PowerPoint Slideshow Loop: Set It Up to Repeat Automatically

How-to basics · Updated November 21, 2026

To make a PowerPoint slideshow repeat, open the deck in the desktop app, choose Slide Show > Set Up Slide Show, and select Loop continuously until Esc. For hands-free playback, also give each slide a duration under Transitions > Advance Slide > After. Start the show to check that it advances and returns to the first slide as intended.

A loop is useful for a lobby display, trade-show screen, classroom rotation, or any presentation that should keep playing without someone restarting it. Before setting it up, decide whether viewers should be able to click through the slides, whether the show should advance by itself, and how you will exit it. The instructions below use PowerPoint for Microsoft 365 on Windows; the Mac route is similar, with a few interface differences noted.

What You’ll Need

  • A PowerPoint presentation saved on the computer or in a location you can access.
  • The desktop version of PowerPoint for the full setup options. PowerPoint for the web can play a presentation, but some show setup features and controls may differ.
  • If the loop needs to run unattended, slide timings and a reliable power source for the computer or display.
  • A few minutes to test the presentation in Slide Show view, ideally on the screen or equipment you plan to use.

Step-by-Step

  1. Open and prepare the presentation. Open the deck in PowerPoint and check the slide order, text, links, audio, and video. Remove any blank or placeholder slides that should not appear. Save a working copy before changing timings, especially if you need to preserve a version intended for a live presenter. Looping controls the show’s behavior; it does not repair missing media or incomplete content.

  2. Open the show setup dialog. On Windows, select the Slide Show tab, then choose Set Up Slide Show in the Set Up group. In PowerPoint for Mac, use Slide Show > Set Up Show; depending on the release, the command may appear on the Slide Show ribbon. The dialog contains the playback and slide-advance options for the presentation.

  3. Choose how viewers can interact. In the Set Up Show dialog, select Presented by a speaker (full screen) if you want a normal full-screen presentation where a person can advance slides. Choose Browsed by an individual (window) if the show should appear in a window. For a public, unattended display, choose Browsed at a kiosk (full screen). Kiosk mode is designed for continuous, hands-off playback and limits ordinary navigation; test any hyperlinks or action buttons you rely on.

  4. Turn on continuous looping. In the dialog’s Show options area, select Loop continuously until Esc. In some versions, kiosk mode selects or requires continuous looping automatically, so check the setting rather than assuming. Click OK to apply the choice. Esc exits a running slideshow; if the computer is unattended, make sure the person responsible for the display knows how to stop it.

  5. Decide how the slides will advance. A loop setting alone does not create slide timings. In the Set Up Show dialog, find Advance slides. Choose Using timings, if present when the show should progress according to timings already assigned to slides. Choose Manually when a presenter will advance it. For an unattended loop, use timings and confirm that every slide has a suitable duration; otherwise, the presentation may wait for a click instead of moving on.

  6. Set a duration for each slide if the show is automatic. Close the setup dialog if needed, select a slide in the thumbnail pane, and open the Transitions tab. In the Timing group, under Advance Slide, select After and enter the time that slide should remain visible. For example, a brief title card might stay on screen for five seconds, while a slide with several points may need fifteen seconds or more. Select Apply To All only if the same duration works for every slide. Otherwise, set the timing individually for slides that need different reading time. If using automatic playback, clear On Mouse Click where necessary so an accidental click is not required for progression.

  7. Use rehearsed timings when the pace needs to feel natural. If slide durations vary, go to Slide Show > Rehearse Timings and advance through the deck at the pace a viewer needs. PowerPoint records the time spent on each slide. At the end, accept the recorded timings if prompted. Review the resulting durations, since pauses while rehearsing can make a slide stay up longer than you intended. Then ensure the show is set to use timings, if present.

  8. Run the slideshow from the beginning. On Windows, select Slide Show > From Beginning, or use F5. On a Mac, use the Slide Show menu or ribbon to start from the beginning; shortcut assignments can differ by keyboard and PowerPoint release. Watch through the final slide and confirm the first slide appears again. Check that slides advance without clicks, the timings are comfortable, and audio or video behaves as expected.

  9. Save and prepare the display. Save the presentation after changing its setup and timings. For repeated playback on a dedicated screen, connect the computer to the display, select the correct screen in the operating system, and run the presentation in Slide Show view. Prevent sleep or screen locking for the length of the display session, and keep the computer plugged in. If you plan to share a PowerPoint Show file, save it as a .ppsx only after testing the loop; opening a show file starts the slideshow more directly, but it still needs to be tested on the target computer.

Common Mistakes

  • Turning on loop but not setting timings. The show can reach a slide and wait there if it has no timing and is set to use timings. Add a duration to every slide that must advance on its own.
  • Choosing manual advance for an unattended screen. With manual advance, the presentation waits for a click or key press. Use slide timings for automatic movement.
  • Applying one timing to every slide without checking readability. A short duration may work for a title but be too fast for a chart or paragraph. Review each slide at full-screen size.
  • Assuming loop means automatic start. Looping repeats the deck after it reaches the end; it does not necessarily launch PowerPoint or start the show when the computer turns on.
  • Testing only in editing view. The loop setting takes effect during Slide Show playback. Always run the deck in slideshow mode before relying on it.
  • Forgetting how to exit. Continuous playback can surprise someone trying to close the show. Tell the operator to press Esc, and consider whether kiosk mode is appropriate for the location.

Tips

  • Keep slide content readable from a distance. A repeating display is often viewed casually, so use concise wording, strong contrast, and large text. Give viewers enough time to absorb each slide without needing to wait through an unnecessarily long cycle.
  • Make the transition back to slide one feel intentional. The last slide should not look like a conclusion if the presentation is meant to continue. A closing message such as a short welcome or contact slide can lead naturally back to the opening slide.
  • Test on the actual display. A slide that looks clear on a laptop may be hard to read across a room. Check aspect ratio, screen edges, sound level, and video playback in the place where the loop will run.
  • Use kiosk mode for a true unattended station. It is more restrictive than a standard presentation and can reduce accidental navigation. If you need viewers to choose topics or follow links, test those interactions carefully before putting the display in public.
  • Keep a presenter-friendly copy. A live version may need click-to-advance behavior, while an unattended version needs timings and looping. Saving separate copies helps avoid changing the wrong playback setup before a meeting.
  • Plan for interruptions. Disable sleep and notifications where appropriate, check that the computer has enough power, and make sure a video or sound file is available on the presentation device. If the display is important, keep a backup copy accessible.

Troubleshooting

The show stops at the last slide. Reopen Slide Show > Set Up Slide Show and confirm that Loop continuously until Esc is selected. Save, start from the beginning, and test the final transition again. If a particular slide appears to hold the show, check whether it has a timing and whether the show is set to use timings.

The slides do not advance automatically. Open the affected slide, go to Transitions, and confirm that After is selected with a duration entered. Check more than one slide: a missing timing can cause an unattended show to pause. Also check the Advance slides choice in Set Up Show. If it is set to Manually, change it to Using timings, if present for automatic playback.

The slides move too quickly or too slowly. Adjust the After time for the specific slides that need a change. If you used Rehearse Timings, inspect the recorded duration on each slide; a long pause during rehearsal may have been saved. Run the entire deck again rather than judging timing from the editing screen.

The slideshow exits unexpectedly or will not stop. The loop should continue until Esc, so check whether someone pressed Esc or whether the computer or PowerPoint was interrupted. To stop a normal full-screen show, press Esc. In kiosk mode, ordinary keyboard and mouse navigation is restricted by design; use Esc to leave the slideshow and confirm that the display operator can access the keyboard.

Media is missing or behaves differently on another computer. Test the deck on the computer that will run it. Confirm that linked media files are accessible, that any required fonts are available, and that sound is not muted. If necessary, embed or copy media according to PowerPoint’s options and retest. Do not assume that a video or audio clip will loop along with the slides: its own playback settings may need to be configured separately.

Frequently Asked Questions

Does a PowerPoint loop restart automatically after the last slide?
Yes, when Loop continuously until Esc is enabled, playback returns to the first slide after the last one. The slideshow must already be running, and automatic slide timings are needed if no one will advance it.

Can I make the slideshow loop without clicking?
Yes. Set a duration using Transitions > Advance Slide > After for each slide, then choose Using timings, if present in Set Up Show. Use kiosk mode if the presentation is meant to run unattended with limited navigation.

Will the loop begin as soon as I open the PowerPoint file?
Not necessarily. The loop setting controls what happens during slideshow playback, not when PowerPoint launches. Start the show manually or use a separately configured presentation or computer startup process if automatic launch is required.

Can I loop only one slide?
A presentation with one slide can repeat, but a normal slideshow does not have to restart to keep that single slide visible. Set its timing if it should advance or repeat as part of a playback workflow. For a video or animated element, configure that media’s own loop behavior separately.

Does this work in PowerPoint for Mac?
The main settings are available in desktop PowerPoint for Mac, generally through Slide Show > Set Up Show and the Transitions controls. Ribbon labels and keyboard shortcuts can vary by version, so use the menu paths and verify playback on the Mac that will run the presentation.

Will saving as a video preserve the loop setting?
No. A video file is played by a media player, and whether it repeats depends on that player or the screen’s playback software. Configure and test looping in the player separately if you export the slides as a video.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.