The Federal Reserve balance sheet graph is available on FRED as the weekly series WALCL: Total Assets. It shows the dollar value of the Fed’s assets over time; use the chart to see the expansion after the 2008 financial crisis, the rapid rise during the 2020 pandemic response, and later reductions.
WALCL is a useful starting point, but it is not a chart of money held by households, bank loans, or the federal government’s debt. Understanding what it measures—and what it leaves out—makes its sharp rises and falls easier to interpret.
Where to Find the Federal Reserve Balance Sheet Graph
FRED, the Federal Reserve Bank of St. Louis’s economic data site, provides an interactive graph of WALCL. The series is based on the Federal Reserve’s weekly H.4.1 release, which reports the central bank’s assets and liabilities. The Fed publishes the release on Thursdays, and the main balance-sheet figures are generally reported for Wednesday, so the chart is a weekly snapshot rather than a daily account.
On the FRED page, the graph and data table appear together. You can change the chart’s date range, inspect values by hovering over points, and download the data. The series is reported in millions of U.S. dollars. To express a value in trillions, divide the figure in millions by 1,000,000. For example, 8,965,000 million dollars equals 8.965 trillion dollars.
For the underlying release, see the Federal Reserve’s H.4.1 statistical release. It contains more detail than the single total-assets line, including separate categories of assets and liabilities. If you need a specific observation for a report or analysis, check the release date and the units rather than relying on a screenshot of the graph.
What the Balance Sheet Measures
A balance sheet is a snapshot of what an institution owns and what it owes at a particular time. On the Fed’s asset side, the largest categories are typically U.S. Treasury securities and mortgage-backed securities issued or guaranteed by federal agencies. Other entries can include loans to financial institutions, foreign currency assets, and items related to the Fed’s role as the U.S. central bank.
The other side records liabilities and capital. Important liabilities include physical currency in circulation, reserve balances that commercial banks hold at Federal Reserve Banks, and the Treasury General Account, the U.S. Treasury’s account at the Fed. The Fed also has other liabilities, including amounts associated with its overnight reverse repurchase operations. In accounting terms, total assets equal total liabilities plus capital.
WALCL tracks the total asset side, not each component and not the amount of cash circulating in the economy. When the Fed buys a security, its assets rise; payment is generally reflected in the banking system through changes to reserve balances or other Fed liabilities. Those accounting changes help explain why the balance sheet can grow without the same amount of new cash being handed directly to consumers.
How to Read the Graph
Start with the horizontal axis, which shows dates, and the vertical axis, which shows the value of total assets. A steep upward slope means the reported total grew quickly over that period; a downward slope means it declined. Check the axis units before comparing values: WALCL is in millions, even though readers often discuss the total in trillions.
Look at both the level and the rate of change. A balance sheet that rises from $4 trillion to $5 trillion has increased by $1 trillion, but that is a 25% increase. A rise from $8 trillion to $9 trillion is also $1 trillion, but it is a smaller percentage increase. The same dollar change can therefore look different depending on the starting level and the graph’s scale.
For a close comparison, use the data table or download the observations instead of estimating from the line. A chart can visually exaggerate or compress changes when the displayed date range or vertical axis changes. Also remember that weekly values are snapshots: a short-lived movement between reporting dates may not be visible as a separate point.
Major Historical Movements
The graph’s long-run shape reflects several distinct periods of policy and financial stress. Before the 2008 financial crisis, the Fed’s balance sheet was much smaller than it became afterward. During the crisis, the Fed created emergency lending facilities and bought securities, including Treasury and agency mortgage-backed securities. Its total assets rose substantially as it acted to support market functioning and monetary policy.
Further large-scale asset purchases after the crisis pushed the total higher over the following years. The Fed later began reducing its holdings, a process commonly called balance-sheet runoff or quantitative tightening. That reduction was interrupted when the coronavirus pandemic brought extraordinary economic and market disruption in 2020. The Fed again bought large amounts of securities, and total assets climbed rapidly, reaching roughly $9 trillion in 2022.
After the pandemic-era peak, the balance sheet declined as securities matured and the Fed allowed a portion of the proceeds to run off rather than replacing them. The exact pace and eventual stopping point depend on policy decisions and economic conditions, so readers should consult the latest H.4.1 release or the current FRED graph for the latest figure. Historical peaks are useful landmarks, but they do not by themselves say whether policy is currently appropriate or restrictive.
Why the Balance Sheet Changes
Asset purchases and lending are the most visible reasons the total can rise. When the Fed buys Treasury or agency mortgage-backed securities, it adds those securities to its assets. It can also expand its balance sheet when it lends through a facility or when financial-market conditions lead institutions to use Fed liquidity programs. Such actions have different purposes and terms; a temporary loan is not the same thing as a long-term securities purchase.
The balance sheet can shrink when securities mature and the Fed does not reinvest all the principal, or when loans are repaid. A decline does not necessarily mean the Fed sold every security shown in the graph. In a runoff program, holdings may fall gradually as payments arrive, subject to the policy framework in effect at the time. Changes in certain non-policy items can also affect totals, which is another reason to check the detailed release when a move seems surprising.
Interest-rate decisions and balance-sheet decisions are related parts of monetary policy, but they are not identical. The Fed can raise or lower its target interest rate while its asset total is stable, rising, or falling. A balance-sheet graph alone therefore cannot tell you the full stance of policy. To assess the broader picture, readers also follow policy-rate announcements, inflation and employment data, and financial conditions.
Quantitative Easing and Quantitative Tightening
Quantitative easing, or QE, generally refers to large-scale purchases of securities intended to support financial conditions and monetary-policy goals, especially when short-term interest rates are near their effective lower bound. QE usually increases the Fed’s assets and creates corresponding changes in liabilities, including reserve balances. It is not the same as a direct grant to the public, and it does not guarantee that banks will make a particular amount of new loans.
Quantitative tightening, or QT, is the broad term for reducing the Fed’s securities holdings, often by allowing some securities to mature without full reinvestment. In the graph, QE may appear as a rapid climb and QT as a gradual decline, but the line does not show the mechanics of a particular program. Details such as monthly caps, reinvestment rules, and any changes to the program are announced by the Fed and can change over time.
A common misconception is that a falling balance sheet automatically means the economy is losing an equal amount of money. The graph measures Fed assets, while the liability side and the distribution of funds across banks, the Treasury, and other institutions also matter. QT can affect reserves and market liquidity, but the total-assets line by itself does not quantify the effect on household spending, bank lending, or inflation.
How It Differs from the National Debt and the Money Supply
The Fed’s balance sheet is not the same as the U.S. national debt. The national debt is the federal government’s outstanding borrowing, managed by the Treasury. Treasury securities are one type of asset the Fed may hold, but the total value of those holdings is only one part of the Fed’s balance sheet. The Treasury also owes debt to investors and institutions other than the Federal Reserve.
Nor is total Fed assets a direct measure of the money supply. Measures such as M1 and M2 cover monetary assets held by households and businesses under their respective definitions. WALCL includes securities and other assets owned by the Fed, not just currency or deposits available for spending. These measures can move in related ways, but they answer different questions and should not be treated as interchangeable.
If you want to understand how much Treasury debt the Fed holds, look for the relevant security category in the H.4.1 release rather than treating all of WALCL as government bonds. If you want to know how much currency is in circulation, consult the currency liability figures. Choosing the measure that matches the question avoids misleading comparisons.
Limitations and Common Misreadings
The headline graph is intentionally simple: one weekly series for total assets. That makes it good for showing long-term scale and direction, but poor for explaining every movement. A total-assets line cannot identify whether a change came from Treasury holdings, mortgage-backed securities, emergency lending, or another category. Use the release tables for that breakdown.
It is also a nominal dollar series. It does not adjust for inflation, population growth, or the size of the economy. To compare the Fed’s footprint across decades, analysts may compare the balance sheet with GDP or adjust values for inflation, while clearly stating the method and date range. Those transformations can answer different questions from the raw-dollar graph.
Finally, do not infer a guaranteed market outcome from the curve. A rising total does not automatically predict higher stock prices or inflation, and a declining total does not guarantee a recession. Economic effects depend on the reason for the change, expectations, interest rates, bank behavior, fiscal policy, and many other conditions. The graph is a useful factual record, not a standalone forecast.
Frequently Asked Questions
What is the Fed balance sheet graph called?
On FRED, the commonly used total-assets series is WALCL, titled Total Assets. It reports the Federal Reserve’s total assets in millions of U.S. dollars at a weekly frequency.
How often is the Federal Reserve balance sheet updated?
The H.4.1 release is published weekly, generally on Thursday, with the main figures representing Wednesday levels. The FRED series updates when new observations are added to its source data.
Does a rising Fed balance sheet mean money printing?
Not in the literal sense of printing banknotes. Asset purchases and lending can increase Fed liabilities such as bank reserves, but WALCL itself records assets. It does not show how much new physical currency was printed or how much credit banks extended.
Why does the Fed shrink its balance sheet?
The Fed may let securities mature without fully reinvesting the proceeds as part of a policy normalization or tightening process. The purpose and pace depend on the policy decisions in force, so check current Federal Reserve statements for the latest explanation.
Is the Fed balance sheet the same as U.S. government debt?
No. Government debt is Treasury borrowing. Treasury securities are among the Fed’s assets, but WALCL also includes other assets, and most Treasury debt is held outside the Federal Reserve.
Related
- Environmental Audit Checklist Excel: Build and Use One
- Energy Audit Template in Excel: What to Include
- How to Indent Text in an Excel Cell
Try it: the Percentage Formula Generator: percent of, percent change, increase and decrease, with the formula.
More in Charts & pivot tables
- Adding Power Pivot to Excel: Enable and Use ItTo add Power Pivot to Excel for Microsoft 365 on Windows, go to File > Options > Add-ins,…
- Excel Pivot Table: Show Errors as BlankTo show errors as blank in an Excel PivotTable, select the PivotTable, open PivotTable Analyze > Options, go…
- Double Stacked Bar Chart in Excel: How to Create OneTo create a double stacked bar chart in Excel, put each bar you want to compare on its…
- Excel Power Pivot Relationships: How to Create and Use ThemExcel Power Pivot relationships connect tables in the Data Model through matching columns, so you can analyze related…
- Stacked Column Waterfall Chart in Excel: How It WorksYes—you can make a stacked column waterfall chart in Excel, but Excel does not offer a chart type…
- Insert an Excel Pie Chart into PowerPointTo insert an Excel pie chart into PowerPoint, select the chart in Excel, press Ctrl+C, switch to PowerPoint,…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.