How to Make a Poster Presentation in PowerPoint: Steps

How-to basics · Updated November 21, 2026

To make a poster presentation in PowerPoint, create a blank slide, set it to the required printed dimensions, arrange your research into a clear visual sequence, then export and inspect a PDF. Check the event’s size, orientation, and submission rules first; building the slide at its final dimensions makes the design easier to judge and helps prevent printing surprises.

What You’ll Need

  • Microsoft PowerPoint for Microsoft 365 on Windows. The instructions also note where the Mac menus differ.
  • The poster’s required width, height, orientation, and file format. Ask the event organizer or print service if these are not specified.
  • Your final text, figures, images, references, and any required logos or acknowledgments.
  • A clear outline of the main message and the order in which readers should encounter the sections.
  • Access to a printer or print service for a final-size check, if possible. A PDF viewer is useful for checking the exported file.

Step-by-Step

  1. Confirm the poster requirements. Find out the exact finished dimensions, whether the poster must be portrait or landscape, and whether the organizer requires a PDF, a specific color mode, or a particular margin. Do not assume that a common size such as 36 by 48 inches will be accepted. Also check requirements for logos, funding statements, citations, and accessibility. Write the width and height down before opening PowerPoint so you can set the slide correctly at the start.
  2. Plan the story before designing. Decide what a reader should understand after looking at the poster for a few seconds. Write that takeaway in one sentence. Then group the supporting information into a small number of sections, such as background, question, method, results, and conclusion. Choose the evidence that supports the takeaway; a poster is not a full paper pasted onto a large page. If the event has a template, use it rather than starting from a blank slide.
  3. Set the slide to the final size. In PowerPoint for Windows, open Design > Slide Size > Custom Slide Size. Enter the required width and height, choose Portrait or Landscape, and select OK. If PowerPoint asks how to scale existing content, choose Ensure Fit when you need to preserve all content; for a new blank slide, there is nothing to scale. On Mac, open the Design tab and use Slide Size or Page Setup to enter custom dimensions; labels can vary by release. Confirm the measurements shown in the dialog, especially if your computer uses different measurement units.
  4. Build a simple layout grid. Decide where the title, author details, main sections, figures, and conclusion will go before filling every space. Use two or three columns for most posters, with clear gaps between them, and align the edges of text boxes and figures. Leave a consistent outer margin so content is not clipped when printed. You can add temporary guides or use PowerPoint’s alignment tools: select objects, then use Shape Format > Align. Keep the reading order obvious, for example from left to right and then down.
  5. Add a clear title and useful section headings. Make the title specific enough to explain the subject without requiring the reader to decode an abbreviation. Put author names, affiliations, and contact information directly below it if required. Give each section a short heading that helps someone scan the poster. Use a consistent hierarchy: title largest, section headings next, body text smaller. Avoid using several unrelated fonts or making every heading a different color; consistency helps readers identify what belongs together.
  6. Write concise copy at a readable size. Replace long paragraphs with short blocks, labels, or bullets where they fit the subject. Keep essential context, methods, and limitations, but remove repetition and details better suited to a paper or handout. Set type while viewing the slide at its actual page proportions, not only zoomed in. There is no single font size that works for every poster size and viewing distance, so check the event’s guidance and print a sample. Body text should remain comfortable to read at the intended distance; do not shrink it just to make crowded text fit.
  7. Insert figures and images carefully. Use charts, diagrams, and photographs that directly support the main result. In PowerPoint, use Insert > Pictures to add image files, and use Insert > Chart for editable charts. Keep image proportions when resizing by dragging a corner handle, and avoid enlarging a small, low-resolution image until it looks blurry. Label axes, define abbreviations, and add a short caption where a figure’s meaning is not self-evident. Ensure you have permission to use images and that charts remain legible when printed.
  8. Use color and contrast with restraint. Choose a small palette and use it consistently to distinguish headings, categories, or important findings. Use dark text on a light background, or another high-contrast combination, and do not rely on color alone to communicate a distinction. For example, label chart series directly or use different marker shapes as well as colors. Check that links and small text are visible, and consider how the design will look to readers with color-vision differences. A pale background can print unevenly or use more ink, so a mostly light page is often practical.
  9. Review the slide at several scales. Zoom out to see whether the main takeaway and reading order are apparent, then zoom in to check labels, footnotes, and alignment. Read every line for spelling, units, names, and citation accuracy. Confirm that figures have not been stretched and that text boxes do not hide content. Ask someone unfamiliar with the project to scan it and explain the main result; if they cannot find it quickly, improve the hierarchy or reduce competing detail. For accessibility, add meaningful alternative text to informative images where appropriate using the picture’s Alt Text options.
  10. Export and verify a print-ready file. Save the editable presentation first. On Windows, use File > Save As and select PDF as the file type, or use File > Export and choose the PDF option. On Mac, use File > Export and select PDF. Open the PDF and confirm the page size, orientation, font appearance, image quality, and page count. If the printer requests a particular PDF setting, follow its instructions. Send the PDF rather than the PowerPoint file unless the organizer or printer specifically asks for the editable slide.

Common Mistakes

  • Designing at the wrong dimensions: Changing the slide size at the end can shift text and images or force you to scale content. Confirm the required size before laying out the poster.
  • Fitting in too much: Dense paragraphs and tiny labels discourage readers. Keep the core evidence and remove background material that does not help explain the result.
  • Using text that only looks readable on screen: A large monitor can make small type seem fine. Review at the poster’s proportions and print a section at actual size if possible.
  • Stretching images or charts: Pulling a side handle can distort a picture. Resize from a corner and check the result; replace low-resolution graphics rather than enlarging them excessively.
  • Leaving no print margin: Some printers trim edges or cannot print to the paper’s edge. Keep important text and logos away from the outer boundary, and confirm safe margins with the print service.
  • Exporting without checking the PDF: Missing fonts, awkward line breaks, or clipped items may not be obvious in the editable slide. Inspect the actual file you plan to submit.

Tips

  • Make the key result visually prominent, but do not let decorative elements compete with it. A reader should be able to identify the topic and main finding before reading every section.
  • Use alignment and spacing to create structure instead of drawing boxes around every paragraph. Consistent column widths and gaps can make a simple layout feel organized.
  • Use descriptive chart titles and direct labels where possible. Readers should not have to search between a legend and the graph to identify each series.
  • Keep a backup copy of the original presentation before making major layout changes. Save versions as you work so you can return to an earlier design if needed.
  • Ask the print service how it handles scaling. If it must resize the poster, check that the change will not make text too small or alter the requested dimensions.
  • Bring a short verbal explanation of the poster’s main point. The poster supports your presentation; it should not have to contain every detail you might discuss.

Troubleshooting

PowerPoint will not accept the dimensions. Check that you entered width and height in the correct fields and that the units match the required size. PowerPoint has maximum slide dimensions; if the requested poster exceeds them, ask the printer whether it accepts a scaled slide and can print it at the intended size. Do not guess at a scale factor—confirm it with the print service and verify the PDF page size.

Changing the slide size rearranged the content. Undo immediately if possible, or return to the earlier saved copy. Set the correct dimensions first, then adjust text boxes and images individually. PowerPoint’s scaling choice cannot guarantee that every element will land in the right place.

The PDF looks different from the slide. Reopen the PDF in a separate viewer and look for substituted fonts, missing images, text wrapping, or clipped objects. If a font is unavailable on another computer, choose a commonly available font or follow the organizer’s instructions for font embedding. Export again after correcting the source slide, rather than trying to repair the PDF by hand.

The printer says the file is blurry or the page is the wrong size. Check the PDF’s page dimensions and use original, higher-resolution image files. Avoid screenshots of charts when you can insert the chart or export a clean graphic. Ask the printer whether it needs a different PDF preset, bleed, or color specification; those requirements vary by service.

The poster is hard to read from a distance. Increase the type size for the title, headings, and essential labels, and remove lower-priority copy to make room. Check contrast and print a representative section at actual size. If only a small part is difficult to read, fix that element rather than shrinking the whole poster to fit more content.

Frequently Asked Questions

Should I use a PowerPoint poster template?
A template can save time and help with a required institutional style. Check that its dimensions match the event’s specifications, and remove sample text and graphics before exporting. If no template is required, a blank slide gives you more control over the layout.

What size should a PowerPoint poster be?
Use the dimensions specified by the conference, school, or print service. There is no universal poster size. Confirm both width and height, orientation, and any maximum slide-size limits before designing.

Can I make a poster in PowerPoint with multiple slides?
For a conventional printed research poster, use one slide set to the full poster dimensions. Multiple slides create separate pages rather than one continuous poster. Use multiple slides only if you are making a digital presentation or the organizer explicitly requests them.

Should I send the PowerPoint file or a PDF?
PDF is usually the safer print or submission format because it preserves the page layout across computers. Keep the PowerPoint file as your editable source, and provide it only when requested.

How do I check whether the text is large enough?
Follow the event’s font-size guidance, then view a printed sample at actual size or ask someone to read it from the expected viewing distance. Zooming in on a laptop is not a reliable substitute for checking the physical poster.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.