To add a horizontal line between rows in a Word table, click inside the table, select the table or the rows you want to format, then choose Table Design > Borders > Inside Horizontal Border. This applies a border between the selected rows; it does not add a new row or place a line of text in the document. The steps below are for Word for Microsoft 365 on Windows, with Mac notes where the interface differs.
What You’ll Need
- A document containing a Word table. If the information is currently separated by spaces or tabs, convert it to a table first using Insert > Table, or select the text and use Insert > Table > Convert Text to Table.
- Permission to edit the document. If it is read-only or protected, you may need an editable copy or the document owner’s permission to change its formatting.
You do not need to install an add-in or draw the line by hand. A table border is usually the best choice because it stays attached to the cells when text moves, the table changes size, or the document is printed.
Step-by-Step
- Click inside the table. Put the insertion point in any cell of the table where you want the line. Word should display the contextual Table Design and Table Layout tabs on the ribbon. If you do not see them, click in a table cell rather than in the paragraph above or below the table. In some versions, the design tab is labeled Table Design and the layout tab may appear as Layout under Table Tools.
- Choose whether to format the whole table or just part of it. To put a line between every row, leave the cursor in the table and select the whole table. On Windows, open Table Layout > Select > Select Table. To add a line only in one section, select the relevant adjacent rows instead: open Table Layout > Select > Select Row for one row, or drag across the rows you need. Make sure the selection covers the cells on both sides of the boundary where you want a border.
- Open the table border options. Select Table Design on the ribbon, then find the Borders button, usually in the Borders group. Click its drop-down arrow to see the available borders. If the ribbon is narrow, the group or button may be collapsed; maximize the Word window or expand the group to locate it.
- Apply the inside horizontal border. Choose Inside Horizontal Border. Word adds a horizontal rule at the internal boundaries between the selected rows. When the entire table is selected, this normally creates a line between each neighboring pair of rows without adding vertical lines or changing the outside edge. Check the table to confirm that the borders appear where you intended.
- Use a bottom border for a single row boundary. If you want a line after just one row, select that row and use Table Design > Borders > Bottom Border. This is often easier than applying inside borders to a larger selection. For a line above a row, select that row and choose Top Border. The border belongs to the selected cell or row, so check the result if the table has merged cells or an unusual layout.
- Adjust the line’s appearance if needed. Before choosing the border, use the controls on Table Design for Pen Style, Pen Weight, and Pen Color to choose a solid or dashed style, a thickness, and a color. Then reopen Borders and apply the border. If you apply the border first, you can select the affected cells and apply a different style and border again. A thin, dark solid line is generally easiest to read and prints reliably.
- Check the page and print preview. Scroll through the table, especially if it spans multiple pages, and confirm the line is consistent. Choose File > Print to inspect the preview before printing or saving a PDF. If the lines show in the document but not in print preview, confirm that you applied borders rather than merely showing table gridlines.
On a Mac: Click in the table to reveal the table tabs, select the table or rows, then use the Table Design tab and its Borders menu to apply Inside Horizontal Border. The ribbon layout and the wording or location of row-selection commands can vary slightly by Word for Mac release. If you cannot find a selection command, select the cells by dragging across them, then open the border menu. The result is the same: use a real table border, not a screen-only gridline.
Common Mistakes
Choosing All Borders when you only want horizontal lines. The All Borders command adds vertical borders between columns as well as horizontal ones, which can make a simple table look like a full grid. Choose Inside Horizontal Border for row separators. If you also need an outline around the table, apply Outside Borders separately.
Confusing gridlines with borders. Gridlines are faint guides Word can show while you edit a table that has no visible borders. They help identify cell edges, but they do not print. A border is formatting that normally appears in print and in a PDF. If a line vanishes in print preview, it may have been a gridline rather than a border.
Selecting the wrong cells. Applying a border to only one cell can leave gaps across the table, especially when the row contains several columns. For a continuous divider, select the entire row or the full table width before applying the border. If the table contains merged cells, inspect each section because its cell boundaries may not align with other rows.
Adding a new row instead of a line. Commands such as Insert Above and Insert Below create additional cells and change the table’s structure. Use a border command when you only want a visual separator. Conversely, if you need a blank space for more information, insert a row rather than drawing a border.
Using a drawn shape as a table divider. A line inserted from Insert > Shapes can drift when the table moves or changes size. Use a cell border for a line that should remain aligned with the rows. A shape is more appropriate for a decorative line outside the table or across ordinary page text.
Tips
For a consistent table, apply the same border to all interior row boundaries at once by selecting the table and choosing Inside Horizontal Border. This is faster and reduces the chance of small differences in thickness or color. If you only want separators in one part of the table, format that range rather than changing every row.
Use border weight with restraint. A line that is too thick can compete with the text, while a very pale color may be hard to see on screen or on a basic printer. If the table will be printed in black and white, choose a dark color and check the print preview. For a report with an existing table style, match its border color and weight so the new line looks intentional.
Keep the table’s outside edge separate from its internal dividers. For example, choose Outside Borders to outline the table and Inside Horizontal Border to separate rows, without adding vertical separators. You can also use Top Border on a header row to emphasize it, but avoid stacking multiple borders on the same edge unless the double-line effect is deliberate.
If you are unsure which cells Word will affect, apply the border to a small test selection first. You can undo an unwanted formatting change with Ctrl+Z on Windows or Command+Z on Mac, then select the correct cells and try again. Save the document before making extensive formatting changes, particularly in a long or shared document.
Troubleshooting
The Borders menu or Table Design tab is missing: Click inside an actual table cell. The table-specific tabs only appear when the cursor is in a table. If the document uses a picture of a table, or text arranged with tabs and spaces, Word will not show table border controls for it. Create or convert a real table before applying cell borders.
The line appears in the wrong place or only covers part of a row: Undo the change, select the full row or table, and apply the border again. For just one divider, select the row immediately above it and apply Bottom Border, or select the row below and apply Top Border. Merged cells can make a boundary look discontinuous; check the affected cells individually and apply the border to the cells that share the edge.
You can see faint lines, but they do not print: These are probably gridlines. Click in the table and choose Table Layout > View Gridlines to show or hide them while editing; this setting does not create printable lines. Select the cells and apply a border using Table Design > Borders, then check File > Print preview.
The border is too faint, too heavy, or the wrong color: Select the relevant cells, choose a more visible Pen Color and suitable Pen Weight on Table Design, then apply the desired border again. If the formatting is unclear, open Borders > Borders and Shading. In the dialog, choose the border setting and style, use the preview to inspect which edges are active, and confirm that the setting applies to the table or cells you selected.
The table style seems to override the change: Select the cells and explicitly apply the border you want from the Borders menu. Some table styles add or emphasize header, banded-row, or first-column formatting. You can change the style under Table Design > Table Styles, but you do not usually need to remove the whole style just to add a horizontal line.
Frequently Asked Questions
How do I add a line between every row in a Word table?
Click in the table, select it using Table Layout > Select > Select Table, then choose Table Design > Borders > Inside Horizontal Border. This adds horizontal separators between rows. Use All Borders only if you also want vertical lines between columns.
Can I put a line between only two rows?
Yes. Select the row above the boundary and choose Table Design > Borders > Bottom Border, or select the row below it and choose Top Border. Selecting the relevant row helps keep the divider aligned across all its cells.
Why does the line show on screen but not on the printed page?
It is likely a gridline, which is an editing guide rather than a printable border. Apply an actual border from the Table Design > Borders menu, then verify it in File > Print preview.
How can I remove a line between rows?
Select the affected cells, open Table Design > Borders > Borders and Shading, and use the preview to turn off the internal horizontal edge you want removed. Avoid choosing No Border for the whole table unless you intend to remove its outside and other cell borders too.
Can I add a line between lines of regular text instead of table rows?
Yes, but those are paragraphs rather than table rows. Place the cursor in the paragraph and use Home > Borders to apply a paragraph border, or insert a horizontal line from Insert > Shapes if you need a separate movable object. For a line that separates table entries, use the table-border method in this guide.
Related
- Google Sheets Jira Sync: Methods, Setup, and Limits
- Google Sheets Join Columns: Formulas and Methods That Work
- Google Sheets Jira Connector: Setup, Sync, and Options
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- Excel Conditional Formatting: Apply Rules to a RangeTo apply conditional formatting to a range in Excel for Microsoft 365 on Windows, select the cells, go…
- Custom Number Format in Excel for Lakhs: A Clear GuideTo show numbers with Indian lakh-style digit grouping in Excel, select the cells, press Ctrl+1, choose Custom, and…
- Excel Data Validation Lists: Add New Items in ExcelTo add an item to an Excel data validation list, update the list source: edit the comma-separated entries…
- Power Query in Google Sheets: What You Can Do InsteadNo—Google Sheets does not include Microsoft Excel’s Power Query editor, and it cannot run Power Query’s M language…
- Show Unread Emails in Outlook and Keep Them VisibleTo show only unread emails in Outlook, open the inbox or folder you want to check and apply…
- How to Hide Rows in Excel: Keyboard Shortcuts and TipsTo hide rows in Excel for Microsoft 365 on Windows, select the row or rows, then press Ctrl+9.…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.