To combine multiple solid parts in Onshape, open the Part Studio containing them, choose the Boolean feature, set the operation to Union, select the parts, and confirm. The result is one solid part where the selected solids form a continuous body. Before starting, decide whether you want a single editable Part Studio part or simply want separate components positioned together in an Assembly; those are different tasks.
Boolean Union changes the geometry in a Part Studio. It does not fasten components in an Assembly, and it does not merely group parts for easier selection. Keep a copy or leave the original parts available if you may need to edit them independently later.
What You’ll Need
- An Onshape document with a Part Studio that contains the solid parts you want to combine. If the parts are in separate Part Studios, you can bring them into one using the Derived feature first.
- Parts that intersect or meet along suitable faces so Onshape can form a valid solid. Parts that only touch at a single point or along an edge can produce an invalid result.
- Permission to edit the document. If it is view-only, ask for edit access or make a copy that you are allowed to modify.
Step-by-Step
- Open the right Part Studio. Open the Onshape document and select the Part Studio tab that contains the parts. Check the Parts list on the left and the graphics area to confirm that the intended parts are present. Boolean operations act on parts in a Part Studio; selecting components in an Assembly will not combine their geometry into one Part Studio part.
- Bring parts together if they are in different tabs. If a required part lives in another Part Studio, use the Derived feature in the destination Part Studio to reference it. Choose the source document and Part Studio, select the part or parts to derive, and confirm the feature. Position or orient the derived geometry as needed before doing the union. A derived part remains linked to its source, so later source edits can affect the destination.
- Check the geometry before combining. Rotate the model and inspect where the parts meet. For a dependable union, the solids should overlap or share a face in a way that creates one valid, connected solid. A visible gap means the result will remain separate or the operation may fail. If the parts are meant to meet, edit the sketches or features that define their locations, or use a suitable transform, so the geometry actually reaches the intended contact area.
- Start the Boolean feature. In the Part Studio feature toolbar, select Boolean. If you do not recognize the icon, hover over toolbar icons to read their names. The Boolean dialog opens with an operation selector and a selection field for the parts involved. You can also use Onshape’s feature toolbar search if it is available in your interface to locate the feature.
- Choose Union. Set the Boolean operation to Union. Union adds the selected solids together; it is different from Subtract, which removes one solid’s volume from another, and Intersect, which keeps only their shared volume. Confirm the operation before selecting parts so you do not accidentally use a different Boolean mode.
- Select every part to include. Click each intended part in the graphics area or select it from the Parts list, following the dialog’s active selection field. Make sure the selection includes all the pieces you want in the final body and excludes parts that should stay independent, such as a bolt, bearing, or movable cover. If selecting in the graphics area is difficult, hide or temporarily move unrelated parts, then restore them after selection.
- Decide whether to keep the originals. If the dialog offers Keep tools, turn it on when you want the source parts to remain available alongside the union result. This is useful while checking the outcome or when you need a reference for later edits. Turn it off when you want the original tool parts consumed by the operation and only the combined result to remain. Keeping originals can leave overlapping parts in the model, so verify which bodies are visible and present in the Parts list.
- Confirm and inspect the result. Click the green check mark to accept the feature. Look at the Parts list: a successful union should produce one part for the selected connected solids, unless you kept the original tools as well. Rotate the model and inspect seams, openings, and contact areas. A seam may still be visible as an edge where faces meet; that does not necessarily mean the union failed. The important check is that the intended geometry is one part and the feature has no error indicator.
- Name and test the feature. Rename the Boolean feature in the feature list to something informative, such as Union housing and bracket. If the result is not what you expected, edit the Boolean feature and adjust the selection or Keep tools setting. You can also suppress or delete the feature to return to the earlier state, then correct the source geometry and try again.
For example, suppose a Part Studio contains a bracket and a reinforcing rib that overlap. Select both under Boolean Union. If they form one connected volume, the Parts list should show a single resulting body when the tools are not retained. If a separate pin is also in the Part Studio but should remain removable, leave it out of the Boolean selection. The pin will remain its own part rather than becoming fused into the bracket.
Common Mistakes
- Using Union when you only need an Assembly. If parts should move relative to one another or be replaced separately, keep them as separate parts and insert them into an Assembly. Union removes the distinction between the selected geometry in the resulting solid, so it is not the right way to represent a hinge, sliding joint, or serviceable fastener.
- Selecting a surface or sketch instead of a solid part. Boolean Union works on solid parts, not on a sketch region, construction geometry, or an open surface that does not enclose a solid. Confirm that the selected item is listed as a part and that its feature history creates a solid.
- Assuming visual contact is enough. Two faces can look flush while a tiny gap remains, especially after importing or positioning geometry. Zoom in, inspect the relevant dimensions, and correct the defining feature rather than relying on appearance alone.
- Including a part that should stay separate. Selecting every visible item can fuse a component that is supposed to move or remain replaceable. Make the selection intentionally and check the Parts list before accepting.
- Leaving Keep tools on without noticing. The union may succeed while the original parts remain visible or overlap the result. That can make the model appear doubled or cause confusion during export. Check the checkbox and resulting Parts list, not just the shaded view.
- Expecting a Boolean to combine Assembly instances. An Assembly organizes positioned components and their mates; it does not create a new solid by itself. Return to a Part Studio and create or derive the solids there if a single fused body is the actual goal.
Tips
- Keep a reversible workflow. Onshape features are history-based, so place the Boolean feature after the features that create and position the parts. Keep the source geometry and feature history rather than replacing the whole model with a flattened import, unless that is specifically what you need.
- Use descriptive names. Rename the feature and, when useful, the final part. Names such as Union base and gussets make later edits easier than a generic feature label, especially in a long Part Studio.
- Union in sensible groups. If a model has many components, combine only the parts that truly need to form one body. Separate groups by function, such as a one-piece molded shell versus removable hardware. This makes errors easier to isolate and preserves useful part boundaries.
- Check the result at more than one scale. Zoom in at joints to catch gaps or unwanted slivers, then zoom out to check the full shape. A successful feature can still produce a design that is wrong for its intended fit or manufacturing process.
- Think about what happens next. If you plan to export, create a drawing, or use the model in an Assembly, confirm that the resulting part structure matches that task. A single fused part is useful for a one-piece body, but it is not a substitute for a multi-part assembly when separate components matter.
Troubleshooting
The Boolean feature shows an error. Edit the feature and check that Union is selected, that each selection is a solid part, and that the intended parts are included. Then inspect the contact regions for gaps, tiny sliver faces, or invalid geometry. If the parts only meet at a point or edge, change the design so they overlap slightly or share a robust face. Avoid arbitrary changes to critical dimensions; modify the source feature that controls the fit.
The result still shows more than one part. The selected solids may not be connected, or one or more parts may have been omitted. Check the Boolean selection and look for a gap between bodies. A Union can leave separate solids as separate parts when they do not form one connected volume. Move or edit the geometry if they are meant to join; otherwise, separate results may be correct.
The model looks doubled after the operation. Edit the Boolean feature and inspect Keep tools. If it is enabled, the original parts can remain in addition to the union result. Turn it off if you want only the result, or hide the originals if you intentionally kept them for reference. Also check the Parts list to distinguish a retained tool from a duplicate-looking edge or face.
A derived part is missing or does not update as expected. Confirm that you selected the correct source Part Studio and part when creating the Derived feature. Because derived geometry references its source, check that the source part still exists and that the relevant source feature has not been suppressed or changed. Resolve the source issue first, then return to the destination Part Studio and check the derived feature for an error.
You need to undo the operation. Use the feature history: edit, suppress, or delete the Boolean feature, or undo immediately if it was the most recent action. Correct the parts or selection and recreate the union. Since the model is feature-based, there is usually no need to remodel the original parts from scratch.
Frequently Asked Questions
Does Boolean Union permanently fuse parts?
It creates a union feature in the Part Studio history, so the result behaves as one part while the feature is active. You can edit or remove the feature later. Whether the original tool parts remain depends on the Keep tools setting.
Can I combine parts from separate Part Studios?
Yes. Bring the required geometry into one destination Part Studio with the Derived feature, then apply Boolean Union there. The derived geometry references its source, so changes to the source can affect the destination.
Can I combine parts in an Assembly?
Not by using Boolean Union directly on Assembly components. An Assembly is for positioning and relating components. Create or derive the geometry in a Part Studio and union it there if you need one solid body.
Will Union work if two parts only touch?
It can work when the contact creates a valid connected solid, such as a suitable shared face. Contact only at an edge or point is unreliable and may fail or leave separate solids. A small, intentional overlap or a properly designed shared face is usually more robust.
Why can I still see a line after combining the parts?
A visible line can be the boundary between two faces that remain on the fused solid. It does not by itself mean there are two parts. Check the Parts list and select the result to confirm that the geometry is one part.
Should I use Union for parts that need to move?
No. Keep movable or replaceable components separate and position them in an Assembly with appropriate mates. Use Union only when the selected solids are intended to form one continuous part.
Related
- Discounted Cash Flow Excel Template: Build and Use One
- CSV vs Excel: Key Differences and When to Use Each
- Delivery Schedule Excel: Create and Manage a Delivery Plan
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Format Zero as a Dash in Excel with Custom FormattingTo show numeric zeros as dashes in Excel without changing the underlying values, select the cells, press Ctrl+1,…
- List of Weekdays in Excel: 10 Practical MethodsTo make a quick list of Monday through Friday in Excel, enter a starting date and use the…
- Switch Excel Sheet View: Normal, Page Layout, and MoreTo switch an Excel worksheet’s display mode in Microsoft 365 for Windows, select View, then choose Normal, Page…
- Excel Statistical Analysis Tools and How to Use ThemExcel’s statistical analysis tools include the Analysis ToolPak add-in, statistical functions such as AVERAGE and T.TEST, and charts…
- Excel Inventory Tracker Template: How to Build OneThe fastest way to get an Excel inventory tracker is to use a built-in template: open Excel, go…
- Schedule Email in Outlook: Viva Insights and Send LaterTo schedule an Outlook email, use Outlook’s built-in Schedule send or Send later option; Viva Insights may offer…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.