The Federal Reserve balance sheet graph is a chart of the assets held by the U.S. central bank over time; a widely used version is FRED’s WALCL series. It shows the scale and timing of changes in the Fed’s holdings, but it is not a direct chart of the money supply, federal debt, or the amount of cash circulating in the economy.
Where to find the graph
For a straightforward, regularly updated chart, open the Federal Reserve Bank of St. Louis FRED page for series WALCL. The series is titled “Assets: Total Assets: Total Assets (Less Eliminations from Consolidation): Wednesday Level” and is sourced from the Federal Reserve’s weekly H.4.1 release. The official release is available from the Federal Reserve H.4.1 page.
WALCL reports the Fed’s total assets in millions of dollars. FRED can display the series in different units, so check the vertical axis before interpreting a value. A chart set to billions or trillions is easier to scan than one expressed in millions. The horizontal axis shows time, and each weekly observation is associated with Wednesday; that convention does not mean the Fed’s holdings change only on Wednesdays.
On FRED, you can change the displayed date range, units, frequency, and other graph settings. For example, viewing the series in trillions makes the broad long-run trend easier to understand, while a shorter date range helps show more detail around a particular period. If you need a value for a report or calculation, confirm its observation date and units on the series page rather than estimating it from the plotted line.
What the balance sheet measures
A central bank balance sheet follows the same basic accounting structure as other balance sheets: assets are matched by liabilities and capital. The Fed’s assets include securities it holds and certain loans or other claims. Its liabilities include Federal Reserve notes, reserve balances held by eligible institutions, and deposits such as the U.S. Treasury’s account at the Fed. Capital is much smaller than the main asset and liability categories.
The total-assets graph adds the asset side together. It does not tell you, by itself, what those assets consist of or which liabilities were created alongside them. For that detail, consult the H.4.1 release tables or separate FRED series. Those sources break out categories such as U.S. Treasury securities, agency mortgage-backed securities, and loans. The mix matters: two dates can show a similar total while the composition of assets and the conditions behind them differ.
When the Fed buys a security, the transaction changes both sides of its balance sheet. The asset side gains the security; the liability side generally increases through reserve balances or another settlement balance. When securities mature without reinvestment, assets decline and the related liabilities can also fall, though the exact changes depend on the payments and how they are settled. This accounting connection is useful, but it does not mean that every dollar of Fed assets becomes a dollar of household spending.
How to read the graph
Start with the time span and units, then look at the direction and pace of the line. A rising total means the Fed’s reported assets increased over the period; a falling total means they decreased. A steep move indicates a faster change than a shallow one, but the graph alone cannot explain the cause. Use release notes and the composition data to identify what changed.
- Check the date range. A chart beginning in 2002 tells a different visual story from one that begins in 2020. Long ranges emphasize major expansions and contractions; short ranges reveal month-to-month developments.
- Read the axis carefully. A vertical scale in millions can make ordinary-looking values confusing. Confirm whether the display is in millions, billions, or trillions before quoting a number.
- Distinguish a level from a change. A balance of several trillion dollars is a stock measured at a point in time. It is not the amount the Fed spent during that week or year.
- Look for breaks in the line. Sudden changes can reflect emergency lending, market operations, accounting treatment, or other developments. Check the H.4.1 tables and notes for context rather than guessing from the picture.
It can also help to compare the chart with a second series, such as total liabilities or reserve balances, while keeping in mind that each measures something different. For percentage changes, compare like periods and understand the starting value: a given dollar increase represents a different percentage change when the balance sheet is smaller.
Why the balance sheet expanded and contracted
The balance sheet grew substantially during the 2007–09 financial crisis, when the Fed established lending programs and purchased longer-term securities. It expanded again through subsequent rounds of large-scale asset purchases. Before the global financial crisis, total assets were under $1 trillion; after the crisis-era purchases, the total reached roughly $4.5 trillion by 2014. These rounded figures describe the broad historical scale, not exact observations for a particular day.
From 2017, the Fed began allowing some securities to mature without fully reinvesting the proceeds, a process commonly called balance-sheet normalization or runoff. The total declined for a time, then increased again amid market stress in 2019. In 2020, as the COVID-19 pandemic disrupted economic and financial activity, the Fed cut rates, supported market functioning, and resumed large-scale asset purchases. Its assets reached roughly $8.9 trillion in 2022.
Starting in June 2022, the Fed began reducing its securities holdings by setting monthly limits on how much Treasury and agency mortgage-backed securities would run off. This is often called quantitative tightening, or QT. The graph’s later downward slope reflects the net effect of runoff and other balance-sheet movements. The slope is not a complete measure of monetary policy: the federal funds rate, lending facilities, and the Fed’s communications also matter.
What can move the total besides securities purchases
Securities purchases and maturities are major drivers, but WALCL is a total for the Fed’s assets, not a securities-only measure. Loans to financial institutions, emergency facilities, foreign-currency-related items, and other assets can also change the total. Some facilities are temporary and may rise quickly during a period of stress, then shrink as loans are repaid or programs wind down.
On the liability side, factors such as the Treasury General Account, currency in circulation, and the overnight reverse repurchase facility can affect how reserve balances change. These items do not all appear as assets in WALCL, but they help explain why a decline in total assets does not translate into an identical decline in bank reserves at every moment. To analyze reserves, use a reserve-balance series or the corresponding H.4.1 table instead of treating total assets as a substitute.
There can also be small fluctuations that are not a change in the Fed’s policy stance. Reporting conventions, valuation changes in certain items, and routine movements in other balance-sheet categories can affect weekly observations. A single week is rarely enough to establish a durable trend; compare several observations and check the relevant release details.
What the graph does not tell you
A frequent misconception is that the graph measures “how much money the Fed printed.” The phrase is imprecise. The Fed creates reserve balances electronically when it conducts certain transactions, and physical currency is one liability on its balance sheet. But WALCL measures assets, not the quantity of currency in wallets, the broad money supply, or the total credit available to households and businesses.
Nor is the graph a direct measure of inflation. Inflation depends on a broad set of economic conditions, including demand, supply constraints, wages, expectations, and monetary and fiscal policy. A larger balance sheet may be associated with a particular policy response, but the chart alone cannot establish that balance-sheet growth caused a specific change in consumer prices. Timing, transmission through financial markets, and other conditions need analysis.
Similarly, the balance sheet is not the same thing as U.S. federal government debt. Treasury securities held by the Fed are part of federal debt held by the public in some statistical presentations, but the full federal debt measure includes much more than the Fed’s portfolio. The balance-sheet graph also does not show the Treasury’s annual deficit, the Fed’s net income, or its operating budget.
Compare the total with its components
Use WALCL when the question is, “How large is the Fed’s asset portfolio, and how has the total changed?” Use a component series or H.4.1 table when the question is, “What is the Fed holding?” Treasury securities and agency mortgage-backed securities are especially useful to distinguish because they represent different types of assets and can respond differently to purchases, maturities, and market conditions.
For a focused comparison, choose the same observation dates for the total and the component series, check that the units match, and avoid adding categories that overlap. A component may be reported in millions while a graph is displayed in billions, creating a thousandfold apparent mismatch if the units are overlooked. It is also sensible to compare the same reporting frequency: weekly data should not be casually aligned with a monthly series without noting the conversion or timing choice.
The Fed’s H.4.1 release is the primary source for weekly balance-sheet detail. FRED is convenient for charting, downloading, and comparing time series; the Federal Reserve release is better for checking the original table labels and notes. For a careful explanation, cite both the series and the date of the observation, rather than saying only that the balance sheet is “currently” a particular size.
Using the graph for analysis
The graph is most useful as a starting point. It can show when the Fed’s asset footprint expanded sharply, when runoff began, and how an exceptional episode compares with earlier periods. It cannot on its own tell you whether a policy was effective or whether financial conditions were easy or tight. Those judgments require other evidence, including interest rates, market functioning, credit conditions, and economic data.
For example, a reader comparing 2019 and 2020 might notice that the total rose in both periods. The line alone does not show that the circumstances were the same. In 2019, movements occurred amid money-market pressures; in 2020, the pandemic and market disruption prompted much larger interventions. A reader should pair the chart with the Fed’s statements and H.4.1 component data before drawing conclusions about a particular increase.
If you are preparing a chart for school, work, or research, label the series, units, source, and retrieval date. If you download data, retain the observation dates and do not imply that a weekly Wednesday measure is a daily closing balance. For a long historical comparison, consider whether a nominal-dollar chart answers the question: it does not adjust for inflation or the growth of the economy. A ratio to GDP or an inflation-adjusted presentation may help answer a different question, but it should be labeled as a transformed measure rather than the raw balance-sheet total.
Frequently Asked Questions
What is the best Federal Reserve balance sheet graph?
FRED’s WALCL graph is a convenient starting point for the total asset series. Use the Federal Reserve’s H.4.1 release when you need the original weekly tables and a breakdown of the balance sheet.
How often is the Federal Reserve balance sheet graph updated?
WALCL is based on weekly H.4.1 data and reports a Wednesday-level observation. Check the latest release date on FRED or the Federal Reserve site; do not assume that the displayed value is a real-time reading.
Does a larger Fed balance sheet mean more money was printed?
Not necessarily in the everyday sense of more paper currency. Asset purchases can increase reserve balances, but the total-assets series is not a measure of cash held by the public or of the broad money supply.
What is the difference between the Fed’s balance sheet and the national debt?
The balance sheet records the Fed’s own assets, liabilities, and capital. Federal debt is a separate measure of government borrowing. Treasury securities held by the Fed are one connection between the two, but the measures are not interchangeable.
Why did the Fed’s balance sheet rise in 2020?
The Fed expanded its holdings and used other measures during the pandemic to support market functioning and economic conditions. The graph shows the increase in total assets; H.4.1 tables and policy statements explain the categories and actions behind it.
Does the graph predict inflation?
No. It records a balance-sheet total, not a forecast. Inflation has multiple causes, so the graph should be considered alongside price data, economic conditions, and other policy measures.
Related
- Daily Employee Schedule Template Excel: Setup & Tips
- Daily Schedule Excel Template: Plan Your Day in Excel
- Daily Cash Flow Template Excel: How to Build and Use It
Try it: the Percentage Formula Generator: percent of, percent change, increase and decrease, with the formula.
More in Charts & pivot tables
- Stylish Doughnut Chart in Excel: Design Tips & StepsTo make a stylish doughnut chart in Excel for Microsoft 365 on Windows, select a clean category-and-value table,…
- Excel Pivot Table Filter Not Working? Fixes That HelpIf an Excel PivotTable filter is not working, first refresh the PivotTable and check that its source data…
- Creating an Org Chart in PowerPoint: Steps and TipsTo create an org chart in PowerPoint for Microsoft 365 on Windows, choose Insert > SmartArt > Hierarchy,…
- How to Make a Large Org Chart in PowerPointTo make a large org chart in PowerPoint, first organize the reporting structure, then use Insert > SmartArt…
- Pivot Table Value Filter Not Working? Fix It in ExcelIf a PivotTable value filter is not working, first confirm that you applied it to a field in…
- Pivot Chart: Group Dates by Month in ExcelYes. In Excel for Microsoft 365 on Windows, group dates for a PivotChart through its underlying PivotTable: right-click…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.