How to Insert a Page Break in Word for Windows and Mac

How-to basics · Updated November 21, 2026

To start a new page in Word, place the cursor where the next page should begin and press Ctrl+Enter on Windows or Command+Return on a Mac. You can also choose Insert > Page Break from the ribbon. A page break moves the text after the cursor onto a new page; it is a layout control, not a printed line. The steps below explain how to insert one, see its marker, and remove it if needed.

What You’ll Need

  • A document open in Microsoft Word. These instructions focus on Word for Microsoft 365 on Windows; Mac differences are noted where they matter.
  • Editing access to the document. If it is read-only or protected, you may need permission to make changes.
  • A general idea of where the new page should start. You can insert a break before a heading, paragraph, image, or other content.

Step-by-Step

  1. Open the document and locate the intended break. Scroll to the place where you want the new page to begin. A page break splits the document at the insertion point: content before it stays where it is, while content after it moves to the next page. If you want a chapter or section heading to begin a page, put the cursor immediately before that heading, not at the end of the preceding paragraph.
  2. Put the cursor at the exact insertion point. Click before the first character of the text that should start on the new page. You can also click at the end of the previous paragraph and press Enter once if needed to create a new paragraph, then insert the break there. Avoid selecting a whole paragraph or a range of text; the break is inserted at the cursor and does not require a selection.
  3. Insert the break with the keyboard shortcut. In Word for Windows, press Ctrl+Enter. In Word for Mac, press Command+Return. Word immediately starts a new page at that point. The shortcut is usually the quickest method, and it inserts a manual page break rather than adding blank paragraphs to push text down.
  4. Or use the ribbon command. In Word for Microsoft 365 on Windows, select the Insert tab, then choose Page Break in the Pages group. Depending on the ribbon layout or window width, the Pages commands may be displayed as a compact button or menu. On Word for Mac, choose Insert > Page Break from the menu or use the Page Break command on the Insert tab if it appears in your ribbon layout. Both methods insert the break at the current cursor position.
  5. Check where the content moved. The text after the insertion point should now begin at the top of the following page, subject to the document’s margins and any content that comes before it. If you inserted the break before a heading, that heading should be the first item on the new page. If the text seems to jump farther than expected, look for other page breaks, section breaks, or formatting that is also affecting pagination.
  6. Show formatting marks if you want to inspect the break. On Windows, press Ctrl+Shift+8; on Mac, press Command+8. You can also use the paragraph-mark button, shown as ¶, on the Home tab. Word displays nonprinting formatting marks, including a labeled Page Break marker. This marker helps you confirm that the break is in the right place. It is an editing aid and will not appear on a normal printed page or in a standard PDF export.
  7. Hide the marks when you are finished. Press the same shortcut again, or click ¶ on the Home tab. Hiding marks does not remove the break; it only changes what Word displays on screen. Save the document with Ctrl+S on Windows or Command+S on Mac so the new pagination is retained.

For example, if a report has a heading called Results that must start on its own page, click directly before the R in Results and insert a page break. The heading and its following content move to the next page, while the preceding section remains before the break. If you instead click after the heading and insert the break there, the heading will stay behind and the material below it will start on the new page.

Common Mistakes

  • Using repeated Enter presses to force a new page. Several empty paragraphs can appear to push text down, but their effect changes when earlier content is edited, a font changes, or margins are adjusted. Use a page break for a deliberate page start. Blank lines are appropriate for spacing within a page, not for controlling pagination.
  • Putting the cursor in the wrong place. If a heading ends up on the previous page while its paragraph starts on the next, the break was probably inserted after the heading instead of before it. Undo with Ctrl+Z on Windows or Command+Z on Mac, reposition the cursor, and insert the break again.
  • Confusing a page break with a section break. A page break starts a new page but keeps the same section formatting. It does not, by itself, create a new header, footer, page-number scheme, or page orientation. Use a section break when the following pages need different section-level settings.
  • Expecting to see a line on the printed page. The words Page Break or the dotted marker are visible only when formatting marks are displayed. They are not a decorative rule and do not print. If you need a visible horizontal line in the document, insert a line or use a paragraph border instead.
  • Deleting nearby text while trying to remove a break. A page break is a formatting character. Turn on ¶ marks so you can identify it, then select the break marker itself and delete it. Check the surrounding paragraphs afterward because removing a break joins the content back into the normal page flow.

Tips

  • Use breaks for intentional page starts. Page breaks are useful before a new chapter, an appendix, a title page, or a standalone table. They tell Word where a page should start even if text above the break later grows or shrinks.
  • Use heading settings for repeating structure. If every chapter heading should start on a new page, Word’s paragraph pagination settings may be more convenient than inserting a break manually before each heading. Select the heading, open the Paragraph dialog from the Home tab, choose the Line and Page Breaks tab, and select Page break before. The setting applies to that paragraph style or selection, so confirm the result on the pages that follow.
  • Turn on paragraph marks while diagnosing layout. The ¶ display can reveal extra empty paragraphs, page breaks, and section breaks that are otherwise hard to spot. Turn it off again when the extra symbols make normal editing harder.
  • Keep section formatting in mind. If the next page needs a different header, footer, orientation, or numbering, use Layout > Breaks and select the appropriate section break, such as Next Page. The exact choices can vary with the Word version and platform. A regular Page Break is the simpler choice when all page settings should remain the same.
  • Review the document in Print Layout. This view makes page boundaries and the effect of a manual break easier to understand. If the document looks different in another view, switch to View > Print Layout before adjusting the break.

Troubleshooting

The shortcut does nothing. First click inside the document body so Word has an active insertion point, then try Ctrl+Enter on Windows or Command+Return on Mac. If the cursor is inside a table cell, the shortcut may behave differently or may not insert the break where expected. Click in the paragraph before or after the table and use the Insert tab command. If the document is protected, shared with restricted editing, or open in a view-only state, switch to an editable copy or ask the document owner for access.

The next page is still blank or the text jumps two pages. Turn on formatting marks and inspect the area around the jump. There may be two manual page breaks, a section break, or several empty paragraphs in addition to the break you just added. Remove only the unwanted marker, then check whether a large image, table, or paragraph setting is forcing content onto another page. A paragraph with Keep with next or Page break before enabled can also move text unexpectedly; inspect the paragraph’s Line and Page Breaks settings if no extra break is visible.

The break marker is missing. It may simply be hidden. Toggle ¶ on the Home tab, or use Ctrl+Shift+8 on Windows and Command+8 on Mac. Also confirm that the cursor is in the document and that you are viewing the page in Print Layout or Draft. Remember that the marker is a nonprinting character, so its absence from a printed page or PDF is normal.

The page break appears to be inside a table. Word handles page breaks in tables differently from breaks between ordinary paragraphs. If you need the material after a table to start on a new page, place the cursor in a paragraph after the table and insert the break there. If there is no paragraph after the table, click at the end of the final table cell and use the arrow keys to move to the paragraph following it, where possible. Avoid inserting a break in the middle of a cell unless you specifically want the cell’s content to continue on another page.

The heading moves but the following content does not look right. Check whether the heading or body paragraph has Keep with next, Keep lines together, or Page break before enabled. These settings can work alongside a manual break and alter the resulting layout. Review them in the Paragraph dialog rather than adding more empty lines. If the issue began after editing, undo once to see whether the change was the cause, then reinsert the break at the intended point.

Frequently Asked Questions

Does a page break add a blank page?

Not necessarily. It moves the content after the cursor to the next page. A blank page can result if the break is inserted before content that already starts on a new page, or if other breaks and formatting push the text onward. Show formatting marks to inspect the area.

Will a page break print?

No. The break is a layout instruction, and its marker is a nonprinting formatting symbol. The content is printed on the pages Word lays out, but the words or dotted line used to identify the break do not print.

How do I delete a page break?

Turn on formatting marks, click just before the Page Break marker, and press Delete. Alternatively, click just after it and press Backspace. On a Mac, use the Delete key to remove the character before the cursor or Fn+Delete to remove the character after it, depending on your keyboard. Check the text afterward because it will flow together again.

What is the difference between a page break and a section break?

A page break starts a new page while keeping the document in the same section. A section break divides the document into sections so you can apply different headers, footers, page numbering, columns, or page orientation. Choose a section break only when you need those settings to change.

Can I insert a page break in Word for the web?

Yes. Open the document in editing mode, place the cursor where the new page should start, and use Ctrl+Enter on Windows or Command+Return on Mac. You can also look for Page Break on the Insert tab. The web layout may display pagination differently from the desktop app, so check the document in Print Layout or open it in desktop Word if precise page placement matters.

Why does the break move when I edit earlier text?

A manual break stays at its position in the text, but the amount of material before it can change page flow. If edits add enough content, Word may place the break on a later physical page. That is expected: the break sets a new-page boundary after its location in the document, not a permanent page number.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.