To split a solid in Onshape, open a Part Studio, choose Split from the feature toolbar, select the part to divide, and select a plane, face, or surface as the splitting tool. Confirm the feature after checking the preview. Use the same feature to divide faces, or use the sketch Split tool when you need to break a sketch entity into separate segments. The steps below explain which workflow to choose and how to resolve common failures.
What You’ll Need
- An Onshape document with a Part Studio containing the part, face, or sketch entity you want to split. You need permission to edit the document.
- A suitable splitting reference: for a solid, usually a plane, planar face, or surface that intersects it. You can also create a work plane first if the split needs to happen at a particular angle or offset.
- A saved version or a clear plan for the feature sequence. Onshape is parametric, so a split is added to the feature list and can be edited later, but changing an earlier feature may affect downstream features.
Step-by-Step
- Open the correct Part Studio. Open the document and select the Part Studio tab containing the geometry. A split is a Part Studio feature; it is not the same as moving components apart in an Assembly. If the target is currently only a sketch, decide whether you mean to divide the sketch geometry itself or split a solid made from it. For a solid split, the part must exist as a Part Studio part before you begin.
- Choose the kind of split you need. Use the Split feature to divide a solid part into separate parts, or to divide a face into smaller faces without turning one solid into multiple parts. Use the Split command while editing a sketch to divide an individual sketch entity at a selected point. These operations have different results: splitting a face changes its boundaries, while splitting a part creates separate part regions that can be selected independently.
- Prepare the splitting tool. Decide where the dividing boundary should pass. A default plane such as Front, Top, or Right works if it crosses the target at the right location. For a custom location, create a plane using the Plane feature or use an existing planar face or surface. Check that the tool actually intersects the geometry. A plane parallel to a part’s broad face may miss the part entirely, while a plane that just touches an edge may not create two useful regions.
- Start the Split feature. In the Part Studio feature toolbar, click Split. The feature dialog will show selection fields for the geometry and the splitting tool. If you cannot see the command, check that you are in a Part Studio and not editing a sketch or viewing an Assembly. You can also use the feature search available in the Onshape interface to locate the command, if it is available in your current layout.
- Select the entity to divide. For a part split, click the solid part in the graphics area or select it from the Parts list. For a face split, select the face or faces you want divided. Make sure the selection field contains the intended item; selecting an entire part when you only want a face boundary can produce a different result. If several overlapping parts make selection difficult, hide the parts you do not need or select the target from the Parts list.
- Select the splitting tool. Click the dialog’s splitting-tool field, then select the plane, face, or surface that defines the cut. The tool is a reference for the split; it does not act like a saw that removes a strip of material. For example, a plane passing through the middle of a block divides it along that plane, without creating a kerf or gap. If you want a physical gap, create it with an appropriate cut feature instead.
- Review the preview and options. Look at the whole model, not just the point where the tool crosses it. Confirm that the preview shows the intended regions and that the correct part or face is affected. If the dialog offers an option such as keeping both sides, choose it when you want both resulting sides retained. Available controls can depend on the selection and feature context. If the preview is wrong, do not accept it yet: change the selected target or tool, or cancel and adjust the reference.
- Accept and verify the result. Click the check mark in the feature dialog to create the split. For a part split, inspect the Parts list and click each resulting part to confirm that the regions are separate and that no side was discarded. For a face split, rotate the model and inspect the new edge or face boundary. For either result, edit the Split feature later if the dividing location needs adjustment; downstream features may need attention if the split changes the geometry they reference.
- For a sketch entity, split it while editing the sketch. Edit the sketch, choose the sketch Split command from the sketch toolbar, and click the entity at the point where it should become two entities. Finish the sketch and inspect the segments. This does not cut a solid. If you need a solid divided, finish the sketch and use it to make suitable solid or surface geometry, then use the Part Studio Split feature. A sketch split point must lie on the entity; clicking beside it may select a different object or leave the entity unchanged.
Common Mistakes
Using the wrong Split command. Onshape has different contexts for sketch editing and Part Studio features. The sketch command divides sketch geometry; the Part Studio feature divides parts or faces. If the result you need is two selectable solids, use the Part Studio feature rather than splitting a line in a sketch.
Choosing a tool that does not cross the target. A plane or surface must intersect the selected geometry in a way that creates a division. A plane outside the part, or one that only touches it at a point or edge, may fail or create an unexpected boundary. Check the view from more than one angle and reposition the tool before accepting.
Selecting the wrong object. When edges, faces, and parts overlap under the cursor, it is easy to select a face when you meant a part, or to select a nearby body. Confirm the highlighted geometry and the selection list in the dialog. The Parts list can make it easier to pick a particular solid when the graphics area is crowded.
Expecting the feature to remove material. A split establishes a boundary; it does not automatically create a gap or remove a slice. If you need a slot or a specific amount of material removed, use a cut or other material-removal feature with the required width. If you need separate regions for later operations, a split is the more appropriate tool.
Tips
Give a custom work plane a useful name, such as Midplane for split, before using it. A descriptive name makes the feature tree easier to understand, especially when a model has several planes. If the plane is defined by an offset or angle, editing that plane later is usually clearer than trying to repair a complicated split selection.
For a clean part split, position the tool so it passes fully through the region you intend to divide. A plane is often the most straightforward tool for a flat division; an existing face or surface is useful when the boundary needs to follow non-flat geometry. Check the preview before accepting, because a valid split may still divide the wrong region.
Think ahead about feature order. A split placed before fillets, holes, or other detail features may change which part those later features act on. If you want the details to apply to the finished individual pieces, splitting earlier can be helpful, but inspect downstream features after editing the split. If later features refer to a face that no longer exists in the same form, reselect the appropriate geometry.
Use names and visibility controls to keep complex models manageable. Rename important parts in the Parts list when that helps distinguish the two sides, and hide unrelated parts while making selections. These steps do not change the model, but they reduce selection mistakes and make it easier to confirm which result belongs to which side of the dividing tool.
Troubleshooting
The feature reports an error or will not accept the selection: Confirm that you selected a supported target and a valid splitting tool, and that the tool intersects the target. If you used a face or surface, check whether its usable extent reaches across the entire intended boundary. Try a plane as a diagnostic: if a plane works but the surface does not, the issue is likely the surface’s position or shape. Clear and reselect the dialog fields if an unintended edge or face was added.
The preview shows only one side or the wrong side: Check whether the tool actually passes through the whole solid and whether the feature options retain the side or sides you need. Move or redefine the plane, then inspect the preview from a different angle. If the target is a face, make sure you selected the face rather than the complete part. Do not accept the feature until the displayed result matches the intended division.
The split succeeds, but the parts are not separate: Check whether you performed a face split rather than a part split. A face split creates separate face regions on the same part; it does not produce independently selectable solids. Edit the feature and select the solid part as the target, then verify that the tool divides the solid into distinct volumes. Also inspect the Parts list after accepting rather than judging only by the visible seam.
The sketch Split command does nothing: Make sure you are actively editing a sketch and have chosen the sketch command, not the Part Studio feature. Click directly on the sketch entity at the point where it should divide. If the point is near an endpoint or another overlapping entity, zoom in and try again. Finish the sketch and check whether two segments can be selected independently.
A later feature fails after you change the split: Edit the failed downstream feature and review its selections. The split may have changed or replaced a face or edge that the later feature referenced. Select the corresponding new geometry and confirm the feature again. If many later features depend on the old topology, consider moving the split later in the feature list or redesigning the references around stable planes and sketches.
Frequently Asked Questions
Does splitting a part create two separate parts in Onshape?
Yes, when you use the Part Studio Split feature on a solid and the tool divides it into separate regions, the resulting solids can be separate parts. Confirm the result in the Parts list. Splitting a face is different: it divides face regions but leaves them on the same part.
Can I split a part with a sketch?
A sketch line by itself is not the same as a splitting surface. Use the sketch to create suitable surface geometry or a plane, then select that tool in the Part Studio Split feature. The exact construction depends on the shape and how the sketch is oriented; verify that the resulting tool intersects the part.
Can I split a curved face?
You can split faces using a suitable intersecting tool, but the tool must create a valid boundary on the selected face. A plane may work for some curved faces; a surface may be needed for a more complex division. Check the preview and try a simpler reference if the chosen tool does not produce a clear division.
How do I split a sketch line without cutting a solid?
Edit the sketch and use the sketch Split command, then click the entity at the desired division point. This creates separate sketch segments and does not change an existing solid. If you are trying to separate a solid, use the Part Studio Split feature instead.
Can I undo or edit a split?
You can undo the most recent operation with the interface’s undo control, or edit or delete the Split feature in the feature list. Editing is usually preferable when you want to change the dividing tool or selection while preserving the rest of the feature history. Afterward, check any features that depend on the split geometry.
Related
- Java split(): How It Handles Delimiters and Limits
- Java String split(): Syntax, Regex, and Examples
- Split a String in Excel: Separate Text into Columns
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- How to Change Date Format in Excel on Windows 11To change how dates appear in Excel on Windows 11, select the date cells, press Ctrl+1, choose a…
- How to Insert a Long Horizontal Line in WordTo add a long horizontal line in Word, use Insert > Shapes > Line and drag across the…
- How to Copy a Line in Excel: Rows, Cells, and ShortcutsTo copy a line in Excel, select the row by clicking its number, press Ctrl+C, click the number…
- Excel Mini Calendar and Date Picker: Your OptionsExcel for Microsoft 365 on Windows does not include a universal pop-up calendar that you can attach to…
- How to Set Up Auto Forward in Outlook for MacTo automatically forward every new message from Outlook for Mac, open your mailbox in Outlook on the web,…
- How to Lock an Excel File With a Password to Open ItTo lock an Excel file so nobody can view it without a password, open it in Excel for…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.