Excel Donut Chart Labels Outside: How to Set Them

Charts & pivot tables · Updated November 19, 2026

Yes. In Excel for Microsoft 365 on Windows, select the donut chart, then choose Chart Design > Add Chart Element > Data Labels > Outside End. To adjust what appears beside each slice, right-click a label, choose Format Data Labels, and use the options in the pane.

Put donut chart labels outside the slices

Outside End positions each data label beyond the edge of its doughnut segment. Use these steps in the desktop version of Excel for Windows:

  1. Click the chart, then click a data label if labels are already present. If not, select the chart itself.
  2. On the ribbon, open Chart Design > Add Chart Element > Data Labels > Outside End.
  3. If labels are absent and the menu does not add them as expected, use Chart Design > Add Chart Element > Data Labels, then choose Outside End again.
  4. To change the label content or fine-tune its position, right-click a label and choose Format Data Labels. The Format Data Labels pane opens.

Another route is to click the chart, select the green plus-shaped Chart Elements button beside it, and turn on Data Labels. Its arrow opens placement choices, including Outside End when supported for the selected chart. The ribbon route is easier to follow because it names the placement directly. In Excel for Mac, select the chart and use the Chart Design tab; ribbon wording and pane layout can vary by release. Excel for the web may offer fewer formatting controls than the desktop app, so use desktop Excel if you cannot find a particular label option.

What Outside End means

A doughnut chart displays each value as a segment of a ring. Outside End places labels beyond the outer circumference rather than inside a segment or in the central hole. This gives longer category names and percentages more room, and leaves the colored slices less crowded. It does not change the data, segment sizes, or order; it changes only where the labels are displayed.

Excel may arrange labels around the ring and connect them to their segments with leader lines. The chart can shift labels to avoid collisions, but it cannot always make a dense set readable. The result depends on the chart’s dimensions, the amount of label text, and how many categories are represented. A wide chart often gives labels more horizontal space than a small square chart.

Outside End is different from Data Callout. Outside End places labels beyond the ring, while Data Callout uses callout-style label boxes. If you need a simple category-and-percentage display, start with Outside End; try callouts only if their boxes make the association between label and slice clearer.

Choose what each label displays

Position is only one part of the label. Right-click a data label and choose Format Data Labels to open the pane. Under Label Options, you can select the information that appears, such as Category Name, Value, and Percentage. Available choices can depend on the chart and Excel release. Avoid selecting every option by default: a label that repeats a long category name, a raw value, and a percentage can become harder to scan than the chart itself.

For a chart of monthly support requests, for example, labels might show a short category such as Billing or Login together with a percentage. If the exact count matters, show the value instead, or include both value and percentage when the number of segments is small. Percentages explain each segment’s share of the total; they are not the same as the raw values. Check that the plotted data is the intended total and that the categories make sense before relying on those percentages.

In many current desktop versions, the Format Data Labels pane also offers Value From Cells. This lets you use a worksheet range for custom label text, such as abbreviated names or a combined label prepared in cells. Select Value From Cells, choose the range, and confirm the selection. If the option is missing, verify that you are formatting labels on a supported chart in the desktop app; features and availability may differ by version. Custom labels are useful when source names are lengthy, but keep the worksheet labels aligned with the values so readers can identify each slice correctly.

Use leader lines and manage label positions

Leader lines are the thin connectors between an outside label and its segment. They are particularly helpful when several nearby slices have labels on the same side of the chart. In Format Data Labels, look for Show Leader Lines under the label options and turn it on if it is available. Excel may show or adjust connectors as labels are moved, and the control can depend on the selected label position and chart type.

If two labels overlap, first make the chart larger or shorten the text. You can also select an individual label and drag it to a clearer location. In some Excel builds, moving an outside label away from its automatic position makes its leader line appear; if a connector is not visible, check the pane’s leader-line setting. A line should point clearly to the intended segment, not cross a cluster of other labels. After moving labels, check the chart again if you resize it, because the new dimensions can change spacing.

For a report or presentation, test the chart at the size readers will see it. A chart that looks clear at full screen may become cramped when inserted as a small image or printed on a page. If you need to move many labels by hand, that is a sign to simplify the label text or reconsider whether a doughnut chart is the best display.

Make outside labels easier to read

Outside labels work best when they identify slices quickly without overwhelming the graphic. A few practical choices can improve the result:

  • Use concise category names. Put detailed definitions in a note, table, or nearby text rather than forcing long descriptions around the ring.
  • Choose one primary number format: category plus percentage, or category plus value, unless readers genuinely need both.
  • Give the chart enough width and height. A larger plot area leaves more room for labels and leader lines.
  • Use readable text size and strong contrast. Do not rely on color alone to distinguish categories, especially if the chart may be printed in grayscale.
  • Sort categories deliberately in the source data when that makes the story easier to follow. Sorting changes the slice order, so check that the colors and labels still correspond as intended.
  • Keep the legend only if it adds information. If each outside label already names its category, a separate legend may duplicate the same text.

For instance, a budget chart with six categories can often show category and percentage outside the ring without difficulty. A chart with twenty categories and long department names is likely to crowd, even when the chart is enlarged. A useful remedy is to group very small categories as Other, provided that grouping is appropriate for the analysis and the underlying data is still available to readers who need detail.

When a doughnut chart has multiple rings

Excel uses a doughnut chart with multiple data series to create concentric rings. Each series becomes a ring, and the category segments occupy corresponding positions around those rings. Outside labels can be confusing in this setup: labels from inner and outer series may compete for the same space, and a category name alone may not tell the reader which series a value belongs to.

Before adding labels to every ring, consider whether the comparison is understandable without them. You might label only the outer series, use a legend to identify series, or place a compact data table beside the chart. If labels are essential, include enough context to distinguish both category and series, then check that connectors lead to the correct ring. A basic single-series doughnut is usually easier to label clearly than a multi-ring chart.

Fix common label problems

Outside End is unavailable: confirm that the selected object is a doughnut chart and that you have selected the chart or its data labels rather than a worksheet cell or title. Check the Data Labels submenu under Chart Design > Add Chart Element. Some chart types and chart elements expose different placement choices.

Labels are cut off: enlarge the chart or move it away from the worksheet edge. If the chart is placed in a tight layout, Excel may not have room to draw all outside text. Shortening the labels and reducing unnecessary label items is usually more effective than shrinking text until it is difficult to read.

Labels overlap or appear on the wrong side: increase the chart area, reduce the amount of text, or reposition individual labels. Excel’s automatic layout is not a guarantee that every label will remain distinct at every size. Recheck the chart after resizing or changing data.

Percentages do not match expectations: verify which values are included in the chart and whether the chart contains more than one series. A percentage label represents a share of the plotted data for that chart, not necessarily a share of some wider total in your workbook. If the chart omits rows or includes unintended values, correct the chart’s source data before changing the label format.

Labels disappear after editing: confirm Data Labels is still enabled and review the label settings. Editing the source range, changing chart type, or replacing a series can affect which labels are shown. Reapply Outside End and check the individual label options after the data change.

When another chart is a better choice

Outside labels do not solve every communication problem. A doughnut chart is most useful when the reader needs to see a small number of parts as shares of one whole. It is less effective when slices are numerous, values are close together, or precise comparisons matter. People generally compare lengths more easily than angles or areas, so a bar chart can make small differences clearer.

Use a bar chart when readers need to rank many categories or compare similar values. Use a table when exact numbers and detailed labels are more important than a quick visual summary. A doughnut chart may still be suitable when the central hole has a practical purpose, such as holding a brief total, but avoid adding text to the hole if it competes with the outside labels. The right chart depends on the question, not just on whether Excel can place labels outside it.

Frequently Asked Questions

Can Excel put donut chart labels outside?

Yes. Select the chart and choose Chart Design > Add Chart Element > Data Labels > Outside End. Then use Format Data Labels to choose whether the labels show categories, values, percentages, or other available details.

How do I show percentages outside a doughnut chart?

Set the label position to Outside End, right-click a label, and open Format Data Labels. Under Label Options, turn on Percentage and turn off label items you do not need. Check that the chart includes the correct values, since the percentages describe the plotted total.

How do I add lines from outside labels to slices?

Open Format Data Labels and look for Show Leader Lines. Enable it if the option is available for the chart and label position. You can also move an individual label farther from its slice; Excel may display a connector to show which segment it describes.

Why are my outside labels overlapping?

There may be too many labels, the chart may be too small, or the category text may be too long. Enlarge the chart, shorten the labels, show fewer label items, or group appropriate small categories. If the chart remains crowded, use a bar chart or a table instead.

Can I use custom text for doughnut chart labels?

In supported desktop versions, use Value From Cells in the Format Data Labels pane and select the worksheet cells containing the custom text. The option may not be available in every Excel version or chart context. Keep custom labels consistent with the source data so readers can match each name to its slice.

Related

Try it: the Percentage Formula Generator: percent of, percent change, increase and decrease, with the formula.

More in Charts & pivot tables

Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources

Spotted an error in this guide? Let us know.