How to Center an Excel Table in Word Without Distorting It

How-to basics · Updated November 20, 2026

To center a copied Excel range in Word, click inside the table, choose Table Layout > Properties, open the Table tab, select Center under Alignment, and click OK. This centers the table between the page margins; it does not center the text inside its cells. The steps below are for Microsoft Word and Excel for Microsoft 365 on Windows.

What You’ll Need

  • The Excel range or table you want to place in Word.
  • A Word document with the page orientation and margins you intend to use. A wide table may need landscape orientation or narrower margins to fit.
  • Permission to edit the document. If it is protected or opened read-only, you may not be able to change its layout.

Step-by-Step

  1. Copy the Excel cells. In Excel, select the complete range, including the header row if you want it included, and press Ctrl+C. If the data is formatted as an Excel Table, you can copy the table’s cells; you do not have to convert it first. On a Mac, use Command+C.
  2. Paste it into Word as a table. Click the location in the document where the table should go. On Windows, open Home > Paste and choose Keep Source Formatting to retain much of the Excel appearance, or Use Destination Styles to match the Word document. The pasted cells should appear as an editable Word table. On Mac, paste normally with Command+V, then use the paste options button if you want to change how formatting is applied. The available options can vary with the clipboard content and Word version.
  3. Check what Word pasted. Click the result. If Word shows the contextual Table Design and Table Layout tabs, it is a Word table and you can use the alignment steps below. If the result behaves as one object, such as a single Excel worksheet object or picture, it is not a Word table. The Table Properties steps will not apply to it; see the object note in step 8 or paste the cells as a Word table instead.
  4. Open the table’s properties. Click in any cell. On Windows, choose Table Layout > Properties. You can also right-click inside the table and choose Table Properties. In Word for Mac, select the table and use Table Layout > Properties if that command appears in the ribbon, or choose Table > Table Properties from the menu bar. The dialog lets you align the table as a whole, rather than just its cell contents.
  5. Set the table alignment to Center. In the Table Properties dialog, make sure the Table tab is active. Under Alignment, select Center, then click OK. Word positions the table horizontally between the left and right text margins. It does not center the table vertically on the page.
  6. Check the result at the page width. Look at the left and right edges of the table relative to the text area. If the table is narrower than the available line width, the two side gaps should be similar. If the table fills the entire text area, it may technically be centered but appear unchanged because there is little or no space on either side.
  7. Make a wide table fit before judging its position. If columns extend beyond the margin or Word has pushed the table onto another page, select it and use Table Layout > AutoFit. Choose AutoFit to Window to fit the table to the available text width. This can change column widths, so inspect the result and adjust columns if labels wrap or become hard to read. For a genuinely wide table, consider Layout > Orientation > Landscape for that page or section, rather than squeezing the data excessively.
  8. Center cell text only if you also want that. To center text inside cells, select the relevant cells or the whole table. Open Table Layout and use the appropriate control in the Alignment group. The group includes choices for horizontal and vertical placement. This is separate from centering the table on the page, and changing it is not required for the table itself to sit in the middle.

If you pasted an object instead: An embedded Excel worksheet or a pasted picture is positioned as an object, not as a Word table, so it has no Table Properties alignment setting. If you need editable Word cells and the simple table-centering steps, paste the range again as a Word table. If you need to preserve it as a single object, select it and use the object’s available layout or position controls in Word; those controls depend on whether it is an embedded worksheet, picture, or other pasted format. Do not use the cell-text alignment buttons to move the object.

Common Mistakes

  • Using the paragraph Center button. Home > Center aligns the paragraph containing the table or text around it; it is not the reliable control for a Word table’s own position. Use Table Properties > Alignment > Center instead.
  • Centering the contents instead of the table. The alignment buttons in the Table Layout ribbon change where words sit inside cells. A table can have centered cell text while the table remains aligned to the left margin, or vice versa.
  • Selecting only one cell. You do not need to select every cell to set the table’s overall alignment. Click inside the table and open its properties. If you are changing cell formatting, however, select the cells you mean to affect.
  • Expecting a full-width table to visibly shift. A table that reaches both text margins has no spare horizontal space in which to move. Reduce its width or adjust column widths before expecting a visible centered position.
  • Assuming every paste is a Word table. Paste Special or a particular paste option can create a linked or embedded Excel object, or an image. Check for the contextual table tabs before following table-specific commands.
  • Dragging the table by eye. Dragging can change its position, create an indent, or make it float, and the result may not stay centered after edits. Set the alignment in Table Properties for a normal in-line Word table.

Tips

  • Choose the paste format based on your goal. A Word table is usually easiest to edit in a report and can be centered with Table Properties. An embedded Excel object can retain spreadsheet behavior, while a picture preserves appearance but is not editable as cells. Pick the format before spending time on layout.
  • Set page layout before fine-tuning columns. If the table belongs on a landscape page or needs different margins, change the page or section layout first. Then use AutoFit or adjust widths. Otherwise, later changes to the text area can make a carefully fitted table overflow.
  • Use a section break for a single landscape page when needed. If only the table page should be landscape, create section breaks before and after that page, then change orientation for that section. Verify the surrounding pages remain portrait; applying orientation without section control can affect more of the document than intended.
  • Keep the table in line with text for predictable layout. A standard pasted Word table is usually positioned in the document’s text flow. If text wrapping or a floating position has been applied, the table may not behave as expected. In Table Properties, check the text-wrapping setting; selecting None keeps the table in line with the text flow.
  • Save a copy before major layout changes. This is especially useful if you are changing page orientation, margins, or many column widths. It gives you a safe version to return to if pagination changes unexpectedly.

Troubleshooting

  • The table still looks left-aligned. Reopen Table Properties and confirm that Center is selected on the Table tab. If it is, check whether the table is as wide as the text area. Also check for a nonzero left indent in the same dialog; set the indent to zero when appropriate, then apply the centered alignment again.
  • There is no Table Layout tab. Click directly inside the table, rather than beside it or on a pasted picture. If the contextual tabs still do not appear, the content may be an Excel object or image. Paste the cells again as a Word table, or use the layout controls for the object type you have.
  • The Properties command is unavailable. Make sure the document is editable and that the cursor is inside an actual Word table. A protected document, read-only view, or selected object can prevent the table command from appearing. If the file is in Protected View, enable editing only if you trust its source.
  • The table is centered but columns are cut off. Centering does not resize a table. Choose Table Layout > AutoFit > AutoFit to Window, reduce column widths, or change the relevant page or section to landscape. Then check that important words and numbers remain readable rather than accepting overly narrow columns.
  • The table moves when you add text. A normal in-line table moves with the surrounding paragraphs as the document reflows. If you need it to stay at a particular location, review the table’s text-wrapping and positioning settings. Avoid switching to a floating layout unless you need text to wrap around the table, because floating placement can be more difficult to maintain across edits.
  • The table is centered but the text is not. That is expected: table position and cell alignment are separate settings. Select the cells and choose the desired horizontal and vertical alignment from Table Layout if you want to change how the contents sit within them.

Frequently Asked Questions

Does centering the table also center the text in its cells?
No. Table Properties centers the table between the margins. To center words or numbers inside cells, select those cells and use the alignment controls on the Table Layout tab.

Can I center an Excel table without changing its formatting?
Usually. Pasting with Keep Source Formatting retains much of the Excel styling, and setting table alignment in Word does not itself change cell colors, borders, or fonts. Some formatting can still differ between Excel and Word.

Why is Center selected but the table does not move?
The table may already fill the text width, so there is no visible gap to either side. It may also have a left indent or a floating layout. Check the width, indent, and text-wrapping settings in Table Properties.

Can I center only one table on a page?
Yes. Table alignment is set for the selected table, so centering it does not automatically center other tables in the document. Page orientation and margins, by contrast, apply to a page or section.

What if I need the table centered vertically on the page too?
Table Properties centers the table horizontally, not vertically. Vertical placement is a page-layout issue and may require changing paragraph spacing or using a separate section with vertical alignment settings. Check the surrounding text and page breaks so the table does not disrupt the rest of the document.

Do the same steps work in Word for Mac?
The table-alignment setting is the same, but the command location can differ by build. Select the table and look for Table Layout > Properties, or use Table > Table Properties in the Mac menu bar. On Mac, copy and paste with Command+C and Command+V rather than Ctrl+C and Ctrl+V.

Related

Try it: the Date Difference Calculator: days, months, years and weekdays between two dates, with the DATEDIF formulas.

More in How-to basics

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.