PowerPoint Slideshow: How to Loop It Automatically

How-to basics · Updated November 21, 2026

Yes. In PowerPoint for Microsoft 365 on Windows, go to Slide Show > Set Up Slide Show, select Loop continuously until ‘Esc’, and choose OK. For the slideshow to advance on its own as well as repeat, give the slides timings and start the show; otherwise, it will generally wait for someone to advance slides before looping back at the end.

What looping does—and what it does not do

Looping tells PowerPoint what to do after it reaches the final slide: return to the first slide and continue, rather than stop. It is a playback setting, not an animation or a special slide type. It does not, by itself, decide how long a slide stays on screen. That is controlled by slide-advance settings, such as recorded timings or the After option on the Transitions tab.

This distinction matters for a display in a lobby, shop, classroom, or conference booth. A presentation can be set to loop but still require a person to click through it. Conversely, a presentation can advance automatically through its slides but stop when it reaches the end if looping is turned off. An unattended display needs both behaviors: automatic advancement and a repeating show.

PowerPoint also offers a kiosk-style show for unattended playback. That is useful when viewers should not click around or change the order. For a presentation led by a speaker, the standard full-screen show is usually more appropriate, even if it is set to repeat.

Turn on the loop setting in PowerPoint for Windows

  1. Open the presentation and select the Slide Show tab.
  2. Select Set Up Slide Show in the Set Up group.
  3. In the Set Up Show dialog, select Loop continuously until ‘Esc’.
  4. Choose the show type that suits the situation. Presented by a speaker (full screen) is the normal choice when someone may control the presentation. Browsed at a kiosk (full screen) is intended for an unattended display.
  5. Select OK, save the file, and run the show to check the result.

To start from the first slide on Windows, press F5 or choose Slide Show > From Beginning. To start from the slide currently selected in the editing window, use Shift+F5 or From Current Slide. Press Esc to exit a running show. The loop option does not mean the show runs forever after it has been closed; Esc still ends playback.

Set slide timings for hands-free playback

For slides to advance automatically, set an advance time. Select a slide, open the Transitions tab, and find the Timing group. Under Advance Slide, select After and enter the number of seconds. Repeat for the other slides, or choose Apply To All if they should all remain on screen for the same duration. The Duration box controls how long the transition effect takes; it is not the same as how long the slide waits before advancing.

For example, a simple information screen might stay up for 12 seconds, while a slide with a longer list might need 25 seconds. Use a time that allows viewers to read the content comfortably. If On Mouse Click is also selected, a click can advance the show before the timer expires. Clear that option when the display must move only according to its timings.

PowerPoint can also use timings created while rehearsing. On the Slide Show tab, choose Rehearse Timings, present the slides at a natural pace, and save the timings when prompted. This is helpful when each slide needs a different viewing time. Check the saved timing for every slide before relying on the show unattended: a missing or very short timing can make playback pause or move on too quickly, depending on the show setup.

Choose a show type for an unattended screen

The Set Up Show dialog offers different ways to present the same deck. The standard speaker-led mode is designed for a presenter and can be controlled with clicks or keyboard input. A kiosk show is full screen and is intended to run without a presenter. In kiosk mode, viewers normally cannot advance slides by clicking them, so timings are essential. If a slide has no usable timing, the show may appear to get stuck there.

For an unattended loop, use kiosk mode when the audience should simply watch the sequence. Set the slide timings first, enable the loop, and test the presentation from beginning to end. If viewers need to click links, choose options, or move between sections, a kiosk show may not fit: use a presenter-controlled show or create a more suitable interactive arrangement instead.

Looping is not a substitute for device settings. A computer that sleeps, locks, loses power, or turns off its display can interrupt playback even when PowerPoint is configured correctly. For a public screen, check the computer’s power and display-sleep settings, notifications, and connection to the screen. Those settings are managed by Windows or the device administrator, not by the slideshow loop checkbox.

PowerPoint on Mac and other ways to start the show

In PowerPoint for Mac, the corresponding setup is generally available from Slide Show > Set Up Show; select Loop continuously until ‘Esc’ in the dialog. Slide timings are configured from the Transitions tab using the advance-after controls. Ribbon names and layout can differ slightly between Mac releases, so if a control is not where expected, look in the Slide Show setup dialog and the transition timing controls rather than assuming the Windows screen layout is identical.

After setting the loop, start the presentation from the first slide using the Slide Show controls. Confirm that the final slide returns to the first one and that the slide timings behave as intended. Keyboard shortcuts can differ by Mac keyboard and PowerPoint version; using the ribbon command is a straightforward alternative when a shortcut does not work.

PowerPoint for the web and different desktop editions may not expose every control in the same place or support every playback workflow in the same way. If the file is meant to run on a particular computer, configure and test it in the PowerPoint version that will actually play it. Do not assume that a setting used in one application or device will behave identically in another.

Save and share a looping presentation

A normal PowerPoint presentation file (.pptx) can retain the slideshow setup and timings. If you want the file to open directly into slideshow mode when opened in the desktop PowerPoint application, save a copy as a PowerPoint Show (.ppsx) using File > Save As and selecting the PowerPoint Show format. A .ppsx file is a convenient launch format, but changing the file extension or saving as .ppsx does not itself switch on looping. Keep the loop and timing settings configured in the presentation.

When sharing a deck, test the exact copy that the recipient will use. For example, a file attached to an email, copied to a USB drive, or uploaded to a shared folder might not be the latest version. A useful handoff includes a brief note that the show is designed to run full screen and that Esc exits it. If the recipient will use a different computer, allow time to test fonts, media, display proportions, and playback there.

Exporting a presentation as a video is another option when viewers should not interact with the slides. A video can be set to repeat by the software or device playing it, but that is a player setting, not PowerPoint’s slideshow loop setting. Video export also changes the workflow: viewers cannot use PowerPoint links or advance slides themselves, and the export must be checked for correct timing and media playback.

Audio, video, and other content in a loop

Slide timings and the loop setting govern the slide sequence; media may have its own playback options. For background music, select the audio object and use the audio playback controls, including Play in Background where available. PowerPoint’s audio options can include playing across slides and looping the audio until stopped. Configure those separately from the slideshow loop, then watch a complete cycle to check whether the sound restarts, continues, or ends as intended.

Embedded video also needs a separate check. Depending on its playback settings, it may start automatically, wait for a click, or stop when it finishes. If a video runs longer than the slide’s advance time, PowerPoint may leave the slide before the clip finishes. Set the slide duration long enough for the clip, and test the transition from that slide to the next. Avoid assuming that looping the presentation automatically makes every audio or video item loop seamlessly.

Common looping problems and fixes

  • The show stops on the last slide: Open Slide Show > Set Up Slide Show and verify that Loop continuously until ‘Esc’ is selected. Save the presentation after making the change.
  • The slides do not move on their own: Add timings on the Transitions tab or use Rehearse Timings. The loop setting controls what happens after the last slide; it does not create automatic advance times.
  • The show waits at one slide: Check whether that slide has an advance-after time and whether the show is in kiosk mode. Also inspect hidden slides and any custom show settings that might alter the sequence.
  • A slide advances too quickly: Increase its After time. Check that you have not confused the transition’s Duration with the slide’s waiting time.
  • A click skips ahead: Clear On Mouse Click for slides that should advance only on a timer, or use kiosk mode if viewers should not control navigation.
  • The display goes dark: Check the computer’s sleep, screen, and power settings. PowerPoint cannot keep a monitor awake if the operating system turns it off.

A full-cycle test catches many issues that a quick glance misses. Start at the beginning, leave the show running through the last slide and back to the first, and listen for audio or watch for video that ends at the wrong time. Test again after edits, because changing slide content or timing can affect playback even if the loop checkbox remains selected.

Frequently Asked Questions

Does PowerPoint loop automatically without timings?
It can return to the first slide after someone advances through the deck, but it will not necessarily advance slides hands-free. Set slide timings if the presentation must run unattended.

How do I stop a PowerPoint slideshow that is looping?
Press Esc while the slideshow is running. The loop setting means repeat until Esc; it is not an instruction to ignore the exit key.

Does saving as a .ppsx file make a slideshow loop?
No. The .ppsx format opens the file as a show in desktop PowerPoint, but looping and automatic advancement are separate settings. Configure them in the presentation and test the .ppsx copy.

Can I loop only one slide?
A normal presentation loop repeats the show’s sequence rather than creating a special single-slide loop. For a one-slide display, set that slide’s advance timing and enable looping, then test the result in the PowerPoint version being used.

Will a PowerPoint loop continue when the computer sleeps?
No. Sleep or display power settings can interrupt playback. Adjust those settings on the computer, subject to any workplace or device policies, and test the screen for as long as it needs to run.

Can I make background music repeat with the slides?
Yes, if the audio playback options are set accordingly. Configure audio to play across slides and loop until stopped where those options are available, then test it with the slide timings; the slideshow loop alone does not control audio repetition.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.