How to Use Macros on SteelSeries Keyboards and Mice

VBA & macros · Updated November 22, 2026

To use a macro on a SteelSeries keyboard or mouse, open SteelSeries GG, select the device in Engine, assign a Macro action to a button, record or edit the sequence, and save it. A macro can run a group of keystrokes or supported button actions from one press. You will need SteelSeries GG, a compatible connected device, and an available key or button; the exact controls vary by model and software version.

What You’ll Need

  • A SteelSeries keyboard or mouse that supports customizable keybindings and macros. Not every model supports every Engine feature.
  • SteelSeries GG installed on your computer. Download the version for your operating system from SteelSeries, then open the Engine section.
  • The device connected and detected in GG. A wired connection is simplest for setup, but a supported wireless device can also work.
  • A spare or remappable key/button for the macro, and a safe place to test it, such as a blank text document.

Step-by-Step

  1. Open SteelSeries GG and check the device. Start GG and choose Engine. Your compatible SteelSeries devices should appear there. Select the keyboard or mouse you want to configure. If it is missing, reconnect it, try another USB port or receiver, and check that GG recognizes it before continuing. Install any offered GG or device firmware update only when you can leave the device connected until the update finishes.
  2. Choose the profile you want to edit. Device settings may be organized into profiles, configurations, or game-specific configurations. Select the one that should contain the macro. If the macro should work in a particular game or application, use its profile if GG offers one; otherwise configure the default profile. Remember that a macro assigned to one profile may not be active in another.
  3. Pick a key or mouse button to assign. In the device layout or keybindings area, click the key or button you want to change. Choose a control you do not rely on for an essential action. On a keyboard, avoid replacing a key that you need for normal typing unless you are comfortable switching profiles. On a mouse, check that the selected side button is reachable without an accidental click.
  4. Open the macro assignment option. In the selected control’s action menu, choose Macro or the equivalent macro assignment. Depending on the device and GG version, you may see a button such as New Macro, Create Macro, or an option to open the Macro Editor. If no macro choice appears, the device, selected control, or current software version may not support it.
  5. Create and record the sequence. In the editor, create a new macro and give it a useful name, such as Insert signature or Quick reload. Start recording, perform the actions in the intended order, then stop recording. Use only actions the editor offers. Some versions or devices allow keyboard inputs, mouse-button inputs, or both; do not assume that cursor movement or every system action can be captured. If your macro simply types a short phrase, record the characters carefully and review the sequence before saving.
  6. Review timing and playback behavior. Inspect the recorded events and their delays. If the editor records pauses that are too long, shorten them where the interface permits; if an application misses inputs, add a small delay between actions. Select an available playback mode, such as playing once or repeating while the assigned control is held, if those choices are shown. Choose the simplest mode that suits the task. Repeating a sequence can send many inputs quickly, so avoid a repeat setting unless you need it.
  7. Save the macro and assign it to the control. Save the edited sequence, then make sure it is actually selected for the key or button you chose. Some versions return to the device layout after editing; others keep the assignment panel open. Apply, save, or confirm the configuration if the interface offers that step. Check the selected profile again so you do not accidentally save the macro to a different profile.
  8. Test it in a harmless place. Open a blank text editor and press the assigned control once. For a typing macro, check the characters, order, and spacing. For a button sequence, test in an application where the actions will not submit a form, delete work, or trigger an unwanted command. If it behaves incorrectly, return to the editor, change one setting at a time, save, and test again.
  9. Check whether it needs GG to remain open. Keep GG running during the first tests. Macro operation and profile storage differ across devices: some settings may be available through onboard device memory, while others may depend on GG or a software profile. Consult the documentation for your exact model if you need the macro to work on another computer or when GG is closed. Do not assume every macro or playback option transfers to onboard memory.

Common Mistakes

Editing the wrong profile: A macro can appear to disappear when you switch to another configuration. Confirm the active profile in GG before testing, and check whether the application changes profiles automatically.

Forgetting to assign the saved macro: Creating a sequence in the editor does not always bind it to the selected key. Return to the device layout and verify the control shows the macro action.

Recording unwanted inputs: A recording can include an extra key press, a long pause, or a mouse click made while starting or stopping. Review the event list and remove mistakes if the editor lets you edit individual events. Re-recording a short macro can be quicker than trying to fix a messy sequence.

Choosing a repeat mode by accident: A repeating macro may continue to send actions while held or toggled. For a one-time text insertion or command, use a play-once option if available. Stop the playback or switch profiles if a repeat starts unexpectedly.

Expecting the same behavior in every app: Applications can interpret inputs differently, and some may ignore simulated or rapid inputs. Test in the actual program, but begin in a low-risk location. Also check the application’s own shortcuts and rules before automating actions.

Tips

Keep macros short and specific. A sequence that performs one predictable task is easier to review and less likely to cause trouble than a long chain of unrelated actions. Name each macro for its purpose, especially if you create several for different profiles.

Use a dedicated, easy-to-reach control and leave frequently used keys intact. If the device supports multiple profiles, keep a standard profile for everyday use and a separate one for an application that needs special bindings. Confirm the active profile before relying on a macro.

When timing matters, begin with modest delays rather than making the macro as fast as possible. A desktop application may need time to respond between commands. If the first action is missed, add a small initial delay if supported; if later actions are missed, add pauses between those events. Change one delay at a time so you can tell what fixed the issue.

Keep a written note of what a macro does and which control starts it. This is useful if you return to the setup later or share the computer. For work involving important files, avoid assigning a macro that can overwrite, send, or delete content unless you can verify each step safely.

Troubleshooting

GG does not show the device: Reconnect the cable or wireless receiver, try a direct USB port rather than a hub, and restart GG. Check for software updates and confirm your specific model is supported by the installed version. For wireless devices, check the battery and ensure the receiver is paired as instructed by the manufacturer.

There is no Macro option: Select a different remappable control and look again. Some keys have fixed functions, and not all SteelSeries devices support macros. Update GG if an update is available, then check the device’s feature list or support documentation instead of assuming the option exists for every model.

The assigned control does nothing: Confirm that the macro is saved, assigned to that exact control, and stored in the currently active profile. Keep GG open for testing, then close and reopen it if the configuration appears stuck. Test another remappable control to rule out a faulty button, and verify that the application is not capturing or blocking the input.

Only part of the sequence runs: Review the event order and make sure recording stopped after the final intended action. Add a short delay between events if the target app responds slowly. Re-test outside the app to see whether the macro itself is incomplete or the app is ignoring part of the sequence.

It works only while GG is open or on one computer: This can be a device-storage limitation rather than a recording error. Check your model’s documentation for onboard profile support and which settings it can store. Keep GG active if the macro depends on its software, and do not count on a saved macro being portable until you have tested it on the other computer.

The macro repeats or triggers unexpectedly: Reopen its playback settings and choose a one-shot mode if that is the intended behavior. Check whether the binding is set to repeat while held or toggle repetition, and test the control without holding it down. Remove the binding temporarily if you need to stop an unintended sequence immediately.

Frequently Asked Questions

Can I make a macro on any SteelSeries keyboard or mouse?
Not necessarily. Macro availability depends on the model, the selected control, and the version of SteelSeries GG. Check the device layout for a Macro action and consult the model’s specifications if it is missing.

Can I use a macro without SteelSeries GG running?
It depends on whether your device can store the relevant configuration onboard. Some features may rely on GG or a software profile. Check the documentation for your exact device, then test after closing GG rather than assuming the macro is stored in hardware.

Can a macro include both keyboard and mouse actions?
That depends on the editor and device. Use the event types shown in your Macro Editor; if it does not offer a particular input, that action cannot be added through that interface.

Why does my macro work in a text editor but not in a game?
The game may handle inputs differently, require a particular window to be focused, or block simulated or rapid actions. Check the game’s settings and rules, test a simple sequence, and avoid using automation that the game prohibits.

How do I change or delete a macro?
Open the device and profile where it is assigned, select the bound key or button, and reopen its macro settings. Edit and save the sequence, or change the binding to another action. Labels and deletion controls vary by GG version, so confirm the selected macro before removing it.

Can I assign a macro to a key I still need normally?
You can remap a supported key, but doing so may replace its usual function in that profile. Choose a spare control or use a separate profile so you can switch back to normal key behavior when needed.

Related

Try it: the Column Letter to Number: aA is 27, XFD is 16,384. Converts both ways.

More in VBA & macros

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.