labels, item numbers, and notes are understandable. Some table types or settings may repeat headings in a section; do not assume every split automatically produces the heading format your drawing standard requires. If a heading is missing or duplicated, open the table’s properties or formatting controls and adjust the supported header or title settings for that table type.
  8. Position each section on the sheet. Select a section and drag it to a clear location, keeping it inside the printable sheet area and away from views, dimensions, and the title block. If the section is hard to select, click its border rather than a cell, then drag the border. Zoom in if needed. Move sections one at a time and check that the split has not caused overlaps or made text too small to read at the intended print scale.
  9. Check the drawing and save again. Review the complete table at a useful zoom level and, if practical, use print preview or create a PDF to confirm how it will appear on paper. Check row order, text wrapping, borders, alignment, and the relationship between the table and nearby drawing content. Save the final arrangement with Ctrl+S. If the table is linked to model data, rebuild or update it as appropriate and confirm that the split has not hidden or obscured entries.

Common Mistakes

  • Selecting a cell instead of the row or column. This can make the relevant split command difficult to find or can lead you to split at an unintended position. Confirm the row or column selection highlight before right-clicking.
  • Choosing a direction based only on the screen. A horizontal split may make the sections too tall for the sheet, while a vertical split can create narrow columns and wrap long descriptions. Think about the printed layout and the table’s readability before choosing a direction.
  • Assuming all table types behave the same way. A BOM, revision table, and general table can have different options, properties, and update behavior. Do not rely on a command or setting described for one type being available for another.
  • Moving a section before checking what it contains. First verify that the rows or columns are divided where intended. Otherwise, you may spend time arranging sections and then need to redo the split.
  • Forgetting linked or automatically updated data. A BOM or other model-linked table can change when the model or its configuration changes. After updating the drawing, review the split sections again; new entries or changed ordering may affect the layout.
  • Leaving a section beyond the sheet boundary. A section can look visible in the graphics area but be clipped when printed or exported. Keep the entire table inside the sheet and check the final output.

Tips

  • Split at a meaningful boundary. Keep related items together where possible, such as a group of components or a set of revision entries. This makes the sections easier to scan than an arbitrary split halfway through a logical group.
  • Choose horizontal or vertical based on the table’s shape. Horizontal splits are often useful when there are many rows and the columns already fit the sheet width. A vertical split may help when the table is especially wide and its column content can be divided without making either section confusing.
  • Leave room before you split. Move views or annotations first if that is safe and appropriate, or plan the final positions of both sections. A split creates a layout task as well as a table change.
  • Use the undo command deliberately. If the split is in the wrong place, press Ctrl+Z once and reassess the selected row or column and the direction option. On Mac, the usual undo shortcut is Command+Z; menus and shortcuts can differ by platform and release.
  • Keep text readable at the plotted scale. Avoid shrinking the table simply to make both sections fit. Reorganizing the sheet or using an additional sheet may be clearer than reducing text to an impractical size.
  • Check your drawing standard. Company templates may specify table placement, repeated headings, fonts, or sheet use. Follow those rules even if another arrangement appears to fit better on screen.

Troubleshooting

There is no Split option in the right-click menu. Confirm that you are editing a drawing, that the pointer is over a supported table, and that you selected a row or column rather than a note, cell text, or the sheet. Try right-clicking the table border or a clearly selected row. If Split still does not appear, the table type or SOLIDWORKS version may not support that operation in the current context. Check the help for your installed release or use a supported alternative, such as resizing the table, changing the sheet layout, or placing an appropriate table on another sheet. Do not recreate a linked BOM as plain text unless you are willing to lose its update behavior.

The split is in the wrong place or on the wrong side. Undo immediately with Ctrl+Z on Windows, or Command+Z on Mac, then select the intended row or column again. Choose the opposite Above/Below or Left/Right option if the available choices place the section on the undesired side. Inspect the result before moving either piece.

The new section will not move where expected. Select its outer border, not the text inside a cell, and drag from the border. Zoom in and check whether the table is attached to an anchor or constrained by the drawing layout. If selection remains difficult, click empty sheet space to clear the current selection, then try the section border again. Use the table’s context menu or properties to inspect available positioning controls rather than dragging cell contents.

Text or headings look wrong after splitting. Check the table properties and formatting options for that table type, and compare the result with the original section. A heading may not repeat automatically, or a long cell value may wrap after the section becomes narrower. Adjust column widths or the supported heading settings, then review the full table at print scale. If entries changed after a model update, rebuild or update the drawing and verify the row order and split location again.

The table is cut off in a PDF or printout. Move both sections fully inside the sheet boundary and inspect print preview or the exported PDF. Check the selected sheet size and print scaling; a table that appears to fit in the graphics area can still be clipped by the printable area. If it cannot fit legibly, use a larger sheet, rearrange drawing views, or follow your drafting standard for continuing the table on another sheet.

Frequently Asked Questions

Can I split a SOLIDWORKS table into more than two sections?

Often, you can split a resulting section again if the table type and release support it. Select a row or column in the section you want to divide and check its Split options. Make each additional split only after checking that the table remains readable and that the sections fit the sheet.

Does splitting a table change the model or its BOM data?

Splitting is a drawing-layout operation; it does not divide the model. A linked table can still reflect model or configuration changes, so update the drawing when needed and inspect the resulting sections for new, removed, or reordered entries.

Can I split a table across different drawing sheets?

A manual split generally creates separate sections that you can position in the drawing, but moving a section to another sheet may depend on the table type and SOLIDWORKS release. Check the section’s context menu and your version’s help. If it cannot be moved between sheets as a linked section, use a supported continuation or table-placement workflow rather than assuming a manual split will create one.

Can I undo a table split?

Yes. Press Ctrl+Z on Windows soon after the operation, or Command+Z on Mac, if undo is available. If you have made many later edits, use the saved copy or carefully reverse the layout changes instead of assuming one undo will restore the original table.

Why are the table headings missing or repeated?

Heading behavior depends on the table type, its settings, and sometimes the SOLIDWORKS release. Inspect the table properties and formatting controls for options related to headers or titles, then check both sections at the plotted scale. If the needed option is unavailable, you may need to adjust the table layout or add a clearly formatted drawing annotation that follows your drafting standard.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.