SolidWorks: Split One Part Into Two Bodies

How-to basics · Updated November 22, 2026

Yes. In SOLIDWORKS, use the Split feature to divide a solid part into two or more solid bodies; use Save Bodies if you also need the pieces as separate part files. The key distinction is that splitting creates bodies inside a part document, while saving bodies creates separate documents.

What the Split Feature Does

A SOLIDWORKS part document can contain one solid body or several. The Split feature uses a trim tool, such as a plane or suitable surface, to divide solid geometry. The result is a multibody part: the pieces are separate solid bodies, but they still belong to the same part file unless you save them separately.

This is useful when a design begins as one solid but needs to be manufactured, printed, analyzed, or edited as separate pieces. For example, you could model a housing as one solid, split it at a flat joint plane, and then save the upper and lower halves as individual part files. You can also keep both bodies in the original document for continued design work.

Do not confuse Split with Split Line. Split Line divides or marks faces for tasks such as assigning appearances or defining regions; it does not separate a solid into independent bodies. A split that creates bodies changes the solid model’s topology and can affect downstream features, drawings, and references.

Prepare the Part and Choose a Split Location

Before using the feature, decide where the pieces should separate and what geometry can define that boundary. For a straight division through a prismatic object, a reference plane is often the simplest trim tool. For a shaped boundary, a surface or sketch-based tool may be more appropriate, provided it intersects the solid in a way that divides it into valid regions.

Consider how the split relates to the part’s design intent. A joint through a mounting hole, thin wall, or curved transition may create awkward faces or fragile geometry. If the pieces need to fit together, account for the mating faces and any clearance required by the intended manufacturing process. SOLIDWORKS makes the geometric division; it does not decide whether the resulting interface is practical.

  • Save a working copy before changing a model used in a released design.
  • Confirm that the trim tool crosses the solid where you expect and does not leave a tiny sliver body.
  • Identify whether you need two bodies in one file or two separate part documents before proceeding.

How to Split One Part Into Two Bodies

The general workflow is to create or select a trim tool, run Split, and keep the resulting bodies you want. Exact icons and PropertyManager layouts can vary slightly between SOLIDWORKS releases, but the menu command is available from Insert > Features > Split in the part environment.

  1. Open the part and create the trim geometry if it does not already exist. For a simple division, select an existing plane or create a reference plane at the desired location.
  2. Choose Insert > Features > Split.
  3. In the Split PropertyManager, select the plane, surface, face, or other suitable geometry in the Trim Tools selection box. Check the preview to make sure the tool intersects the intended solid.
  4. Use the command to calculate the cut, then inspect the Resulting Bodies list. The number and shape of the previewed bodies depend on how the trim tool intersects the part.
  5. Select the bodies to retain, then accept the feature. If the tool divides the solid into exactly two regions, the part now contains two solid bodies.

If the preview shows only one body, the trim tool may not pass through the solid or may not divide it into separate volumes. Adjust the plane or tool, and check the preview from more than one view. If it produces more bodies than expected, inspect for extra intersections or small detached regions before accepting the result.

Save the Two Bodies as Separate Part Files

Separate bodies do not automatically mean separate files. To make independent part documents, use Save Bodies, commonly found at Insert > Features > Save Bodies. Select the bodies to save, assign file names and locations, and use the available option to create an assembly if the pieces should be delivered together in an assembly document.

For example, after splitting a housing into a lid and base, save each body with a descriptive name such as Housing_Lid and Housing_Base. Choose a stable folder and naming scheme before creating the files; moving or renaming referenced documents later can make it harder to resolve links. Keep the original multibody part if it is your master model or if you want to revise the split and regenerate the pieces.

Save Bodies can preserve a relationship between the original multibody part and the generated part documents. That can be useful when the master geometry changes, but it also means file references matter. If you intend the saved pieces to become fully independent, review the external-reference status and the SOLIDWORKS tools and policies available in your release before breaking or locking references. Do not delete the source document until you understand whether the derived files still depend on it.

Choose Between Bodies, Part Files, and an Assembly

Use the lightest document structure that meets the job. Keeping two bodies in one part is convenient for a single designer editing a unified shape. Separate part files are more suitable when the components need their own drawings, material assignments, manufacturing routes, or independent revisions. An assembly is useful when you need to show how the saved components fit together, move relative to one another, or appear as a deliverable set.

  • Two bodies in one part: Best for a conceptual division or a design that remains controlled as one model.
  • Separate part documents: Best when each piece needs an individual file, drawing, or production workflow.
  • Separate parts plus an assembly: Best when the pieces must be presented or managed together as components.

These choices are not interchangeable. A multibody part can be convenient for modeling, but it is not automatically an assembly and does not provide the same component-level structure. Conversely, creating an assembly does not itself split the original solid; first create or save the separate bodies.

Common Problems and How to Fix Them

The Split command creates no bodies. The trim tool may miss the solid, touch it without cutting through it, or fail to form a valid division. Move the plane, extend or revise the surface, and inspect the preview. A tool must create distinct solid regions, not merely draw a line across a visible face.

The result contains a sliver or extra body. A small overlap, angled intersection, or earlier feature can create an unintended region. Zoom in on the intersection and inspect every entry in Resulting Bodies. Modify the trim geometry rather than saving an unwanted fragment and trying to conceal it later.

The saved files do not update as expected. Check where the source part and derived files are stored and whether the references are resolved. A moved or renamed source can interrupt an associative workflow. When sharing the model, include the referenced files or use the appropriate SOLIDWORKS packaging workflow for the project.

A later feature fails after the split. Features created before a split may affect both bodies, while later features can depend on a particular face or body. If a downstream operation fails after editing the split, examine the feature tree and repair selections that refer to changed faces or edges. Where possible, select stable reference geometry rather than relying on a face likely to change.

Alternatives and Related Commands

Split is the direct choice when the goal is to partition a solid and retain the resulting regions. Other tools suit different intentions. Cut-Extrude removes material according to a sketch and may leave one solid or create multiple bodies depending on the geometry and feature settings. It is a material-removal feature rather than a dedicated body-saving workflow.

Split Line is for dividing faces or projecting boundaries, not for turning one solid into two solids. If the real goal is to create a separate component from geometry already in another part, workflows such as inserting or deriving a part may be more appropriate than cutting the original. Choosing among them depends on whether you want a physical division, a face boundary, or a new document based on existing geometry.

Frequently Asked Questions

Can I split a SOLIDWORKS part into exactly two pieces?
Yes. Position a suitable trim tool so it divides the solid into two regions, run Split, and confirm that the preview lists the two intended bodies. A tool that intersects the part more than once can produce additional bodies.

Does Split automatically create two files?
No. Split creates bodies within the part document. Use Save Bodies to create separate part files, and create an assembly as well if you need a document that brings those components together.

Can I split a part with a plane?
Yes, a plane can serve as a trim tool when it intersects the solid so that it separates the geometry into valid regions. Check the preview; a plane that only touches the part or fails to cross it may not create the division you want.

Will changing the original part update the saved pieces?
It can, when the saved part documents retain their external references to the multibody source. The result depends on the reference state and file locations, so verify the links before moving files or treating the derived parts as independent.

What is the difference between Split and Split Line?
Split divides solid geometry into separate bodies. Split Line creates boundaries on faces and is useful for visual or face-level operations, but does not by itself separate a solid into independent bodies.

Can I undo a split later?
You can edit, suppress, or remove the Split feature in the feature tree, subject to later features depending on its results. Save a copy first if the model is important, and check downstream features after changing the split.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.