How to Do Superscript in Excel with a Shortcut

How-to basics · Updated November 20, 2026

To make text superscript in Excel for Microsoft 365 on Windows, select the character or text, press Ctrl+1, open the Font tab, check Superscript, and choose OK. Excel does not provide a single default key that instantly toggles superscript, but this keyboard route opens the formatting controls quickly. Superscript raises text above the baseline, which is useful for exponents, footnote markers, and ordinal endings such as the “th” in “4th.”

What You’ll Need

  • Excel for Microsoft 365 desktop on Windows. The steps also apply to many recent desktop versions of Excel.
  • A cell containing text, or a cell you can edit to select a particular character. Superscript changes formatting, not the underlying meaning or value of the text.
  • A keyboard, if you want to use the shortcut route. You can also open the Format Cells dialog from the ribbon.

Step-by-Step

  1. Enter or locate the content. Type the text in a worksheet cell, or find the existing cell you want to format. For a partial superscript—such as just the “2” in “m2”—you need to select that character while editing the cell. For a whole cell of text, you can select the cell itself.
  2. Select the part you want to raise. To format all the text in a text cell, click the cell. To format only certain characters, double-click the cell or select it and press F2 to edit it. Then drag across the characters with the mouse, or use the arrow keys while holding Shift to highlight them. Confirm that the intended characters are highlighted before opening the formatting dialog; otherwise Excel may apply the effect to the whole cell or to no text selection at all.
  3. Open Format Cells with the keyboard. Press Ctrl+1 on Windows. This opens the Format Cells dialog. In many Excel installations, Ctrl+Shift+F also opens the dialog directly on the Font tab. Use Ctrl+1 if that alternative does not work in your version or keyboard setup.
  4. Go to the Font tab. Select Font at the top of the dialog. If you are navigating without a mouse, use Ctrl+Tab to move through the dialog’s tabs until Font is active. The exact starting tab can depend on the last tab used, so check the tab name rather than assuming you have arrived at the right place.
  5. Turn on Superscript. Under Effects, select the Superscript checkbox. Do not select Subscript, which places characters below the baseline. The preview area can help you check that you chose the intended effect.
  6. Apply the formatting. Choose OK to close the dialog and return to the worksheet. The selected text should now appear smaller and raised relative to the baseline. If only part of a cell’s text was selected, the rest should remain at its original size and position.
  7. Check the result and leave edit mode. Press Enter if you are still editing the cell, then inspect it at a readable zoom level. Superscript is a visual character-formatting effect; it does not turn a number into an exponent or change a formula’s calculation.

For a whole cell: If the entire cell contains text that should be raised, select the cell before pressing Ctrl+1, then apply the Font tab’s Superscript effect. This is different from formatting one character within the cell. If Excel does not apply the effect as expected to a numeric value, consider storing the displayed content as text or using a superscript Unicode character, as explained below.

For the ribbon instead: Select the cell or text, then go to Home and open the Font dialog launcher—the small diagonal arrow in the lower-right corner of the Font group. Choose Superscript under Effects and click OK. The ribbon route is handy when the shortcut is unavailable or you prefer to see the formatting options.

To remove superscript: Select the same character range or cell, open Format Cells again, and clear the Superscript checkbox. Click OK. Superscript is a toggle-like setting in the dialog, but it is not a standalone keyboard toggle: you must open the Font settings and change the checkbox.

On Mac: In Excel for Mac, select the cell or characters and press Command+1 to open Format Cells. Choose the Font tab and enable Superscript. If a keyboard shortcut conflicts with macOS or your keyboard layout, use the dialog launcher or the relevant formatting options in the Home ribbon. Excel for the web has fewer character-formatting controls than the desktop app; if you cannot find Superscript there, open the workbook in the desktop version or use a superscript character from the Unicode character set for simple static labels.

Common Mistakes

  • Expecting a one-key toggle. Excel does not have a standard built-in shortcut that immediately switches superscript on and off. Ctrl+1 opens the Format Cells dialog; you still need to choose the Font tab and set the effect.
  • Formatting the cell instead of a character. If you want just one digit raised, selecting the cell and applying Superscript may affect all its contents. Edit the cell first, highlight only the target characters, and then open the dialog.
  • Using superscript as a calculation. Formatting “2” as superscript in “x2” does not make Excel calculate x squared. It only changes how the character looks. Use a mathematical formula for calculations, and reserve character formatting for labels or presentation.
  • Assuming numeric values behave like text. Individual-character formatting is intended for text characters. Numeric entries and formula results may not support the same partial formatting behavior, and superscript formatting does not alter their stored values. If a value must be displayed as a raised character, consider using text or a suitable Unicode symbol.
  • Choosing Subscript by mistake. Superscript raises characters; Subscript lowers them. Check the checkbox label and the preview before applying the change.
  • Forgetting that formatting can be hard to spot. A small superscript can look unchanged at low zoom, especially in a narrow cell. Increase the zoom or widen the column before deciding the shortcut failed.

Tips

  • Use superscript sparingly. It works well for compact notation such as “x²,” a footnote reference, or a unit marker. Too many raised characters in a paragraph can make text harder to scan, especially at small font sizes.
  • Use a Unicode character for common symbols. Characters such as ², ³, and ¹ are superscript forms in the character itself. They can be useful in a heading or short label and generally display consistently when shared. Availability and appearance depend on the font. They are separate characters, not ordinary digits with Excel formatting, so do not use them where you need the cell to remain a numeric value.
  • Keep calculation data separate from display text. If a worksheet needs a value for formulas as well as a carefully styled label, keep the numeric value in one cell and put the formatted label in another. That prevents visual formatting or text conversion from interfering with calculations and sorting.
  • Reuse formatting thoughtfully. You can copy a cell with the desired appearance and use Paste Special formatting options to apply formatting elsewhere, but check whether that action also changes other visual settings. For a few characters within different cells, the Format Cells method gives more control.
  • Check the selected range before applying changes. In edit mode, a text selection is easy to lose if you click another cell. Make sure the characters remain highlighted when you open the Font dialog and verify the result immediately afterward.
  • Remember the Mac key difference. Use Command+1 on Mac rather than the Windows Ctrl+1. If your keyboard uses a different layout or system shortcuts intercept a key combination, access the same option through the Format Cells dialog.

Troubleshooting

Ctrl+1 does not open Format Cells. First click a worksheet cell or make sure you are working inside Excel rather than another window. If the shortcut is captured by another program, use the Font group’s dialog launcher on the Home tab. On Mac, use Command+1. Laptop keyboards and custom key mappings can also affect combinations, so the ribbon is a practical backup.

The whole cell changed instead of just one character. Undo with Ctrl+Z on Windows or Command+Z on Mac, then edit the cell again. Use F2 or double-click, select only the required characters, and reopen Format Cells. Do not click elsewhere between selecting the characters and applying the effect.

The character does not look raised. Reopen the Font tab and confirm that Superscript is checked. Check that you did not select Subscript, and inspect the result at a larger zoom. If the chosen font has limited character support or the text uses a special font, try a common font such as Aptos or Calibri and compare the result.

The option is missing or unavailable. Confirm that you are using Excel’s desktop app and that the Font tab is open. Some options are limited in Excel for the web, and a protected worksheet or a restricted editing state may prevent changes. If the workbook is protected, request permission or use the allowed cells; do not remove protection unless you are authorized to do so.

Superscript appears but the calculation is wrong. Formatting never changes the value or formula. If you need exponentiation, write the calculation using Excel’s caret operator in a formula, for example =A1^2. If A1 contains 5, that formula returns 25. Use the superscript appearance only for the text you want people to read, not as a substitute for the calculation.

Formatting disappears after editing or pasting. Pasting new content can replace character-level formatting, depending on the paste option. Reapply superscript to the intended characters, or paste values and formatting separately as appropriate. If the cell is generated by a formula, its displayed result cannot generally carry independent formatting for just selected output characters; create a separate text label or use a Unicode superscript symbol when suitable.

Frequently Asked Questions

What is the shortcut for superscript in Excel?
There is no default single-key superscript toggle. On Windows, Ctrl+1 opens Format Cells; choose Font, check Superscript, and click OK. Ctrl+Shift+F may open the Font tab directly.

How do I superscript just one number in a cell?
Edit the cell with F2 or a double-click, highlight the number, press Ctrl+1, and enable Superscript on the Font tab. This is for text characters; numeric values and formula results may not allow the same partial-character formatting.

Can I use superscript in an Excel formula?
Superscript formatting is not a calculation operator. For a power, use the caret operator in the formula, such as =3^2, which returns 9. Format a separate text label if you also need a raised character visually.

How do I superscript in Excel on a Mac?
Select the text or cell, press Command+1, open the Font tab, check Superscript, and click OK. You can use the ribbon’s Font dialog launcher if that shortcut is unavailable.

Can I superscript text in Excel for the web?
The web app may not expose the same character-level Font controls as desktop Excel. If Superscript is unavailable, open the workbook in desktop Excel, or insert a Unicode superscript character for a short, static label.

How do I turn superscript off?
Select the affected text or cell, reopen Format Cells, clear the Superscript checkbox under Font, and click OK. For a single character, select that character while editing so you do not remove the effect from the entire cell.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.