If Bloomberg will not export to Excel, first identify whether the failure is in a Terminal export or in the Bloomberg Excel Add-In: they use different routes. Confirm Excel is open on the supported desktop, Bloomberg is signed in, and your account has access to the requested data; then check the add-in and retry with a blank workbook.
Two different ways Bloomberg data reaches Excel
People use “export to Excel” to describe two related but distinct tasks. One is sending a screen, table, or result from the Bloomberg Terminal to an Excel workbook. The other is using the Bloomberg Excel Add-In, which lets a workbook request Bloomberg data and refresh it. A failure in one route does not necessarily mean the other is broken.
A Terminal export is initiated from the Bloomberg screen or workflow you are viewing. The available export or output action can vary with the screen, data type, and the Bloomberg setup at your firm. The Excel Add-In is installed for desktop Excel and provides Bloomberg ribbon tools and Bloomberg data functions, including commonly used functions such as BDP, BDH, and BDS. It requires a supported Bloomberg connection and appropriate access.
Start by asking what happens: does Excel fail to open, does a workbook open without the expected content, or do Bloomberg formulas show an error or stop updating? That distinction narrows the cause quickly. A blank result from a Terminal export is not fixed by changing formula settings, and a missing add-in ribbon is not usually fixed by repeating the Terminal command.
Identify the exact failure before changing settings
Repeat the operation once and note the result, including any error text. Check whether the issue affects one screen, one workbook, or every Bloomberg workflow. If exports from only one screen fail, the problem may be specific to that screen or the type of data it displays. If an existing Bloomberg workbook also fails to refresh, investigate the add-in, connection, and entitlements rather than the export command alone.
- No Excel window opens: Excel may be closed, unavailable to the Terminal session, or blocked by a managed desktop configuration.
- A workbook opens, but data is missing: Check the selected range or output option, the source screen, and whether the export completed.
- Bloomberg tools are absent in Excel: Check whether the desktop add-in is installed, enabled, and available in this Excel session.
- Bloomberg formulas show errors or stale values: Check the Bloomberg connection, data permissions, formula inputs, and refresh behavior.
Also establish whether you are using desktop Excel for Microsoft 365 on Windows, Excel for the web, a Mac, or a remote desktop. Bloomberg’s desktop integration is not interchangeable with a normal Excel workbook opened in a browser. A workbook may open in Excel for the web while Bloomberg-specific formulas cannot connect or refresh there.
Check the connection, sign-in, and working session
Make sure the Bloomberg Terminal or Bloomberg software session is signed in and functioning before asking Excel to retrieve data. If your firm uses a shared, virtual, or remote desktop, confirm that Excel and the Bloomberg session are running in the environment expected by your organization. A Terminal on one computer may not be able to send content to Excel running in a separate or isolated session.
Close and reopen Excel after signing in to Bloomberg, then try a small, known-good task in a new blank workbook. This helps distinguish a connection issue from a damaged workbook. If the connection has recently dropped, sign out and back in only if your firm’s procedures allow it; do not terminate managed Bloomberg or remote-desktop processes yourself.
Network access can matter too. A corporate firewall, proxy, VPN change, or temporary service interruption may prevent the Excel component from communicating with Bloomberg. If other Bloomberg features are also unavailable, or colleagues on the same managed environment report the same issue, contact your Bloomberg support channel or firm help desk instead of changing network or security settings.
Verify that the Bloomberg Excel Add-In is enabled
If the Bloomberg tab or Bloomberg tools are missing, check Excel’s add-in status on Windows. In Excel, go to File > Options > Add-ins. Review the list of active and inactive add-ins. If your organization’s Bloomberg installation appears under COM Add-ins, select COM Add-ins in the Manage box and choose Go; if it appears under Excel Add-ins, use that category instead. Enable only the Bloomberg component installed by your organization.
Also review disabled items from File > Options > Add-ins by choosing Disabled Items in the Manage box and selecting Go. If Excel disabled a Bloomberg component after a crash, your administrator may need to restore it or repair the installation. Restart Excel after an approved change. If the component is absent entirely, it may not be installed for your Windows profile or that particular Office installation.
Do not download a purported Bloomberg add-in from an unrelated website, enable every add-in, or weaken Excel’s macro security to make an export work. Bloomberg software is normally provided through Bloomberg or an organization’s managed software process. If the add-in is missing, ask your firm’s IT team or Bloomberg support how it should be installed and whether your version of Office is supported.
For a Terminal export, retry with a simple destination
When the Terminal command itself is the problem, try a controlled retry rather than repeatedly exporting into the same complex workbook. Open desktop Excel first, create a blank workbook, return to the Bloomberg screen, and use the export or output action offered for that screen. If the screen offers different destinations or formats, choose the Excel-compatible option explicitly. The exact wording and choices are not identical across every Bloomberg function.
If the retry works in a blank workbook, the original destination may be part of the problem. It could be open in another Excel session, protected, read-only, stored in a restricted folder, or affected by workbook features that complicate editing. Save a copy locally in a folder where you are allowed to write, and try the export there. Do not overwrite a shared or production workbook just to test the integration.
If no workbook appears, check whether Excel is already open behind another window and whether a save or security prompt is waiting for input. On a managed computer, the Terminal may be prevented from launching another application or passing data between programs. That policy should be addressed by IT; do not try to bypass it with registry edits or unapproved scripts.
Check data access, formula inputs, and refresh results
Seeing a Bloomberg formula in a cell does not guarantee that your account is entitled to the requested data. Bloomberg data availability can depend on the security, field, date range, service, and user permissions. A function that works for one security or field may return an error for another. Check the function’s inputs against Bloomberg’s field and security conventions, and use Bloomberg’s built-in help or your firm’s data support process to interpret the specific message.
For instance, a workbook designed to retrieve a historical series is not equivalent to a one-time Terminal export. It may need a connection to refresh, and dates, overrides, or field names can affect the returned values. If the workbook was sent by someone else, ask whether it depends on a particular Bloomberg login, data entitlement, or add-in version. Do not assume that a blank cell means the export failed; it could be a valid empty result or a request the account cannot access.
Check Excel’s calculation mode if formulas appear not to recalculate: in desktop Excel for Windows, use Formulas > Calculation Options and confirm the workbook is not intentionally set to Manual. Calculation mode can affect when Excel recalculates cells, but it cannot restore a missing Bloomberg connection or grant data permission. Refresh using the Bloomberg tools provided in your installation and compare the returned result with the source screen where appropriate.
Rule out workbook, folder, and Excel-session problems
A workbook can interfere with a valid data request. Protected View, read-only access, sheet protection, file permissions, or a workbook opened from a restricted location may prevent changes or saving. If the export or refresh is intended to write to a file, test with a new workbook in an approved writable location. If that succeeds, investigate the original file’s protection and storage location before changing any settings.
Excel can also have more than one process or window open. A Terminal may direct output to a different Excel instance than the one you are watching. Close unnecessary Excel windows after saving your work, then reopen one instance and retry. Do not close a process that may contain unsaved work. If Excel freezes, allow time for a large request to finish and check for a prompt before forcing it to quit.
For an export that produces a file rather than populating the open workbook, check the destination folder, filename, and file type. Confirm the file was not saved to a different default location and that another application is not holding it open. If your organization uses document-management software, follow its rules for downloading or saving market data.
Use a safe workaround while the integration is investigated
If the Terminal screen provides an approved copy or download option, use it only in accordance with your Bloomberg subscription and employer’s data-handling rules. A permitted CSV or other supported file can be opened in Excel and saved as a workbook, but a static file generally will not refresh like an add-in-driven workbook. Keep the source, retrieval time, and any relevant field or date details with the file so readers know what it represents.
For recurring work, ask Bloomberg support or your firm’s market-data team whether a supported Excel Add-In workflow, data feed, or other licensed delivery method is appropriate. Do not substitute screen scraping, unofficial browser extensions, or scripts that copy protected content. Those methods can be unreliable and may conflict with access controls or data-use terms.
Excel for the web does not run the Windows desktop Bloomberg add-in in the same way as desktop Excel, and a workbook opened there may not refresh Bloomberg-specific data. On Mac, Bloomberg functionality and installation options can differ from a Windows desktop deployment. Confirm the current supported setup with Bloomberg or your organization rather than following Windows add-in steps on another platform.
When to contact Bloomberg or your IT team
Escalate when the add-in is missing after a managed installation, the same failure affects multiple workbooks, a clear access or connection error appears, or a Terminal export cannot communicate with Excel in a corporate environment. Include practical details: your operating system, desktop or remote-session setup, Excel version, the Bloomberg screen or tool involved, the time of failure, and the exact error message. Redact account identifiers and sensitive data before sending screenshots or files.
Ask whether the problem is known to affect a particular deployment, whether your account has the required entitlement, and whether the add-in needs repair or an approved update. This gives support enough information to separate a local workbook problem from an installation, network, policy, or permission issue.
Frequently Asked Questions
Why is the Bloomberg tab missing in Excel?
It may not be installed for that Office profile, may be disabled, or may not be supported in the Excel environment you opened. Check File > Options > Add-ins in desktop Excel on Windows, then ask your administrator about the approved installation if Bloomberg is absent.
Why does Bloomberg export open a blank Excel workbook?
The export may have completed without the expected range, the source screen may not have returned data, or the Terminal may have opened a different Excel session. Retry from the same screen with Excel already open and a blank workbook, then compare with the source and check for prompts or access messages.
Why do Bloomberg formulas show errors or stop updating?
Possible causes include a disconnected Bloomberg session, a disabled add-in, incorrect security or field inputs, unavailable data, or missing entitlements. Check the exact error and test a known-good request; ask Bloomberg support to interpret errors tied to your account or data access.
Can I use the Bloomberg Excel Add-In in Excel for the web?
The Windows desktop Bloomberg add-in is not the same as a web-based Excel feature. A workbook may open in a browser without Bloomberg-specific formulas being able to connect or refresh. Use a supported desktop setup or confirm an approved alternative with Bloomberg and your organization.
Will copying Bloomberg data into a CSV fix the problem?
It can be a temporary option if the Bloomberg screen offers an approved file or copy method and your data-use rules allow it. The result is typically a static snapshot, not a live Bloomberg-linked workbook, so record its source and retrieval time and do not treat it as automatically refreshed.
Related
- Excel Merge Cells Greyed Out? Causes and Fixes
- Excel: Make Rows Collapsible with Grouping and Outlines
- Excel Merge Two Cells With Text Without Losing Data
Try it: the Formula Explainer: paste any formula and see each function and reference in plain English.
More in Errors & fixes
- Excel Web Import CSV: Open, Load, and Fix DataTo import a CSV into Excel for the web, open a workbook and choose Data > Get Data…
- Lookup Value Not Working in Excel? Fix the CauseA lookup value usually fails in Excel because the lookup and source values do not match exactly, the…
- Why Is My VLOOKUP Not Working? Excel FixesVLOOKUP usually fails because the lookup value does not exactly match the first column of its table, the…
- LEFT Function Not Working in Excel? Fix ItIf LEFT is not returning the characters you expect, check the formula, the character count, and whether the…
- VLOOKUP #VALUE! Error: Causes and FixesA VLOOKUP formula returns #VALUE! most often when its column index argument is less than 1, or when…
- Excel: How to Prevent #REF! Errors When Deleting RowsExcel cannot guarantee that formulas will survive deleting the cells they refer to: those references can become #REF!.…
Sources: Function behaviour and menu paths: Microsoft Support documentation for Excel. Method & sources
Spotted an error in this guide? Let us know.