To insert a vertical line between columns in Word, place the cursor in the section you want to format, then choose Layout > Columns > More Columns, select two or more columns, check Line between, and click OK. The rule separates the text columns without adding a border around the page. Before you start, decide whether the line should apply to the whole document or only a particular part; Word controls this with sections.
What You’ll Need
- A Microsoft Word desktop app. The steps below are for Word for Microsoft 365 on Windows.
- A document with text, or a place where you plan to type column text. You can set up columns before or after adding the content.
- If you want the rule in only part of the document, a plan for which paragraphs belong in that section. Word may add section breaks when you format a selected range.
Step-by-Step
- Open the document and choose where the columns should begin. If the rule should run through the entire document, you can leave the insertion point anywhere in the document and apply the setting to the whole document later. If it should affect only one existing section, click inside that section. Avoid selecting text unless you specifically want to create a column layout for just that selection.
- Decide whether to format the whole document or a portion. To create a newsletter-style area inside a document that is otherwise one column, select the paragraphs you want in columns. Word places section boundaries around selected text so the layout can differ from the rest. If you want columns to begin from the cursor onward, place the cursor at the starting point and use the relevant section option in the Columns dialog instead of selecting the whole document.
- Open the column settings. On the ribbon, select Layout, then select Columns in the Page Setup group and choose More Columns. The basic Two option can make two columns, but More Columns is the route to the divider setting. On current Microsoft 365 for Mac, use Layout > Columns > More Columns; the dialog labels may be arranged slightly differently from Windows.
- Choose a layout with at least two columns. In the Columns dialog, select Two for a standard pair, or choose Three or enter a number in the Number of columns box. The Line between option has no visible purpose with a single column, so make sure the chosen layout has two or more. If you choose unequal widths, check the preview to confirm the text space will still suit your content.
- Turn on the divider. Check the box labeled Line between. This adds a vertical rule in the gap between each adjacent pair of columns. With two columns, Word adds one line; with three, it adds a rule between the first and second columns and another between the second and third. It does not draw an outside border around the text area.
- Set where the change applies. Review the Apply to menu in the dialog. Choose Whole document if every section should use the column layout. Choose the option for the current section if the cursor is already in a section set up for columns. When working with selected text, Word may offer Selected text; choosing it makes the selection a separate formatted section. Options can vary with the document and selection.
- Check the preview, then apply the settings. The preview should show the number of columns and a divider between them. If it looks right, click OK. If you selected only part of the text, inspect the paragraphs immediately before and after it: they should remain in the intended layout, with the selected range flowing into columns.
- Review the result and adjust the text if needed. Scroll through the affected section and confirm that the rule is between the columns, not at the page edge. Text flows down the first column and then continues at the top of the next. If a heading or paragraph lands awkwardly, add or remove a column break or adjust the section content rather than trying to drag the divider; the rule follows the column layout.
Common Mistakes
Choosing Two from the quick menu and expecting a divider automatically. The basic Columns menu changes the number of columns, but the divider control is in More Columns. If you already made two columns, open Layout > Columns > More Columns, check Line between, and apply the change to the correct area.
Applying the setting to the wrong scope. A document can contain several sections, each with independent page layout settings. If the cursor is in a different section than you intended, the line may appear elsewhere or the whole document may change. Click within the target section and verify the Apply to choice before confirming. If formatting selected text, check that Word did not include an extra paragraph in the selection.
Looking for a page border or text box setting. The column rule is a layout feature, not a border around the page, and it is not a drawn shape. Adding a page border or inserting a line shape can put a mark in the wrong place and may not move correctly when text changes. Use the Columns dialog for a divider that stays between columns as the document reflows.
Tips
Use sections when the line should appear only in one area. A typical newsletter might begin with a single-column title, continue with two columns and a dividing rule, then return to a single-column contact block. Select only the middle text before opening More Columns, or create section breaks around that area and apply the column format to that section. This keeps the title and ending from inheriting the column layout.
Use the ruler and margins to improve readability. A divider makes a narrow column feel even more constrained if the page margins are wide or the gap is small. In the More Columns dialog, compare the preview and any available width or spacing controls. Leave enough space between the text and the rule so letters do not appear crowded against it.
Use a column break for deliberate starts. Word normally fills one column and then continues into the next. To start a new topic at the top of the next column, place the cursor at the desired point and choose Layout > Breaks > Column. A column break moves the following text; it does not add another divider or change the number of columns.
Keep a clean copy before making substantial layout changes. Section formatting can affect headers, footers, page numbering, and later content in ways that are easy to miss while editing. Save the document, then inspect the full affected pages in Print Layout. If the result is not right, use Undo immediately or reopen the saved copy and apply the layout to a narrower section.
Troubleshooting
The line does not appear. Reopen Layout > Columns > More Columns and confirm that the layout has at least two columns and that Line between is checked. Also check the Apply to choice. If Word applied the setting to another section, click inside the intended section and repeat the change. Make sure you are viewing the document in a page layout view rather than relying on a view that does not clearly show page formatting.
The line appears throughout the document. The setting was probably applied to the whole document or to multiple sections. Click in a section that should remain single-column, open More Columns, choose One, and apply it to that section. If the relevant area does not have its own section boundary, select its text and apply the one-column or multi-column layout to the selection so Word separates it from neighboring content.
The columns or rule start in the wrong place. Show formatting marks with Home > Show/Hide ¶ to inspect paragraph marks and section breaks. A section break controls where page layout settings change, while a column break controls where text moves to the next column. Remove an accidental break carefully, then insert the appropriate break or reapply the layout to the correct selection. Deleting a section break can cause the surrounding sections to share formatting, so check the result afterward.
The columns look uneven or text jumps unexpectedly. This is often normal column flow: Word fills the first column before continuing to the next. Check for manual column breaks, extra blank paragraphs, or a selected range that includes more text than intended. If you need more control over where columns end, adjust the text or add a deliberate column break. If the rule itself is too close to the text, return to More Columns and adjust column spacing or widths when those controls are available.
You cannot find More Columns or Line between. Word for the web has fewer page-layout controls than the desktop app, and some versions do not expose the full divider options. Open the file in the Word desktop app and use the Layout tab. If you are using a managed workplace installation, the ribbon may be simplified; expand the ribbon or search for Columns, then open the full Columns dialog.
Frequently Asked Questions
Can I add a line between just two columns?
Yes. Choose Two in the Columns dialog and check Line between. The rule appears in the gap between those columns. If the two-column layout should apply to only part of the page or document, apply it to a selected range or a dedicated section.
Can I put a line between three columns?
Yes. Choose Three and check Line between. Word puts a line in each gap between neighboring columns. The checkbox controls the column dividers as a group; it does not let you select only one of the gaps.
Can I change the divider’s color, thickness, or style?
The built-in Line between option provides a simple layout rule and does not offer the same formatting controls as a shape. If you need a custom color or weight, you can insert a line shape, but it may need repositioning when text or page layout changes. For a rule that reliably follows columns, use the built-in setting.
Can the line appear on only one page?
Yes, if that page’s column text is in its own section. Create section boundaries around the content, apply the columns and divider to that section, and leave neighboring sections in one column. A page break alone may not isolate layout settings, so use section breaks when the formatting must differ.
Does the line move when I edit the text?
Yes. Word treats it as part of the column layout, so it remains in the gap as text reflows or the column widths change. It is not anchored to a specific paragraph like a manually inserted shape, which is why the built-in rule is usually the better choice for ongoing documents.
Related
- Google Sheets Limitations vs Excel: Key Differences
- Google Sheets Jorge4244: What the Name May Refer To
- Google Sheets Journal Template: Build a Useful Daily Log
Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.
More in How-to basics
- How to Delete a Page in Word With a HeaderTo delete a page in Word that has a header, remove the page’s body text or the break…
- Conditional Formatting to Highlight Blank CellsYes. In Excel for Microsoft 365 on Windows, select the range and choose Home > Conditional Formatting >…
- Can You Shuffle Names in Excel? Methods and ExamplesYes. In Excel for Microsoft 365 on Windows, add a random number beside each name and sort the…
- How to Screen Record a PowerPoint Presentation with AudioTo record a PowerPoint presentation with narration, open the deck and choose Record > From Beginning in PowerPoint…
- Excel Not Responding When Deleting Rows? Causes and FixesIf Excel stops responding while deleting rows, first give it a little time: removing rows can trigger lengthy…
- How to See Named Ranges in Excel and Check Their CellsTo see a named range in Excel, open Formulas > Name Manager to view its name and the…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.